keelee 发表于 2007-05-14 19:43

VXvm 配置controle


#pathgroups
#KAPL10704-I dlmvxexclude terminated normally.
controllers
c2 /pci@8,600000/SUNW,qlc@1/fp@0,0
c3 /pci@8,600000/SUNW,qlc@2/fp@0,0
c5 /pseudo/dlmndrv@2
#
product
#
pathgroups
#
root@MEB1
# vxdiskadm
Volume Manager Support Operations
Menu: VolumeManager/Disk
1      Add or initialize one or more disks
2      Encapsulate one or more disks
3      Remove a disk
4      Remove a disk for replacement
5      Replace a failed or removed disk
6      Mirror volumes on a disk
7      Move volumes from a disk
8      Enable access to (import) a disk group
9      Remove access to (deport) a disk group
10   Enable (online) a disk device
11   Disable (offline) a disk device
12   Mark a disk as a spare for a disk group
13   Turn off the spare flag on a disk
14   Unrelocate subdisks back to a disk
15   Exclude a disk from hot-relocation use
16   Make a disk available for hot-relocation use
17   Prevent multipathing/Suppress devices from VxVM's view
18   Allow multipathing/Unsuppress devices from VxVM's view
19   List currently suppressed/non-multipathed devices
20   Change the disk naming scheme
21   Get the newly connected/zoned disks in VxVM view
22   Change/Display the default disk layouts
23   Mark a disk as allocator-reserved for a disk group
24   Turn off the allocator-reserved flag on a disk
list   List disk information
?      Display help about menu
??   Display help about the menuing system
q      Exit from menus
Select an operation to perform: 17
Exclude Devices
Menu: VolumeManager/Disk/ExcludeDevices
VxVMINFO V-5-2-1239
This operation might lead to some devices being suppressed from VxVM's view
or prevent them from being multipathed by vxdmp (This operation can be
reversed using the vxdiskadm command).
Do you want to continue ? (default: y)
Volume Manager Device Operations
Menu: VolumeManager/Disk/ExcludeDevices
1      Suppress all paths through a controller from VxVM's view
2      Suppress a path from VxVM's view
3      Suppress disks from VxVM's view by specifying a VID:PID combination
4      Suppress all but one paths to a disk
5      Prevent multipathing of all disks on a controller by VxVM
6      Prevent multipathing of a disk by VxVM
7      Prevent multipathing of disks by specifying a VID:PID combination
8      List currently suppressed/non-multipathed devices
?      Display help about menu
??   Display help about the menuing system
q      Exit from menus
Select an operation to perform: 1
Exclude controllers from VxVM
Menu: VolumeManager/Disk/ExcludeDevices/CTLR-VXVM
Use this operation to exclude all paths through a controller from VxVM.
This operation can be reversed using the vxdiskadm command.
VxVMINFO V-5-2-1263
You can specify a controller name at the prompt. A controller name is of
the form c#, example c3, c11 etc. Enter 'all' to exclude all paths on all
the controllers on the host. To see the list of controllers on the system,
type 'list'.
Enter a controller name [,all,list,list-exclude,q,?] list
VxVMINFO V-5-2-1214 The following controllers were found on the system :
   c1            c2            c3            c4            
   c5            
Hit RETURN to continue.
Exclude controllers from VxVM
Menu: VolumeManager/Disk/ExcludeDevices/CTLR-VXVM
Use this operation to exclude all paths through a controller from VxVM.
This operation can be reversed using the vxdiskadm command.
VxVMINFO V-5-2-1263
You can specify a controller name at the prompt. A controller name is of
the form c#, example c3, c11 etc. Enter 'all' to exclude all paths on all
the controllers on the host. To see the list of controllers on the system,
type 'list'.
Enter a controller name [,all,list,list-exclude,q,?] c2
VxVMINFO V-5-2-1306
All paths to the following enclosures through controller c2 will be hidden
from VxVM as a result of this operation :
   AMS_WMS1      AMS_WMS0      
Continue operation? (default: y)
Apr 20 16:11:41 MEDB1 last message repeated 11 times
Apr 20 16:11:45 MEDB1 vxdmp: NOTICE: VxVM vxdmp V-5-0-0 disabled controller /pci@8,600000/SUNW,qlc@1/fp@0,0 connected to disk array 77011034
Apr 20 16:11:45 MEDB1 vxdmp: NOTICE: VxVM vxdmp V-5-0-0 disabled controller /pci@8,600000/SUNW,qlc@1/fp@0,0 connected to disk array 77011077
VxVMNOTICE V-5-2-1323
The controller c2 will be disabled. The entries for paths on controller c2
will still be visible through VxVM utilities in a disabled state till a
reboot. After a reboot these entries will not be seen.
Hit RETURN to continue.
Do you wish to exclude more controllers ? (default: n) y

