网络安装solaris10之后报错
如题，网络安装完之后报错，步骤没有错。初步怀疑光盘映像文件有问题，给点意见Solaris 10 software installation partially failed
Solaris 10 packages partially installed
SUNWj5dev
SUNWccccr
SUNWgnome-panel-share
SUNWzfsu
SUNWgimpprint
SUNWpostgr-83-client
SUNWgnome-audio-root
SUNWxorg-client-docs
SUNWgnome-media-root
SUNWtsr
SUNWflexruntime
SUNWTiff-devel
SUNWperl584man
SUNWgnome-media-player
SUNWqlc
SUNWpsm-lpd
SUNWhos
SUNWfmd
SUNWautoef
SUNWgnome-perf-meter-share
SUNWgnome-common-devel-share
SUNWcasu
SUNWxwcsl
SUNWipplu
SUNWhxplt
SUNWhdicn
SUNWkfbcf
SUNWgnome-print-devel-share
SUNWgnome-media-devel-share
SUNWfirefoxl10n-zh-TW
Customizing system files
- Mount points table (/etc/vfstab)
- Unselected disk mount points (/var/sadm/system/data/vfstab.unselected)
- Network host addresses (/etc/hosts)
- Environment variables (/etc/default/init)
Cleaning devices
Customizing system devices
- Physical devices (/devices)
- Logical devices (/dev)
Installing boot information
- Installing boot blocks (c0t1d0s0)
- Installing boot blocks (/dev/rdsk/c0t1d0s0)
- Updating system firmware for automatic rebooting
Installation log location
- /a/var/sadm/system/logs/install_log (before reboot)
- /var/sadm/system/logs/install_log (after reboot)
Installation complete
Executing SolStart postinstall phase...
Executing finish script "patch_finish"...
Finish script patch_finish execution completed.
Executing JumpStart postinstall phase...
The begin script log 'begin.log'
is located in /var/sadm/system/logs after reboot.
The finish script log 'finish.log'
is located in /var/sadm/system/logs after reboot.
Launching installer. Please Wait...
Installing Additional Software
|-1%--------------25%-----------------50%-----------------75%--------------100%|
Pausing for 30 seconds at the "Summary" screen. The wizard will continue to
the next step unless you select "Pause". Enter 'p' to pause. Enter 'c' to
continue.
Pausing for 90 seconds at the "Reboot" screen. The wizard will continue to
the next step unless you select "Pause". Enter 'p' to pause. Enter 'c' to
continue. c
Creating boot_archive for /a
updating /a/platform/sun4u/boot_archive
syncing file systems... done
rebooting...
LOM event: +4h20m45s host reset
NOTICE: RSC-Initiated Reset
Probing system devices
ERROR: /pci@8,600000/<Unnamed>: Last Trap: Data Access Error
screen not found.
keyboard not found.
Keyboard not present.Using lom-console for input and output.
Probing system devices
ERROR: /pci@8,600000/<Unnamed>: Last Trap: Data Access Error
Sun Netra T4 (UltraSPARC-III+) , No Keyboard
Copyright 1998-2004 Sun Microsystems, Inc.All rights reserved.
OpenBoot 4.16.4, 2048 MB memory installed, Serial #1010905.
Ethernet address 0:3:ba:f:6c:d9, Host ID: 800f6cd9.
Rebooting with command: boot
Boot device: /pci@8,600000/SUNW,qlc@4/fp@0,0/disk@w500000e0111163d1,0:aFile and args:
SunOS Release 5.10 Version Generic_142909-17 64-bit
Copyright (c) 1983, 2010, Oracle and/or its affiliates. All rights reserved.
SUNW,qlc: no major number
Cannot load drivers for /pci@8,600000/SUNW,qlc@4/fp@0,0/disk@w500000e0111163d1,0:a
Can't load the root filesystem
Type'go' to resume
ok go
Cannot assemble drivers for root /pci@8,600000/SUNW,qlc@4/fp@0,0/disk@w500000e0111163d1,0:a
Cannot mount root on /pci@8,600000/SUNW,qlc@4/fp@0,0/disk@w500000e0111163d1,0:a fstype ufs
panic/thread=180e000: vfs_mountroot: cannot mount root
000000000180b950 genunix:vfs_mountroot+370 (1873c00, 189cc00, 0, 1284800, 1877800, 6)
%l0-3: 0000030000072248 000000000186b3f8 000000000112fc00 00000000018cfc00
%l4-7: 0000000000000600 0000000000000200 0000000000000800 0000000000000200
000000000180ba10 genunix:main+ec (18155d0, 0, 18387c0, 10a1800, 0, 1)
%l0-3: 000000000180c000 000000000180c000 0000000070002000 0000000000000000
%l4-7: 000000000183d800 0000000000000000 000000000180c000 0000000000000001
skipping system dump - no dump device configured
rebooting... 重新安装oracle官网的solaris 10 U10 问题解决
页:
[1]