用以下命令更改redhat8系统的网卡mac地址后,发现网络中其他的机器都无法ping通这台机器了,IP地址没有变,只是改了mac地址! ifconfig eth0 down ifconfig eth0 hw ether newmacaddr ifconfig eth0 up 请教这是为什么?
在linux系统下面,我要用程序来读取网卡的基本信息以及配置网卡,不知道该如何来做,请各位大虾指点。 我用if_nameindex()函数和ioctl()函数可以取到配置的网卡的IP和netmask。要得到更详细的信息,如:网卡名称、mac地址等,不知该如何实现? 在程序中怎么样来添加、激活和删除网卡,就是对网卡进行配置。不知道如何来做,要用到哪些系统函数?
一、修改mac地址方法 linux环境下: 需要用 #ifconfig eth0 down 先把网卡禁用 再用ifconfig eth0 hw ether 1234567890ab 这样就可以改成功了 要想永久改就这样 在/etc/rc.d/rc.local里加上这三句(也可以在/etc/init.d/network里加下面三行) ifconfig eth0 down ifconfig eth0 hw ether 1234567890ab ifconfig eht0 up 二、修改IP地址的方法 #ifconfig ethe0 down #ifconfig ethe0 192.168.169.245 netmask 255.255.255.0 以...