Exclude controllers from VxVM
Menu: VolumeManager/Disk/ExcludeDevices/CTLR-VXVM
Use this operation to exclude all paths through a controller from VxVM.
This operation can be reversed using the vxdiskadm command.
VxVMINFO V-5-2-1263
You can specify a controller name at the prompt. A controller name is of
the form c#, example c3, c11 etc. Enter 'all' to exclude all paths on all
the controllers on the host. To see the list of controllers on the system,
type 'list'.
Enter a controller name [,all,list,list-exclude,q,?] c3
VxVMINFO V-5-2-1306
All paths to the following enclosures through controller c3 will be hidden
from VxVM as a result of this operation :
   AMS_WMS1      AMS_WMS0      
Continue operation? (default: y)
Apr 20 16:11:59 MEDB1 vxdmp: NOTICE: VxVM vxdmp V-5-0-0 disabled controller /pci@8,600000/SUNW,qlc@2/fp@0,0 connected to disk array 77011034
Apr 20 16:11:59 MEDB1 vxdmp: NOTICE: VxVM vxdmp V-5-0-0 disabled controller /pci@8,600000/SUNW,qlc@2/fp@0,0 connected to disk array 77011077
VxVMNOTICE V-5-2-1323
The controller c3 will be disabled. The entries for paths on controller c3
will still be visible through VxVM utilities in a disabled state till a
reboot. After a reboot these entries will not be seen.
Hit RETURN to continue.Apr 20 16:12:00 MEDB1 picld: Device PS0 AC UNAVAILABLE
Do you wish to exclude more controllers ? (default: n) y

Exclude controllers from VxVM
Menu: VolumeManager/Disk/ExcludeDevices/CTLR-VXVM
Use this operation to exclude all paths through a controller from VxVM.
This operation can be reversed using the vxdiskadm command.
VxVMINFO V-5-2-1263
You can specify a controller name at the prompt. A controller name is of
the form c#, example c3, c11 etc. Enter 'all' to exclude all paths on all
the controllers on the host. To see the list of controllers on the system,
type 'list'.
Enter a controller name [,all,list,list-exclude,q,?] c5
VxVMINFO V-5-2-1306
All paths to the following enclosures through controller c5 will be hidden
from VxVM as a result of this operation :
   AMS_WMS1      AMS_WMS0      
Continue operation? (default: y)
Apr 20 16:12:16 MEDB1 vxdmp: NOTICE: VxVM vxdmp V-5-0-0 disabled controller /pseudo/dlmndrv@2 connected to disk array 77011034
VxVMNOTICE V-5-2-1323
The controller c5 will be disabled. The entries for paths on controller c5
will still be visible through VxVM utilities in a disabled state till a
reboot. After a reboot these entries will not be seen.
Hit RETURN to continue.Apr 20 16:12:16 MEDB1 vxdmp: NOTICE: VxVM vxdmp V-5-0-0 disabled controller /pseudo/dlmndrv@2 connected to disk array 77011077
Do you wish to exclude more controllers ? (default: n)

Volume Manager Device Operations
Menu: VolumeManager/Disk/ExcludeDevices
1      Suppress all paths through a controller from VxVM's view
2      Suppress a path from VxVM's view
3      Suppress disks from VxVM's view by specifying a VID:PID combination
4      Suppress all but one paths to a disk
5      Prevent multipathing of all disks on a controller by VxVM
6      Prevent multipathing of a disk by VxVM
7      Prevent multipathing of disks by specifying a VID:PID combination
8      List currently suppressed/non-multipathed devices
?      Display help about menu
??   Display help about the menuing system
q      Exit from menus
Select an operation to perform: 8

