ddd3ww 发表于 2014-10-01 10:28

IBM DS3200报错，各位大神看看如何解决!!!

本帖最后由 ddd3ww 于 2014-10-01 10:29 编辑

小弟不太懂存储，遇到一台客户的DS3200（单控的） 报错，报警灯一直在闪，不知是何原因，我把错误信息考了一份


Battery Expired
Storage Subsystem:Unnamed
Component reporting problem:Battery
Status:Battery expired
Location:Controller enclosure 85, Controller in Slot A
Smart battery:Yes
Component requiring service:Controller A
Service action (removal) allowed:No
    Service action LED on component:No

What Caused the Problem?
A battery has reached the end of its useful life. The Recovery Guru Details area provides specific information you will need as you follow the recovery steps.

Caution: Electrostatic charges can damage sensitive components. Always use proper antistatic protection when handling components. Touching components without using a proper ground may damage the equipment.

I

rickcafe 发表于 2014-10-01 12:54

A控电池过期啊，换电池啊

paomian115 发表于 2017-10-30 17:01

可以先把电池重置一下。不行再更换电池。

ouyixq 发表于 2017-11-24 10:31

冷风呼呼吹，我把祝福来送上：天寒地冻易受凉，多穿衣服要保暖;早出晚归温差大，增添衣服要恰当;早睡早起身体好，万事如意齐家欢。
这里是广州欧毅建材《智能调光玻璃》

snakekill 发表于 2018-02-22 13:54

DS3200 用的电池是锂离子电芯的，直接拆下来重新买三个焊在一起就好，我就是这么干的，否则花几千块钱买个模块，有意义么？
页: [1]
查看完整版本: IBM DS3200报错，各位大神看看如何解决!!!