开机启动是提示entering boot debugger\r\n[0:5b]\r\n怎么解决?\r\n请高手给于帮助!\r\n谢谢!
我在/etc/vsftpd/vsftpd.conf文件结尾添加了: listen_port=111 ftp_data_port=112 使用ftp时出的报错信息如下: ftp> ls 200 PORT command successful. Consider using PASV. 425 Failed to establish connection. ftp> passive Passive mode on. ftp> ls 227 entering Passive Mode (11,157,69,9,210,226) ftp: connect: A remote host did not respond within the timeout period. 向各位请教是什么问题,帮忙解决一下!
大家好: 我们使用的是suse 9客户端,ftp登录到某机器后,ls文件时都会显示 entering Extended Passive Mode (|||40044|),put文件时提示 no data found. 要在ftp>提示下运行 epsv4 off 命令后,才能正常传送文件,请问这个怎么彻底解决?如果每次ftp时都要运行epsv4 off命令,这样很麻烦。 可以提供一下彻底的解决方法?不用每次ftp传文件时,都要在ftp>提示下运行 epsv4 off 命令。 ----- 待复,感谢!
大家好: 我们使用的是suse 9客户端,ftp登录到某机器后,ls文件时都会显示 entering Extended Passive Mode (|||40044|),put文件时提示 no data found. 要在ftp>提示下运行 epsv4 off 命令后,才能正常传送文件,请问这个怎么彻底解决?如果每次ftp时都要运行epsv4 off命令,这样很麻烦。 可以提供一下彻底的解决方法?不用每次ftp传文件时,都要在ftp>提示下运行 epsv4 off 命令。 @chenyx ----- 待复,感谢!
[root@SZQX992 ~]# ftp 192.168.34.41 Connected to 192.168.34.41 (192.168.34.41). 220 (vsFTPd 2.0.5) Name (192.168.34.41:root): qxlogin 331 Please specify the password. Password: 230 Login successful. Remote system type is UNIX. Using binary mode to transfer files. ftp> ls 227 entering Passive Mode (172,17,140,138,119,13) "Ctrl+C" receive aborted waiting for remote to finish abort ftp> passive Pas...
安装solaris10在X86下错误如下 Boot panic:trap tape d,error o at 139ac0 xxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxx entering boot debugger: [139ac0]: 看一下置顶贴:注意发贴的标题,已改 [ 本帖最后由 doni 于 2006-2-16 09:41 编辑 ]
安装solaris10在X86下错误如下 \r\n Boot panic:trap tape d,error o at 139ac0\r\nxxxxxxxxxxxxxxxxxx\r\nxxxxxxxxxxxxxxxxxx\r\n entering boot debugger:\r\n [139ac0]:\r\n\r\n看一下置顶贴:注意发贴的标题,已改\n\n[ 本帖最后由 doni 于 2006-2-16 09:41 编辑 ]
os: centos6.3 mini server 用yum-downloadonly插件down下来httpd几个文件 放在了文件目录httpd-2.2.15里面。准备安装,如下图,新手,求解决方法,谢谢各位了。