Devices hidden from VxVM / not multipathed by vxdmp
Menu: VolumeManager/Disk/ExcludeDevices/listexclude
VxVMINFO V-5-2-1215
The following is the list of devices currently hidden from VxVM or not
multipathed by vxdmp:
VxVM vxdmpadm ERROR V-5-1-3996File not in correct format
Hit RETURN to continue.Apr 20 16:12:27 MEDB1 picld: Device PS0 AC UNAVAILABLE
Volume Manager Device Operations
Menu: VolumeManager/Disk/ExcludeDevices
1      Suppress all paths through a controller from VxVM's view
2      Suppress a path from VxVM's view
3      Suppress disks from VxVM's view by specifying a VID:PID combination
4      Suppress all but one paths to a disk
5      Prevent multipathing of all disks on a controller by VxVM
6      Prevent multipathing of a disk by VxVM
7      Prevent multipathing of disks by specifying a VID:PID combination
8      List currently suppressed/non-multipathed devices
?      Display help about menu
??   Display help about the menuing system
q      Exit from menus
Select an operation to perform: 8
Devices hidden from VxVM / not multipathed by vxdmp
Menu: VolumeManager/Disk/ExcludeDevices/listexclude
VxVMINFO V-5-2-1215
The following is the list of devices currently hidden from VxVM or not
multipathed by vxdmp:
VxVM vxdmpadm ERROR V-5-1-3996File not in correct format
Hit RETURN to continue.

Volume Manager Device Operations
Menu: VolumeManager/Disk/ExcludeDevices
1      Suppress all paths through a controller from VxVM's view
2      Suppress a path from VxVM's view
3      Suppress disks from VxVM's view by specifying a VID:PID combination
4      Suppress all but one paths to a disk
5      Prevent multipathing of all disks on a controller by VxVM
6      Prevent multipathing of a disk by VxVM
7      Prevent multipathing of disks by specifying a VID:PID combination
8      List currently suppressed/non-multipathed devices
?      Display help about menu
??   Display help about the menuing system
q      Exit from menus
Select an operation to perform: q

Volume Manager Support Operations
Menu: VolumeManager/Disk
1      Add or initialize one or more disks
2      Encapsulate one or more disks
3      Remove a disk
4      Remove a disk for replacement
5      Replace a failed or removed disk
6      Mirror volumes on a disk
7      Move volumes from a disk
8      Enable access to (import) a disk group
9      Remove access to (deport) a disk group
10   Enable (online) a disk device
11   Disable (offline) a disk device
12   Mark a disk as a spare for a disk group
13   Turn off the spare flag on a disk
14   Unrelocate subdisks back to a disk
15   Exclude a disk from hot-relocation use
16   Make a disk available for hot-relocation use
17   Prevent multipathing/Suppress devices from VxVM's view
18   Allow multipathing/Unsuppress devices from VxVM's view
19   List currently suppressed/non-multipathed devices
20   Change the disk naming scheme
21   Get the newly connected/zoned disks in VxVM view
22   Change/Display the default disk layouts
23   Mark a disk as allocator-reserved for a disk group
24   Turn off the allocator-reserved flag on a disk
list   List disk information
?      Display help about menu
??   Display help about the menuing system
q      Exit from menus
Select an operation to perform: q
VxVM vxdiskadm NOTICE V-5-2-1187 Please wait while the device suppression/unsuppression operations take effect.
Goodbye.
root@MEB1
#
root@MEB1
#
root@MEB1
# ls
alloc                isis               vold_request
apmkey.d             jbod.info            vras
array.info         lib                  vss
aslkey.d             licenses             vss57
bin                  log                  vvr
cbr                  reconfig.d         vvrports
ddl.support          slib               vvrports.template
diag.d               type               vxadm
disk.info            upgrade.d            vxdmp.exclude
disk.info.old      voladm.d             vxesd
dmpevents.log      volboot            vxtunables.template
es_scripts         vold_diag            vxvm.exclude
exclude.tmp          vold_inquiry
root@MEB1
# rm vxvm.exclude
root@MEB1
# rm vxdmp.exclude
root@MEB1
#
root@MEB1
#
root@MEDB1
#
root@MEDB1
# vxdiskadm
bash: vxdiskdm: command not found
root@MEDB1
# vxdiskdmkadm

