ChinaUnix.net
相关讨论

最近在做Rt5350的项目,找到了sdk4.0,编译的uboot.img固件烧写到spiflash里面后,启动不了。编译的时候,我选了下目标版,其他都是默认,直接make 请教大能,你们的uboot怎么编译的呀?是否需要把目录下board/rt2880复制一份,改成rt5350呀

by x56008 - 嵌入式开发 - 2013-11-04 16:37:02 阅读(1688) 回复(4)

最近买了个E680的水货手机。本来我手里手机很多了,不过没有一个是Linux的,觉得比较可惜,这可是我的职业 :)。听说E680水货比较便宜,而且在"移动天使"(http://club.ccmove.com/)上的fans正DIY地热火朝天,比较眼热。 冲着E680的DIY性能,我决定买了一个。 在“移动天使”论坛上,大部分DIY的程序是从OPIE拿过来的,所以在E680上必须加载另外一个QT库和OPIE的库,比较浪费资源。幸亏liuto大侠拿到了EZX的sdk,我赶紧下载下来了。很...

by ppllxx - Linux文档专区 - 2006-06-09 23:00:08 阅读(557) 回复(0)

I just lost one day in order to configure "Linksys WMP54G PCI card v4.1" on Fedora 7, and I want share what I do, hope useful for other user. I add some stuff in order to solve the problem of network startup that doesn't able to verify the LINK Status of ralink RT61 driver. I discover that the Link status of ralink is not detected by the "ethtool" application, used on Fedora script to detect the s...

by openvod - Linux文档专区 - 2008-02-24 22:44:32 阅读(1291) 回复(0)

最近忙活无线ap实验,在运行#hostapd hostapd.conf 后出现: Configuration file: /etc/hostapd/hostapd.conf rfkill: initial event: idx=0 type=1 op=0 soft=0 hard=0 nl80211: Register frame command failed (type=208): ret=-114 (Operation already i n progress) nl80211: Register frame match - hexdump(len=1): 06 nl80211: Failed to register Action frame processing - ignore for now nl80211: Add own interface if...

by LenKernel - Linux新手园地 - 2013-01-22 09:52:17 阅读(1762) 回复(0)

有没有高端的无线ap产品,有几个功能看能否实现 1.能够覆盖100平米范围内的50台电脑 2.几个ap能够构成一个无线局域网,其essid是同样设置,在用户端只设置一个essid即可,有信号就能接受到。 谢谢!

无线

by netwareman - 网络技术 - 2008-08-27 15:17:39 阅读(1866) 回复(3)

有没有高端的无线ap产品,有几个功能看能否实现\r\n1.能够覆盖100平米范围内的50台电脑\r\n2.几个ap能够构成一个无线局域网,其essid是同样设置,在用户端只设置一个essid即可,有信号就能接受到。\r\n谢谢!

by netwareman - 企业网管技术交流区 - 2008-08-27 15:17:39 阅读(3248) 回复(3)

哪位大侠做过无线网卡的驱动,其中用软ap将无线网卡用做wireless access point. 请传授一下经验.

by yypzgmmm - 网络技术 - 2008-05-09 17:41:52 阅读(1661) 回复(0)

哪位大侠做过无线网卡的驱动,其中用软ap将无线网卡用做wireless access point. 请传授一下经验.

by yypzgmmm - 企业网管技术交流区 - 2008-05-09 17:41:52 阅读(3168) 回复(0)

sdk manager 在升级时有可能碰到无法访问目录的问题,这有可能是tool,或者temp目录正在被升级程序自己在用的情况下,导致无法更改。

解决方法:

XP: 复制tool目录,执行android.bat,然后升级。

WIN7: 选择管理员帐号执行就可以。

by yesblue77 - 移动操作系统 - 2011-12-22 08:51:07 阅读(587) 回复(0)

请问各位大霞一个问题: sdk的英文全称是什么?它是做什么用的?

by weizzil_chinaun - C/C++ - 2004-02-20 15:24:28 阅读(678) 回复(3)