LOTUS domino7: module for lotus 是3.0的 全路径下执行nsrnotesv -z nnsrnml_config.template,提示如下:either nothing was specified to backup or system is down.直接执行nsrnotesv报错:the loadlibrary<> call failed。经查看LEGATO文档,说是NNOTE.DDL文件路径在nnsrnml_config.template(NOTES_EXECDIRECTORY)文件中设置的不对,经检查没有问题。 nnsrnml_config.template已经配置过PATH和NOTES_EXECDIRECTORY。多谢指...
上海猎头公司招聘:工作地点:上海北京都可以 一、PBX系统集成工程师 工作地点:上海和北京 精通AVAYA 电话交换机的选型、配置及安装调试。熟悉一般交换机(如松下、NEC、西门子等)的配置及安装调试。 有一年以上相关工作经验 二,IVR开发工程师 工作地点:上海和北京 1、 熟悉IVR开发流程; 2、 2年以上IVR开发工作经验,熟悉Avaya平台,团队合作精神,良好的沟通能力和学习、技术钻研能力; 3、 熟悉SQLServer数据库编...
最近在学习关于linux的Kernel以及modules方面的内容,今天刚试验成功了一次,特此写出具体过程,分享一下我的经验。 ========================================== Stage 1: To modify the kernel to add our own system call ========================================== 1. Download the linux kernel 2.6.18 from kernel.org to /usr/src/ cd /usr/src/ && wget http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.18.ta...
1. i use RH9.0 linux. gcc version is 3.2.2. 2. the source files is : a.cxx is: void my_fun( void) { } a.h is : void my_fun( void); b.c is : #include "a.h" int main( void) { my_fun(); } 3. then i will compile . g++ -c -g a.cxx -o a.o gcc -c -g b.c -o b.o ld a.o b.o -o a.out but the ld complain that ld: warning: cannot find entry ...
[code] 注:偶忘记在那里发现的了,文章虽然很简单,但是对初学者还是很不错哦 如何在 linux Kernel 内新增一个 System call 使用 system call 去呼叫系统的函式是非常好玩的,但是要如何写出一个自己的system call 呢?这边有以下数个步骤,如果你是自己想要呼叫 system call 那可以跳过 (1) (2) 直接到第三项这边假设你己经熟悉 kernel 的 compile 和如何利用新 compile 的 kernel 重新开机 (1) 设定 include 档内的 sysc...