Router#show interface e0/0 Ethernet0/0 is up, line protocol is down Hardware is AmdP2, address is 0009.4375.5e20 (bia 0009.4375.5e20) Internet address is 192.168.1.53/24 MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, reliability 172/255, txload 3/255, rxload 39/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) ARP type: ARPA, ARP Timeout 04:00:00 Last input never, output 00:0...
Router#show interfaces e4/0 Ethernet4/0 is up, line protocol is up Hardware is Lance, address is 000b.bf30.f470 (bia 000b.bf30.f470) Internet address is 1.1.1.9/24 MTU 1500 bytes, BW 10000 Kbit, RxBW 5000 Kbit, DLY 1000 usec, reliability 255/255, txload 1/255, rxload 254/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:00, outpu...
Switch#show ip interface ? Async Async interface BVI Bridge-Group Virtual interface CTunnel CTunnel interface Dialer Dialer interface FastEthernet FastEthernet IEEE 802.3 Filter Filter interface Filtergroup Filter Group interface GigabitEthernet GigabitEthernet IEEE 802.3z Lex Lex interf...
cisco “show interface”命令输出内容的详解 Switch# show interfaces fastethernet 0/13 FastEthernet0/13 is up,line protocol is up (第一个UP指出了端口的物理层或数据链路层的状态为活动的;如果为down,表明链路在物理上是断开的,没有检测到链路;如果为administratively down,表明端口被使用shutdown命令关闭掉了。 第二个UP指出了第二层的状态为活动的;如果为down,则表明第二层软件出现错误。) Hardware is Fast E...
本帖最后由 yshihyu 于 2012-07-21 01:28 编辑 [code]public static interface IRequest { public void execute(); } [/code][code]public interface IRequest { public void execute(); } [/code]请问 inferface 有无加上 static 差异在哪? 谢谢
class Car{ } class FastCar extends Car implements ISpeedInfo { function getMaximumSpeed() { return 150; } } class Street { protected $speedLimit; protected $cars; public function __construct($speedLimit = 200) { $this->cars = array(); $this->speedLimit = $speedLimit; } protected function isStreetLegal($car) { i...
java interface的一个经典实例 import java.io.*; interface CAR { void start(); void stop(); } class SmallCar implements CAR { public void start() { System.out.println("smallcar start..."); } public void stop() { System.out.println("smallcar stop!"); } } class BigCar implements CAR { public void start() { System.out.println("bigcar sta...
================================================ PHP5里的接口(interface)到底有什么用? 看了些资料,依然觉得很迷糊,php5的接口只是提供了一些空的function而已,实际的方法依然在各个class里面,并且要使用这些function的时候依然要先实例化这些class,那么,接口,到底起个什么作用?? =====================================...
interface can have three kinds of members: 1. field 2. method 3. nesting(嵌套)class or interface In the interface, the field is always public, static and final. But generally we can omit(省略)them. Them must have initalize values, because final field can not be null. The methods in interface are always abstract and public, they can not be native, synchronized or strctfp. They can't be static too...
和内核沾点边,来这里求助了, 我想在用户层分别得到使用磁盘,cpu最高的几个进程(或者进程组), 不知道该如何实现, linux下有个iotop能以类似top(1)的形式显示进程的I/O利用情况,但是那个软件是python写的,我读起来很(非常)吃力, 他大致是先在从proc读到进程列表,然后又读了 /proc/xxpid/status, 然后用netlink获得某些进程的taskstats 不清楚从proc pid status下他想读什么,貌似是读进程的uid,gid之类的东东 [code] // /usr/incl...
Improving Guest Operating System accounting for Descheduled Virtual Machines in ESX Server 3.x Systems