ChinaUnix.net
相关文章推荐:

cisco vpn client 开机启动

怎么样才能让nt上的vpn client在每次nt重启后都能自动启动啊?最好不要人工干涉

by iwanthome - 服务器应用 - 2004-12-17 15:41:01 阅读(1740) 回复(0)

相关讨论

在linux (Fedora Core 3)路由器上使用自带的PPTP client设置完成一个vpn拨号,但每次重启之后,需要手工去进行拨号和添加路由 是否能够开机时候PPTP client自动完成vpn拨号和添加相应路由信息? 请教高手如何设置,多谢

by jasoncameron - 网络与硬件 - 2006-11-05 14:56:26 阅读(936) 回复(0)

Enviroment: vpnclient-linux-x86_64-4.7.00.0640-k9.tar.gz Fedora Core: 2.6.11-1.1369_FC4 when i use 'vpnclient connect', there is an error: vpnclient: error while loading shared libraries: /opt/cisco-vpnclient/lib/libvpnapi.so: cannot restore segment prot after reloc: Permission denied how to resolve it?

by godwin - Linux论坛 - 2006-08-21 10:51:37 阅读(1513) 回复(8)

PIX Version 7.0(1) names ! interface Ethernet0 nameif outside security-level 0 ip address 172.29.6.1 255.255.255.0 ! interface Ethernet1 nameif inside security-level 100 ip address 172.29.131.1 255.255.255.0 ! enable password 90RBsEWodTGO2XFL encrypted passwd 2KFQnbNIdI.2KYOU encrypted hostname pix ftp mode passive access-list nonat extended permit ip 172.29.131.0 255.255.255.0 10.1.1.0 255.255...

vpn思科

by bu - 网络技术文档中心 - 2006-05-05 16:27:50 阅读(776) 回复(0)

我通过ipsec连接了路由器,获得一个ip 地址如: 192.168.1.10,网关也是192.168.1.10 请问 1、如何来获得正确的网关 2、如何使我的cisco vpn client 学习到路由功能,可以在route details 上看到

by onidle - 服务器应用 - 2004-06-15 10:14:52 阅读(1150) 回复(0)

请问有谁在linux成功使用cisco vpn client吗? 系统版本是什么?cisco vpn client版本是多少?我的是CentOS4.3,我安装了,但是启动的时候出错,可能是不支持这么高的kernel吧。 cd[root@centos ~]# /etc/init.d/vpnclient_init start Starting /usr/local/bin/vpnclient: insmod: error inserting '/lib/modules/2.6.9-34.EL/ciscovpn/cisco_ipsec.ko': -1 Invalid module format Failed (insmod)

by hanccy - 网络与硬件 - 2006-08-20 15:46:59 阅读(733) 回复(0)

在XP系统上安装cisco vpn client(4.3)后不能使用,点击cisco Systems vpn client后出现“usage: vpngui [-c | -sc [-sd] [-user] [-pwd | -eraseuserpwd]] " ,不能使用,删除后重装还是一样,不知问题出在哪里?怎么解决?望各位大侠指教!

by tyhl1999 - 服务器应用 - 2006-09-05 11:27:20 阅读(2916) 回复(1)

有如下提示: Secure vpn Connection terminated locally by the client Reason :The remote peer is no longer responding 什么原因?

思科

by liangxinf - 网络技术 - 2005-06-08 09:43:17 阅读(2697) 回复(4)

wr t Building configuration... Current configuration : 4070 bytes ! version 12.2 service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname 2651 ! boot system tftp c2600-ik9o3sw6-mz.122-8.T.bin 192.168.22.5 aaa new-model ! ! aaa authentication login default group radius aaa authentication login console none aaa authorization network groupauthor local ...

vpn思科

by zhangyan_ou - 网络技术 - 2005-01-12 20:08:18 阅读(1485) 回复(1)

环境:PIX515+cisco vpn client 4.05 本地验证,IP池用和内网统一的一段。 client端用的网卡分配固定ip接入互联网。 问题:vpn client 连上PIX后,把本地网卡的默认网关屏蔽了,默认网关指向PIX分给该客户端的IP,即:本地IP和网关ip是一样的,导致无法上网,只能连入内网。 请问:1.怎么给client分配网关,让其上网时就转入内网通过PIX再上网,或者,不干预原有的网络环境,仅仅对内网访问时走vpn连接。 另:我准备...

by zhaoxjss - 服务器应用 - 2004-09-07 14:20:06 阅读(2194) 回复(1)

我通过ipsec连接了路由器,获得一个ip 地址如: 192.168.1.10,网关也是192.168.1.10 请问 1、如何来获得正确的网关 2、如何使我的cisco vpn client 学习到路由功能,可以在route details 上看到

by onidle - 服务器应用 - 2004-06-15 10:14:50 阅读(1111) 回复(0)