Volume Manager Support Operations
Menu: VolumeManager/Disk
1      Add or initialize one or more disks
2      Encapsulate one or more disks
3      Remove a disk
4      Remove a disk for replacement
5      Replace a failed or removed disk
6      Mirror volumes on a disk
7      Move volumes from a disk
8      Enable access to (import) a disk group
9      Remove access to (deport) a disk group
10   Enable (online) a disk device
11   Disable (offline) a disk device
12   Mark a disk as a spare for a disk group
13   Turn off the spare flag on a disk
14   Unrelocate subdisks back to a disk
15   Exclude a disk from hot-relocation use
16   Make a disk available for hot-relocation use
17   Prevent multipathing/Suppress devices from VxVM's view
18   Allow multipathing/Unsuppress devices from VxVM's view
19   List currently suppressed/non-multipathed devices
20   Change the disk naming scheme
21   Get the newly connected/zoned disks in VxVM view
22   Change/Display the default disk layouts
23   Mark a disk as allocator-reserved for a disk group
24   Turn off the allocator-reserved flag on a disk
list   List disk information
?      Display help about menu
??   Display help about the menuing system
q      Exit from menus
Select an operation to perform: 17
Exclude Devices
Menu: VolumeManager/Disk/ExcludeDevices
VxVMINFO V-5-2-1239
This operation might lead to some devices being suppressed from VxVM's view
or prevent them from being multipathed by vxdmp (This operation can be
reversed using the vxdiskadm command).
Do you want to continue ? (default: y)

Volume Manager Device Operations
Menu: VolumeManager/Disk/ExcludeDevices
1      Suppress all paths through a controller from VxVM's view
2      Suppress a path from VxVM's view
3      Suppress disks from VxVM's view by specifying a VID:PID combination
4      Suppress all but one paths to a disk
5      Prevent multipathing of all disks on a controller by VxVM
6      Prevent multipathing of a disk by VxVM
7      Prevent multipathing of disks by specifying a VID:PID combination
8      List currently suppressed/non-multipathed devices
?      Display help about menu
??   Display help about the menuing system
q      Exit from menus
Select an operation to perform: 1

Exclude controllers from VxVM
Menu: VolumeManager/Disk/ExcludeDevices/CTLR-VXVM
Use this operation to exclude all paths through a controller from VxVM.
This operation can be reversed using the vxdiskadm command.
VxVMINFO V-5-2-1263
You can specify a controller name at the prompt. A controller name is of
the form c#, example c3, c11 etc. Enter 'all' to exclude all paths on all
the controllers on the host. To see the list of controllers on the system,
type 'list'.
Enter a controller name [,all,list,list-exclude,q,?] c2
VxVMINFO V-5-2-1306
All paths to the following enclosures through controller c2 will be hidden
from VxVM as a result of this operation :
   AMS_WMS1      AMS_WMS0      
Continue operation? (default: y)
Apr 20 16:12:46 MEDB1 last message repeated 2 times
Apr 20 16:13:12 MEDB1 vxdmp: NOTICE: VxVM vxdmp V-5-0-0 disabled controller /pci@8,600000/SUNW,qlc@1/fp@0,0 connected to disk array 77011034
Apr 20 16:13:12 MEDB1 vxdmp: NOTICE: VxVM vxdmp V-5-0-0 disabled controller /pci@8,600000/SUNW,qlc@1/fp@0,0 connected to disk array 77011077
VxVMNOTICE V-5-2-1323
The controller c2 will be disabled. The entries for paths on controller c2
will still be visible through VxVM utilities in a disabled state till a
reboot. After a reboot these entries will not be seen.
Hit RETURN to continue.Apr 20 16:13:12 MEDB1 picld: Device PS0 AC UNAVAILABLE
Do you wish to exclude more controllers ? (default: n) y

