ChinaUnix.net
相关文章推荐:

nios 总线 引出

nios ide中用int型数组访问外设时,可以不用在硬件程序中特殊处理address。尽管c程序编译结果访问的地址都为4的倍数,但address线直接忽略地址低2位,因此address线仍是连续的。

c程序如下:
  1. #include <system.h>
  2. #include <stdio.h>

  3. int mai...

    by FBI888XH - 移动操作系统 - 2011-12-20 09:44:08 阅读(730) 回复(0)

相关讨论

在FPGA上搭建nios系统,在上面实现hello world应用,总是出现如下错误:
Reading System ID at address 0x00000808: 
    ID value does not match: read 0xFFFFFFFF; expected 0x5E5B656D
    Timestamp value does not match: image on board is older than expected
    Read timestamp  7:59:59 1970/01/01; expected &...

by FBI888XH - 移动操作系统 - 2011-02-23 10:30:27 阅读(670) 回复(0)

主要参考http://blog.ednchina.com/summerooooo/1770874/message.aspx


在本例中不通过pio,直接自定义外设控制irq信号,实现中断处理。

硬件部分:
自定义一个简单的键盘控制器,按下FPGA板上的键盘就产生irq中断信号。
其源代码如...

by FBI888XH - 移动操作系统 - 2011-12-20 09:44:09 阅读(820) 回复(0)
by engelbert - 移动操作系统 - 2011-12-22 08:51:04 阅读(475) 回复(0)
by engelbert - 移动操作系统 - 2011-12-22 08:51:04 阅读(599) 回复(0)
by engelbert - 移动操作系统 - 2011-12-22 08:51:04 阅读(695) 回复(0)
by engelbert - 移动操作系统 - 2011-12-22 08:51:04 阅读(587) 回复(0)

本资源回复后,可见下载链接

linux

by 戴墨镜的乌龟 - 服务器资源下载 - 2011-04-20 14:59:27 阅读(916) 回复(1)

如题,make menuconfig时出现如下错误: config/mkconfig > config.in make -C /root/uClinux-dist-test/config/scripts/lxdialog all make[1]: Entering directory `/root/uClinux-dist-test/config/scripts/lxdialog' /soft/nios2/bin/../lib/gcc/nios2-linux-uclibc/3.4.6/../../../../nios2-linux-uclibc/bin/ld.real: cannot find -lncurses collect2: ld returned 1 exit status >> Unable to find the Ncurses libraries....

by xie210216 - 嵌入式开发 - 2008-04-28 18:21:09 阅读(1673) 回复(1)