ChinaUnix.net
相关文章推荐:

armlinuxldno machine record defined

no machine record defined 編核心時,遇到下面這個問題 arm-9tdmi-linux-gnu-ld: no machine record defined 在 google 查到的都是說將arch/arm/kernel/vmlinux.lds的最後兩行(如下),給註解起來,但都沒說是為了什麼 ASSERT((__proc_info_end - __proc_info_begin), "missing CPU support") ASSERT((__arch_info_end - __arch_info_begin), "no machine record defined") 後來自己到 arch/arm/kernel/vmlinux.lds 裡看的時候...

by edwinrong - HP文档中心 - 2008-08-07 19:05:12 阅读(1956) 回复(0)

相关讨论

大家好。我在VM上装了OB。大概300M左右。 但最近发现硬盘上的大小是2.3G,但是我用 [code]#df -h [/code] 发现才400M左右。这是什么?

by zlhgood - BSD - 2008-04-09 12:16:57 阅读(1892) 回复(7)

摘自: http://publib.boulder.ibm.com/infocenter/systems/scope/hw/index.jsp machine Types Look here for machine types and descriptions. machine Type Description 3151 Display Terminal 3161 Display Terminal 3163 Display Terminal 3514 External Disk Array, Models 212 and 213 3812 Pageprinter 3852 Printer 4201 Proprinter II 4202 Proprinter XL 4207 Proprinter X24 4208 Proprinter XL24 4216 Pe...

by feiaix - AIX - 2007-12-27 22:22:51 阅读(1557) 回复(1)

it's easy to use #ifdef MAX #...... #endif but how about a predined max(a,b) ((a)>(b) ? (a) : (b)) ? #ifdef max or #ifdef max(a,b) or something else? if it's #ifdef max(a,b), does C compiler check whether the paramenters must be a,b? like, #ifdef max(x,y) ? i'm confused, but hopefully i made myself clear. thank you in advance.

by hcq0411 - C/C++ - 2007-03-28 13:58:43 阅读(1310) 回复(3)

Hierarchical State machine Hierarchical State machine Documentation Hierarchical State machine Source Code In this article, we will be highlighting the advantages of hierarchical state machine design over conventional state machine design. In conventional state machine design, all states are considered at the same level. The design does not capt...

by sohu2000000 - Java文档中心 - 2008-07-19 16:47:30 阅读(2705) 回复(0)

java虚拟机是不是提供了编写java程序的API呢?

by zhn636 - Java - 2007-09-04 14:38:46 阅读(2099) 回复(4)

有没有哪位朋友可以简单说一下machine pool的概念,及甚么作用。机器的内存有8G,那machine pool大致应该调整到多少较为合理呢?谢谢。余下3个值的情况又该如何? [ 本帖最后由 tamashii 于 2007-3-14 21:18 编辑 ]

by tamashii - AS400 - 2007-03-15 12:06:16 阅读(2013) 回复(1)

1.对java技术做了介绍,给出了java体系结构的纵览。讨论了为什么java的重要性以及java的优缺点 2.展示了java体系结构是如何让程序在任何平台上运行的,讨论了决定java程序实际可移植性的要素,还考察了如何在可移植性及性能方面保持相应的平衡 3.对内置于java核心体系中的安全模型进入深入的概述,追踪java安全模型的演变过程--从1.0版本的沙箱到1.1版本的代码签名和验证,再到1.2版本的细粒度访问控制 4.考察了java带来的网络移...

by scounixadmin - Java文档中心 - 2006-01-20 10:54:48 阅读(919) 回复(0)

我有一台Compaq DS20E的机器, 装了Debian3.1以后,系统提示 设置完毕,可以登陆了。 但是一直就没有登陆窗口出现。 问题好像是显示器频率和设置的频率 不匹配。但是我试了两个显示器, simple模式设置为17寸的,但是连 19寸的显示器都不能工作。 有没有什么办法让我进到command line 模式啊?有什么办法改变频率么? 谢谢! ctrl + alt + f1根本不起作用。

by wllxtt - 系统管理 - 2005-12-13 03:16:29 阅读(515) 回复(0)