Exclude controllers from VxVM
Menu: VolumeManager/Disk/ExcludeDevices/CTLR-VXVM
Use this operation to exclude all paths through a controller from VxVM.
This operation can be reversed using the vxdiskadm command.
VxVMINFO V-5-2-1263
You can specify a controller name at the prompt. A controller name is of
the form c#, example c3, c11 etc. Enter 'all' to exclude all paths on all
the controllers on the host. To see the list of controllers on the system,
type 'list'.
Enter a controller name [,all,list,list-exclude,q,?] c3
VxVMINFO V-5-2-1306
All paths to the following enclosures through controller c3 will be hidden
from VxVM as a result of this operation :
   AMS_WMS1      AMS_WMS0      
Continue operation? (default: y)
Apr 20 16:13:24 MEDB1 vxdmp: NOTICE: VxVM vxdmp V-5-0-0 disabled controller /pci@8,600000/SUNW,qlc@2/fp@0,0 connected to disk array 77011034
Apr 20 16:13:24 MEDB1 vxdmp: NOTICE: VxVM vxdmp V-5-0-0 disabled controller /pci@8,600000/SUNW,qlc@2/fp@0,0 connected to disk array 77011077
VxVMNOTICE V-5-2-1323
The controller c3 will be disabled. The entries for paths on controller c3
will still be visible through VxVM utilities in a disabled state till a
reboot. After a reboot these entries will not be seen.
Hit RETURN to continue.
Do you wish to exclude more controllers ? (default: n) y

Exclude controllers from VxVM
Menu: VolumeManager/Disk/ExcludeDevices/CTLR-VXVM
Use this operation to exclude all paths through a controller from VxVM.
This operation can be reversed using the vxdiskadm command.
VxVMINFO V-5-2-1263
You can specify a controller name at the prompt. A controller name is of
the form c#, example c3, c11 etc. Enter 'all' to exclude all paths on all
the controllers on the host. To see the list of controllers on the system,
type 'list'.
Enter a controller name [,all,list,list-exclude,q,?] c5
VxVMINFO V-5-2-1306
All paths to the following enclosures through controller c5 will be hidden
from VxVM as a result of this operation :
   AMS_WMS1      AMS_WMS0      
Continue operation? (default: y)
Apr 20 16:13:35 MEDB1 vxdmp: NOTICE: VxVM vxdmp V-5-0-0 disabled controller /pseudo/dlmndrv@2 connected to disk array 77011034
Apr 20 16:13:35 MEDB1 vxdmp: NOTICE: VxVM vxdmp V-5-0-0 disabled controller /pseudo/dlmndrv@2 connected to disk array 77011077
VxVMNOTICE V-5-2-1323
The controller c5 will be disabled. The entries for paths on controller c5
will still be visible through VxVM utilities in a disabled state till a
reboot. After a reboot these entries will not be seen.
Hit RETURN to continue.
Do you wish to exclude more controllers ? (default: n)

Volume Manager Device Operations
Menu: VolumeManager/Disk/ExcludeDevices
1      Suppress all paths through a controller from VxVM's view
2      Suppress a path from VxVM's view
3      Suppress disks from VxVM's view by specifying a VID:PID combination
4      Suppress all but one paths to a disk
5      Prevent multipathing of all disks on a controller by VxVM
6      Prevent multipathing of a disk by VxVM
7      Prevent multipathing of disks by specifying a VID:PID combination
8      List currently suppressed/non-multipathed devices
?      Display help about menu
??   Display help about the menuing system
q      Exit from menus
Select an operation to perform: Apr 20 16:13:38 MEDB1 picld: Device PS0 AC UNAVAILABLE
8
Devices hidden from VxVM / not multipathed by vxdmp
Menu: VolumeManager/Disk/ExcludeDevices/listexclude
VxVMINFO V-5-2-1215
The following is the list of devices currently hidden from VxVM or not
multipathed by vxdmp:
Devices excluded from VxVM:
--------------------------
Paths : None
Controllers :   c2      c3      c5      
VID:PID : None
Devices excluded from multipathing by vxdmp:
-------------------------------------------
Paths : None
VID:PID : None
Pathgroups : None
----------
Hit RETURN to continue.
Volume Manager Device Operations
Menu: VolumeManager/Disk/ExcludeDevices
1      Suppress all paths through a controller from VxVM's view
2      Suppress a path from VxVM's view
3      Suppress disks from VxVM's view by specifying a VID:PID combination
4      Suppress all but one paths to a disk
5      Prevent multipathing of all disks on a controller by VxVM
6      Prevent multipathing of a disk by VxVM
7      Prevent multipathing of disks by specifying a VID:PID combination
8      List currently suppressed/non-multipathed devices
?      Display help about menu
??   Display help about the menuing system
q      Exit from menus
Select an operation to perform: q

