vmware下solaris cluster 3.3安装配置问题
本帖最后由 wallsen 于 2012-12-03 00:56 编辑自己搭个环境vmware workstation 6.5.2+solaris 5.10 u10+cluster 3.3 4/11
现在scinstall 配置网络这块为什么过不去，如下：
>>> Cluster Transport Adapters and Cables <<<
Transport adapters are the adapters that attach to the private cluster
interconnect.
What is the name of the first cluster transport adapter?e1000g1
Adapter "e1000g1" is already in use as a public network adapter.
What is the name of the first cluster transport adapter?e1000g0
Adapter "e1000g0" is already in use as a public network adapter.
网络配置如下：
# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
e1000g0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 192.168.10.11 netmask ffffff00 broadcast 192.168.10.255
ether 0:c:29:55:c1:16
e1000g1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
inet 192.168.0.11 netmask ffffff00 broadcast 192.168.0.255
ether 0:c:29:55:c1:20
# cat /etc/hosts
#
# Internet host table
#
::1 localhost
127.0.0.1 localhost
192.168.10.11 sol1 loghost
192.168.0.11 sol1-test
192.168.10.12 sol2
192.168.0.12 sol2-test
虚拟的是2块host-only方式的网卡，可能什么原因？？？ 这里是让输入的心跳网卡吧....
页:
[1]