ChinaUnix.net
相关文章推荐:

vt6656 arm

SPARC: Example—What to Do if You Forgot Root Password The following example shows how to recover when you forget the root password by booting from the network. This example assumes that the boot server is already available. Be sure to apply a new root password after the system has rebooted. (Use keyboard abort sequence--Press Stop A keys to stop the system) ok boot net -s # mount /dev/dsk/c0t3...

by diag - Solaris - 2003-06-13 12:16:18 阅读(1054) 回复(9)

相关讨论

今天在俺的宝贝arm板上跑起了pysqlite :em02::em02::em02: 刚好有个数据库倍份的程序要写 就用python啦 庆祝一下 :D

by bleem1998 - Python - 2006-03-02 18:13:51 阅读(1650) 回复(4)

run Linux2.4 on arm, 各位能给个思路么?

by duke_gun - 内核/嵌入技术 - 2005-01-07 15:23:59 阅读(501) 回复(5)

UNIXWARE下的vt**怎样DISABLE? 也就是相当于SCO UNIX5.06的tty**的DISABLE一样

by ivanlan - 其他UNIX - 2003-10-31 11:15:02 阅读(427) 回复(0)

http://www.cyut.edu.tw/~ckhung/olbook/liblet/vt100_reference_card.txt 经常见大家在问printf("\027[10")等是什么意思 这种就是vt100控制码 用于控制屏幕等终端设备的属性 同样可以向打印机等输出 vt100以ESC开始,在TELNET终端上同样可以使用vt100命令实现光标移动等终端控制操作 现列出如下 [code] Article 248 of comp.terminals: Newsgroups: comp.terminals Path: cs.utk.edu!gatech!udel!bogus.sura.net!opusc!usceas...

by 无双 - C/C++ - 2003-06-19 16:27:04 阅读(5256) 回复(8)

unixware711装好后,默认只有vt01-vt08能登录,请问用什么命令使vt09-vt12也出现login?

by yannanqi - 其他UNIX - 2003-08-08 16:54:25 阅读(429) 回复(1)

unixware711装好后,默认只有vt01-vt08能登录,请问怎样使vt09-vt12也出现login?

by yannanqi - 其他UNIX - 2003-08-08 14:04:21 阅读(467) 回复(2)