Volume Manager Support Operations
Menu: VolumeManager/Disk
1      Add or initialize one or more disks
2      Encapsulate one or more disks
3      Remove a disk
4      Remove a disk for replacement
5      Replace a failed or removed disk
6      Mirror volumes on a disk
7      Move volumes from a disk
8      Enable access to (import) a disk group
9      Remove access to (deport) a disk group
10   Enable (online) a disk device
11   Disable (offline) a disk device
12   Mark a disk as a spare for a disk group
13   Turn off the spare flag on a disk
14   Unrelocate subdisks back to a disk
15   Exclude a disk from hot-relocation use
16   Make a disk available for hot-relocation use
17   Prevent multipathing/Suppress devices from VxVM's view
18   Allow multipathing/Unsuppress devices from VxVM's view
19   List currently suppressed/non-multipathed devices
20   Change the disk naming scheme
21   Get the newly connected/zoned disks in VxVM view
22   Change/Display the default disk layouts
23   Mark a disk as allocator-reserved for a disk group
24   Turn off the allocator-reserved flag on a disk
list   List disk information
?      Display help about menu
??   Display help about the menuing system
q      Exit from menus
Select an operation to perform: q
VxVM vxdiskadm NOTICE V-5-2-1187 Please wait while the device suppression/unsuppression operations take effect.
Goodbye.
root@MEDB1
#
root@MEDB1
#
root@MEDB1
#
root@MEDB1
# ls
alloc                jbod.info            vras
apmkey.d             lib                  vss
array.info         licenses             vss57
aslkey.d             log                  vvr
bin                  reconfig.d         vvrports
cbr                  slib               vvrports.template
ddl.support          type               vxadm
diag.d               upgrade.d            vxdmp.exclude
disk.info            voladm.d             vxesd
disk.info.old      volboot            vxtunables.template
dmpevents.log      vold_diag            vxvm.exclude
es_scripts         vold_inquiry
isis               vold_request
root@MEDB1
# TERM=vt100
root@MEDB1
# export TERM
root@MEDB1
# vi vxvm.exclude
[?1h="vxvm.exclude" 12 lines, 150 characters exclude_all 0
paths
#
controllers
c2 /pci@8,600000/SUNW,qlc@1/fp@0,0
c3 /pci@8,600000/SUNW,qlc@2/fp@0,0
c5 /pseudo/dlmndrv@2
#product
#pathgroups
#
~
~
~
~
~
~
~
~
~
~
~"vxvm.exclude" 12 lines, 150 characters

