i have linux 9.0 and winXP on my pc. for some days i do not use linux, and one day when i select to boot to linux, the GRUB becomes a black-white charactor interface. when i use the command: "root(hd0, ", and press key [tab] to show the useable partiton, it show me that most partition is "file system type unknow", except a fat32 and swap partiton. i have several NTFS partitions and a fat32 partit...
WARNING: /sbus@1f,0/SUNW,fas@e,8800000/sd@2,0 (sd2):
Error for Command: load/start/stop Error Level: Retryable
Requested Block: 0 Error Block: 0
Vendor: SEAGATE Serial Number:
Sense Key: Not Ready
ASC: 0x4 (LUN not ready), ASCQ: 0x0, FRU: 0x2
ABLE DISK SELECTIONS:
0. c0t0d0
一台A5000接两台sun主机,但为什么一台主机可以正常发现到阵列上的5个盘, format状态正常:
AVAILABLE DISK SELECTIONS:
0. c0t0d0
screen: unknown terminal type I don't know what kind of terminal you are on - all I have is 'screen'. [Using open mode] 在linux上跑screen，登录到solaris上，使用vi，就报上面的错误。 搜了一下 -bash-3.00$ echo $TERM screen -bash-3.00$ export TERM=vt100 这样就没问题了。 本文来自ChinaUnix博客，如果查看原文请点：http://blog.chinaunix.net/u/25477/showart_412977.html
E4500的机器，突然系统可不访问，重启之后不能引导：
“Can't read disk label.
Can't open disk label package
Can't open boot device”
然后用光盘引导到单系统模式下，使用format命令查看：
“ 0. c0t10d0
请问大家 我执行 vi 会出线以下文字: unknown terminal type 请问该设定哪些来修正此文字 让 vi 可以顺利运行 谢谢
A1000以前使用正常，用RM6进行管理，后来在做实验时更换过A1000里面的硬盘和控制器里面的内存，就发现在format下显示为
1. c4t1d0
[root@huabiao ~]# mount -t smb //172.29.130.4/sharedoc /home -o username=huabiao,password=chinaunix mount: unknown filesystem type 'smb' mount时候出现此提示；没有找到结果，请大家提示一下。谢谢! [root@huabiao ~]# uname -r -p 2.6.17-1.2145_FC5 i686
想重新安装solaris系统
安装不上去
boot cdrom －s
＃format
0 . c0t0d0
