ChinaUnix.net
相关文章推荐:

mount is not a block device maybe try `o loop'?

Dear All : 我把另一顆硬盤接到系統,然後在ok mode下boot -rs,重開後認到在/dev/rdsk/下為c0t1d0s0 ~ s7,然後我mount卻出現not a block device #mount /dev/rdsk/c0t1d0s0 /mnt 就出現 /dev/rdsk/c0t1d0s0 not a block device 我該如何作? Thanks

by ksc - Solaris - 2004-01-12 14:21:45 阅读(2809) 回复(4)

相关讨论

转自http://www.codemaestro.com/reviews/review00000102.html 好坏就不评价了 Loop Unrolling with Duff's device Loop unrolling, or unwinding, is simply reducing the number of overhead instructions that the CPU has to execute in a loop, thus improving the cache hit rate and the loop's run time. As a simple demonstration, the following example code copies 100 values from the memory pointed by from, t...

by wxp95 - C/C++ - 2006-10-22 07:57:35 阅读(1319) 回复(0)

unixware下mknod b建立的设备和mknod c建立的设备有什么不同。(block 和char有什么不一样) block device是否真正的raw device(裸设备) 是否只有char device(字符设备)可以direct IO(async io)而block device不可以。

by chenfeng825 - 其他UNIX - 2003-08-22 15:05:23 阅读(1208) 回复(4)

各位好, 我的系统使rh as3 update2 但是usb的u盘不能用。 看网上说加载sd_mod的module。 我用insmod sd_mod modprobe sd_mod lsmod 能看到那个模块,但是是unused。 所以我的u盘还是不能用, 请问有没有什么解决办法? 另外,我的debian3.0 r2能找到sd_mod.o 但是insmod不让加载,请问是什么原因? 多谢。

by haoniukun - 内核/嵌入技术 - 2004-12-10 10:36:15 阅读(904) 回复(5)

我的系统在mount initrd /mnt -o loop时候显示 Couldn't setup loop device 但是我把系统chroot后 则可以mount了 我查看了一下两个根文件系统下/dev/loop0 都是一样的啊 还有那里关系到这个问题吗?

by crashsky - 内核/嵌入技术 - 2006-08-25 09:24:15 阅读(684) 回复(1)

我想在windows下使用linux上已经做好的loop device 文件,请问可以吗?用什么模拟可以呢?

by woflyin - Windows系统 - 2005-09-08 11:30:41 阅读(1415) 回复(0)

如何设置tape device block size,是在st.conf中配置什么参数吗?EBS安装手册中说要把tape device block size mode设置成variable,不知道怎么设置?

by liuchuanwenno1 - Solaris - 2007-08-22 15:53:54 阅读(2918) 回复(7)

没有存储,想用NBD共享一台LINUX主机的磁盘?有用过的介绍一下使用方法!谢谢!

by xuefg - Linux论坛 - 2004-10-21 09:55:08 阅读(911) 回复(5)

usb 2.0 HD 插上后 在 /dev/usb/ 下出现 mass-storage0 文件。 执行 mount -F pcfs /dev/usb/mass-storage0 /mnt 出现 block device required 错误 察了好久以前的文章也没人说的清楚。 请阿侠们帮忙!!!在此谢过先

by mojo2 - Solaris - 2011-03-03 22:42:24 阅读(6595) 回复(7)

mount的loop参数是什么意思呢?

by 麦克马拉曼 - 数据安全 - 2007-10-06 17:08:55 阅读(6013) 回复(3)

比如我在linux里可以mount: mount file /mnt/1 -o loop 这个动作可以放在/etc/fstab里就执行吗? 因为我在启动时要start nfs服务,export 的目录就是/mnt/1

by hppyhjh - 内核/嵌入技术 - 2005-05-16 11:01:57 阅读(1053) 回复(5)