78M8
c2t50060E801002B1A1d3s2 /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e801002b1a1,3
78M8
c2t50060E801002B1A1d4s2 /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e801002b1a1,4
78M8c2t50060E801002B1A1d7s2 /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e801002b1a1,7
78M8c2t50060E801002B1A1d8s2 /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e801002b1a1,8
78M8c2t50060E801002B1A1d9s2 /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e801002b1a1,9
78M8c2t50060E801002B1A5d3s2 /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e801002b1a5,3
78M8c2t50060E801002B1A5d4s2 /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e801002b1a5,4
78M8c2t50060E801002B1A5d7s2 /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e801002b1a5,7
78M8c2t50060E801002B1A5d8s2 /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e801002b1a5,8
78M8c2t50060E801002B1A5d9s2 /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e801002b1a5,9
78M8c2t50060E801002B451d2s2 /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e801002b451,2
78M8c2t50060E801002B451d4s2 /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e801002b451,4
78M8c2t50060E801002B451d5s2 /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e801002b451,5
78M8c2t50060E801002B451d6s2 /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e801002b451,6
78M8c2t50060E801002B455d2s2 /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e801002b455,2
78M8c2t50060E801002B455d4s2 /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e801002b455,4
78M8
c2t50060E801002B455d5s2 /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e801002b455,5
78M8
c2t50060E801002B455d6s2 /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e801002b455,6
78M8
c3t50060E801002B1A0d3s2 /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w50060e801002b1a0,3
78M8
c3t50060E801002B1A0d4s2 /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w50060e801002b1a0,4
c3t50060E801002B1A0d7s2 /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w50060e801002b1a0,7
c3t50060E801002B1A0d8s2 /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w50060e801002b1a0,8
c3t50060E801002B1A0d9s2 /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w50060e801002b1a0,9
c3t50060E801002B1A4d3s2 /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w50060e801002b1a4,3
c3t50060E801002B1A4d4s2 /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w50060e801002b1a4,4
c3t50060E801002B1A4d7s2 /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w50060e801002b1a4,7
c3t50060E801002B1A4d8s2 /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w50060e801002b1a4,8
c3t50060E801002B1A4d9s2 /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w50060e801002b1a4,9
c3t50060E801002B450d2s2 /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w50060e801002b450,2
c3t50060E801002B450d4s2 /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w50060e801002b450,4
c3t50060E801002B450d5s2 /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w50060e801002b450,5
c3t50060E801002B450d6s2 /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w50060e801002b450,6
c3t50060E801002B454d2s2 /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w50060e801002b454,2
c3t50060E801002B454d4s2 /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w50060e801002b454,4
c3t50060E801002B454d5s2 /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w50060e801002b454,5
c3t50060E801002B454d6s2 /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w50060e801002b454,6
c4t50060E801002B1A5d3s2 /pseudo/dlmndrv@1/dlmfdrv@w50060e801002b1a5,3
c4t50060E801002B1A5d4s2 /pseudo/dlmndrv@1/dlmfdrv@w50060e801002b1a5,4
c4t50060E801002B1A5d7s2 /pseudo/dlmndrv@1/dlmfdrv@w50060e801002b1a5,7
c4t50060E801002B1A5d8s2 /pseudo/dlmndrv@1/dlmfdrv@w50060e801002b1a5,8
c4t50060E801002B1A5d9s2 /pseudo/dlmndrv@1/dlmfdrv@w50060e801002b1a5,9
c4t50060E801002B455d2s2 /pseudo/dlmndrv@1/dlmfdrv@w50060e801002b455,2
c4t50060E801002B455d4s2 /pseudo/dlmndrv@1/dlmfdrv@w50060e801002b455,4
c4t50060E801002B455d5s2 /pseudo/dlmndrv@1/dlmfdrv@w50060e801002b455,5
