还有操作系统的版本要求，自己看手册吧，如果没错的话，应该要求最小是 S10U8 问题到了这个程度就没事先咨询厂家吗？ 2.66的板子要求的XSCF版本和solaris的版本都有的，
handbook上面写得很明白的。。 估计是HUAWEI吧 回复 13# 狂日一条
XSCF已经升到最近1113了，系统版本也已达到要求了
uname -a
SunOS xxxxxxxx 5.10 Generic_142900-03 sun4u sparc SUNW,SPARC-Enterprise
xxxxxxx> more /etc/release
Solaris 10 10/09 s10s_u8wos_08a SPARC
Copyright 2009 Sun Microsystems, Inc.All Rights Reserved.
Use is subject to license terms.
Assembled 16 September 2009
xxxxxxxx>
XSCF> version -c xcp -v
XSCF#0 (Active )
XCP0 (Reserve): 1113
OpenBoot PROM : 02.29.0000
XSCF : 01.11.0003
XCP1 (Current): 1113
OpenBoot PROM : 02.29.0000
XSCF : 01.11.0003
OpenBoot PROM BACKUP
#0: 02.29.0000
#1: 02.08.0000
现在就是不知道2.66GHz的CPU是不是要最新的主板才支持
Newbie
1 points
JorisJune 27, 2011 8:10 AM
Requirements for 2,66GHz cpu's in Mx000
All,
Can somebody tell me what the requirements are to upgrade a Mx000 from 2,4GHz to 2,66GHz
I know 1100 firmware and solaris 10_u8 with certain patches is required. But does customer need to upgrade the system-board?
Are 2,4GHz and 2,66GHz CMU's mixed in one domain supported as well?
In mine opinion a system-board 511-1600 is required.....
Kind regards
Joris
Tags: Refresh Tags|Add Tags|Delete Tags
Reply| Subscribe|Report abuse
no rating 0 0
Expert
1014 points
Rene Fennet - Oracle1. June 28, 2011 1:32 PMin response to: Joris
Re: Requirements for 2,66GHz cpu's in Mx000
Hi Joris,
First, let me point you to two informative documents.
At the top of the M-series community, you will find a link to the "XCP 1101 Product Notes".
Then in My Oracle Support we have the "SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Server Matrix for Hardware, Firmware and Software (Doc ID 1145383.1)".
Now to get to your questions. As you rightly mentioned, SPARC64 VII+ @2.66GHz CPU modules need XCP 1100 or later, we advise to always run the most recent version , which today is XCP1101 . Your domain needs Solaris 10 10/09 Update 8, plus the Recommended OS Patch Cluster .
Information on upgrading CPU modules can be found in the "SPARC Enterprise M4000/M5000/M8000/M9000 Servers CPU Upgrade Guide" . This document will tell you if there are any limitation or requirement when upgrading hardware.
It is important to get the terminology right, that way it is easier to match discussion like this to output of XSCF commands. Since you reference a M4000 part, I assume you are inquiring about the M4000 and M5000 machines. As such a CMU (CPU Memory Unit) only applies to the M8000 and M9000 series. On M4000 and M5000 the CPU modules plug directly into a board that is referred to as the motherboard. To upgrade these machines to SPARC64 VII+ @2.66GHz CPU Modules there is no need to upgrade the motherboard on existing servers.
The only thing you need to keep in mind is, that on the original motherboards, the new SPARC64 VII+ @2.66GHz CPU Modules will only use half (5.5MB) of the the L2 Cache. If the customer wishes to immediately use the full 11MB of L2 Cache, he also needs to by the new motherboard you referenced in your question.
Please let me know if this answers your question.
Kind regards,
Rene Fennet
改天申请原厂service password再去折腾:dizzy: 整得咋样了？！
lz，结果如何？
前天再次扩容，上来通报扩容情况。申请service password清除告警后下电扩容成功. 这种情况我也碰到过，升级FW就可以支持混插的，操作系统版本不升级也没有问题的，官方说是需要升级操作系统，实际上，不升级操作系统也没有问题。
页:
1
[2]