howto remove unkonw disk form LVM
1,Backup all user data in the volume to be removed (Use fbackup, cpio or tar backup utilities as appropriate.) 2,Determine the names of the logical volumes residing in the volume groups to be removed # lvdisplay /dev/vgXX/lvol* 3,unmount all logical volumes in the volume group to be removed # cd / # umount /dev/vgxx/lvol* 4,remove the logical volumes found in step2 from the volume group # lvremov...
by 古月石 - HP文档中心 - 2006-12-16 12:39:56 阅读（1037） 回复（0）
Steps Step 1: Create your CCK content type Step 2: Create a [yourcontenttype].tpl.php file Step 3: Modify template.php Step 4: Modify style.css Step 1: Create your CCK content type Create a CCK content type called 'event_listing' and add some fields to it. I have added contact information, location, event information fields etc. Create at least one node (create an event listing with your new conte...
# pvcreate -f /dev/rdsk/c0t4d0 # mkdir /dev/vg05 # mknod /dev/vg05/group c 64 0x050000 # vgcreate /dev/vg05 /dev/dsk/c0t4d0 # lvcreate -L 100 vg05 # lvcreate -L 100 vg05 # newfs /dev/vg05/rlvol1 # newfs /dev/vg05/rlvol2 # mkdir /vg5lv1 /vg5lv2 # mount /dev/vg05/lvol1 /vg5lv1 # mount /dev/vg05/lvol2 /vg5lv2 # vgcfgbackup vg05 Extend An lvm Logical Volume: # lvextend -L 200 /dev/vg05/lvol2 # umou...
[color="#000000"]Web[color="#000000"]me09.cublog.cn howto: Convert a dynamic disk back to a basic disk without data loss Posted By: [email=ben@coresite.org][color="#0000ff"]o2[/email] **Disclaimer: This ONLY works if you have NOT used ANY of the "new" features of dynamic disks such as extending a partition or software RAID. This is an expert-level procedure, so if you don't know what you are...
文件: 逻辑卷管理.pdf 大小: 1404KB 下载: 下载 在操作lvm配置之前，一定要收集备份lvm相关信息，备份为王 ioscan -f disk lvlnboot -v vgcfgbackup vgdisplay -v pvdisplay -v lvdisplay -v strings /etc/lvmtab /stand/bootconf lvm 磁盘布局分两种类型，一种用于引导磁盘，另一种用于所有其他 lvm 磁盘。这 些磁盘的数据结构存在不同。不可引导的磁盘有两个保留区域：物理卷保留区域 (PVRA) 和卷组保留区域 (VGRA)。可引导磁盘...
While all nodes are participating in the cluster, perform the following steps on one node only. 1. Identify which logical hosts must be reconfigured to exclude the network interface. All of these logical hosts will need to be unconfigured then reconfigured. Run the scconf -p command to print out a list of logical hosts in the current configuration; save this list for later use. You do not need to ...
Let's assume that our FreeBSD installation is on a 4 gigabyte drive (ide master ad0) and we would like to move it to a new 20 gig drive. What you need to do is remove the old hard disk , install the new [20G] drive as an ide master and perform a minimal clean install of FreeBSD, setting up the partitions exactly how you want them. Be se sure to set the drive as bootable and boot from it one...
我的A5000阵列里有从别的阵列里取过来的硬盘,再通过veritas划分disk group时,能够识别到这些硬盘里的原始信息,包括disk group名称,disk名称,我在remove这些原来的disk droup时,提示: VXVM:vxdg :error:disassociating disk-media diskname : Cannot remove last disk in disk group 为什么??
rootdg 3块盘 rootdisk rootmirror roothotspare 想删掉roothotspare怎么做啊(solaris)
rootdg 3块盘 rootdisk rootmirror roothotspare 想删掉roothotspare怎么做啊