c4t50060E801002B455d6s2 /pseudo/dlmndrv@1/dlmfdrv@w50060e801002b455,6
c5t50060E801002B1A0d3s2 /pseudo/dlmndrv@2/dlmfdrv@w50060e801002b1a0,3
c5t50060E801002B1A0d4s2 /pseudo/dlmndrv@2/dlmfdrv@w50060e801002b1a0,4
c5t50060E801002B1A0d7s2 /pseudo/dlmndrv@2/dlmfdrv@w50060e801002b1a0,7
c5t50060E801002B1A0d8s2 /pseudo/dlmndrv@2/dlmfdrv@w50060e801002b1a0,8
c5t50060E801002B1A0d9s2 /pseudo/dlmndrv@2/dlmfdrv@w50060e801002b1a0,9
c5t50060E801002B1A4d3s2 /pseudo/dlmndrv@2/dlmfdrv@w50060e801002b1a4,3
c5t50060E801002B1A4d4s2 /pseudo/dlmndrv@2/dlmfdrv@w50060e801002b1a4,4
c5t50060E801002B1A4d7s2 /pseudo/dlmndrv@2/dlmfdrv@w50060e801002b1a4,7
c5t50060E801002B1A4d8s2 /pseudo/dlmndrv@2/dlmfdrv@w50060e801002b1a4,8
c5t50060E801002B1A4d9s2 /pseudo/dlmndrv@2/dlmfdrv@w50060e801002b1a4,9
c5t50060E801002B450d2s2 /pseudo/dlmndrv@2/dlmfdrv@w50060e801002b450,2
c5t50060E801002B450d4s2 /pseudo/dlmndrv@2/dlmfdrv@w50060e801002b450,4
c5t50060E801002B450d5s2 /pseudo/dlmndrv@2/dlmfdrv@w50060e801002b450,5
c5t50060E801002B450d6s2 /pseudo/dlmndrv@2/dlmfdrv@w50060e801002b450,6
c5t50060E801002B454d2s2 /pseudo/dlmndrv@2/dlmfdrv@w50060e801002b454,2
c5t50060E801002B454d4s2 /pseudo/dlmndrv@2/dlmfdrv@w50060e801002b454,4
c5t50060E801002B454d5s2 /pseudo/dlmndrv@2/dlmfdrv@w50060e801002b454,5
c5t50060E801002B454d6s2 /pseudo/dlmndrv@2/dlmfdrv@w50060e801002b454,6
:wq!
"vxvm.exclude" 75 lines, 4920 characters
[?1l>root@MEDB1 #
root@MEDB1
#
root@MEDB1
#
root@MEDB1
#
root@MEDB1
# ls
alloc                jbod.info            vras
apmkey.d             lib                  vss
array.info         licenses             vss57
aslkey.d             log                  vvr
bin                  reconfig.d         vvrports
cbr                  slib               vvrports.template
ddl.support          type               vxadm
diag.d               upgrade.d            vxdmp.exclude
disk.info            voladm.d             vxesd
disk.info.old      volboot            vxtunables.template
dmpevents.log      vold_diag            vxvm.exclude
es_scripts         vold_inquiry
isis               vold_request
root@MEDB1
# vxdctl enable
Apr 20 16:14:05 MEDB1 last message repeated 1 time
Apr 20 16:14:23 MEDB1 vxdmp: NOTICE: VxVM vxdmp V-5-0-112 disabled path 294/0x30 belonging to the dmpnode 285/0x30
Apr 20 16:14:23 MEDB1 vxdmp: NOTICE: VxVM vxdmp V-5-0-112 disabled path 294/0x70 belonging to the dmpnode 285/0x18
Apr 20 16:14:23 MEDB1 vxdmp: NOTICE: VxVM vxdmp V-5-0-112 disabled path 294/0x90 belonging to the dmpnode 285/0x20
Apr 20 16:14:23 MEDB1 vxdmp: NOTICE: VxVM vxdmp V-5-0-112 disabled path 294/0x50 belonging to the dmpnode 285/0x28
Apr 20 16:14:23 MEDB1 vxdmp: NOTICE: VxVM vxdmp V-5-0-112 disabled path 294/0x10 belonging to the dmpnode 285/0x10
Apr 20 16:14:23 MEDB1 vxdmp: NOTICE: VxVM vxdmp V-5-0-112 disabled path 294/0xb0 belonging to the dmpnode 285/0x48
Apr 20 16:14:23 MEDB1 vxdmp: NOTICE: VxVM vxdmp V-5-0-112 disabled path 294/0x110 belonging to the dmpnode 285/0x50
Apr 20 16:14:23 MEDB1 vxdmp: NOTICE: VxVM vxdmp V-5-0-112 disabled path 294/0xf0 belonging to the dmpnode 285/0x40
Apr 20 16:14:23 MEDB1 vxdmp: NOTICE: VxVM vxdmp V-5-0-112 disabled path 294/0xd0 belonging to the dmpnode 285/0x38
root@MEDB1
#
root@MEDB1
#
root@MEDB1
#
root@MEDB1
#
root@MEDB1
#
root@MEDB1
#
root@MEDB1
# sync'sync'
root@MEDB1
# Apr 20 16:14:31 MEDB1 picld: Device PS0 AC UNAVAILABLE
sync
root@MEDB1
# sync
root@MEDB1
#
root@MEDB1
# init 6
root@MEDB1
#
INIT: New run level: 6
The system is coming down.Please wait.
System services are now being stopped.
Stop HNTRLib2 monitor daemon
Apr 20 16:14:57 MEDB1 gab: GAB INFO V-15-1-20032 Port v closed
Apr 20 16:14:57 MEDB1 gab: GAB INFO V-15-1-20032 Port w closed
Apr 20 16:14:57 MEDB1 picld: Device PS0 AC UNAVAILABLE
Apr 20 16:14:59 MEDB1 gab: GAB INFO V-15-1-20032 Port h closed
Broken Pipe
Stopping vxfen..
Stopping vxfen.. Done
Apr 20 16:15:00 MEDB1 gab: GAB INFO V-15-1-20032 Port b closed


本文来自ChinaUnix博客，如果查看原文请点：http://blog.chinaunix.net/u/9710/showart_301426.html
页: [1]
查看完整版本: VXvm 配置controle