鑫杰 发表于 2013-04-10 09:16

当然可以外置光驱，但其实最好的 就是用WEB ILOM 装，不求任何光驱

东方蜘蛛 发表于 2013-04-11 01:36

学习:em03::em03::em03:

tomer 发表于 2013-04-11 08:47

回复 11# 鑫杰


   求详细操作步骤，谢谢

rf00147 发表于 2013-04-11 20:16

本帖最后由 rf00147 于 2013-04-11 20:26 编辑

You need to boot your T4-1 or T4-4 SPARC system from your ISO boot and install image you have on your PC. The following steps allow you to accomplish this. This is known as an ILOM remote CD-ROM redirection. Here you mount an ISO image from your local PC hardrive as a virtual DVD available as a boot image on your T4 system. Pretty slick really. To implement the ILOM remote CDROM or DVD redirection you need to initiate a web browser session with your systems ILOM and launch the console. Below are the required steps.
1.Using a browser, connect to your servers ILOM ie. https://1.2.3.4 and login
2.Launch the console
3.click on Devices
4.click on CD-ROM images
5.file manager appears, map the ISO location to the image
6.start /HOST/console
7.obp devalias will show you a boot ISO alias called vcdrom
8.boot vcdrom

rf00147 发表于 2013-04-11 20:17

本帖最后由 rf00147 于 2013-04-11 20:28 编辑

You need to boot your T4-1 or T4-4 SPARC system from your ISO boot and install image you have on your PC. The following steps allow you to accomplish this. This is known as an ILOM remote CD-ROM redirection. Here you mount an ISO image from your local PC hardrive as a virtual DVD available as a boot image on your T4 system. Pretty slick really. To implement the ILOM remote CDROM or DVD redirection you need to initiate a web browser session with your systems ILOM and launch the console. Below are the required steps.
1.Using a browser, connect to your servers ILOM ie. https://1.2.3.4 and login
2.Launch the console
3.click on Devices
4.click on CD-ROM images
5.file manager appears, map the ISO location to the image
6.start /HOST/console
7.obp devalias will show you a boot ISO alias called vcdrom
8.boot vcdrom
？回复 13# tomer


   

rf00147 发表于 2013-04-11 20:25

You need to boot your T4-1 or T4-4 SPARC system from your ISO boot and install image you have on your PC. The following steps allow you to accomplish this. This is known as an ILOM remote CD-ROM redirection. Here you mount an ISO image from your local PC hardrive as a virtual DVD available as a boot image on your T4 system. Pretty slick really. To implement the ILOM remote CDROM or DVD redirection you need to initiate a web browser session with your systems ILOM and launch the console. Below are the required steps.
1.Using a browser, connect to your servers ILOM ie. https://1.2.3.4 and login
2.Launch the console
3.click on Devices
4.click on CD-ROM images
5.file manager appears, map the ISO location to the image
6.start /HOST/console
7.obp devalias will show you a boot ISO alias called vcdrom
8.boot vcdrom

rf00147 发表于 2013-04-11 20:27

You need to boot your T4-1 or T4-4 SPARC system from your ISO boot and install image you have on your PC. The following steps allow you to accomplish this. This is known as an ILOM remote CD-ROM redirection. Here you mount an ISO image from your local PC hardrive as a virtual DVD available as a boot image on your T4 system. Pretty slick really. To implement the ILOM remote CDROM or DVD redirection you need to initiate a web browser session with your systems ILOM and launch the console. Below are the required steps.
1.Using a browser, connect to your servers ILOM ie. https://1.2.3.4 and login
2.Launch the console
3.click on Devices
4.click on CD-ROM images
5.file manager appears, map the ISO location to the image
6.start /HOST/console
7.obp devalias will show you a boot ISO alias called vcdrom
8.boot vcdrom


   

znnnz 发表于 2013-04-12 12:44

LS经典               

鑫杰 发表于 2013-04-12 13:19

note:必须英文路径的ISO

San风夕 发表于 2013-04-13 21:01

来看看,学习学习,
页: 1 [2]
查看完整版本: 如何使用光驱启动