- 论坛徽章:
- 0
|
在scsi硬盘上的RHEL 4AS 安装问题
1、首先确认在BIOS能SCSI引导。
2、在SCSI的BIOS看到SCSI盘后,引导成功。
3、先用SCSI9启动,修改/etc/grub.conf文件后重新启动(重启时所有设备都挂上),修改grub.conf如下:
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You do not have a /boot partition. This means that
# all kernel and initrd paths are relative to /, eg.
# root (hd0,0)
# kernel /boot/vmlinuz-version ro root=/dev/sda1
# initrd /boot/initrd-version.img
#boot=/dev/sda
boot=/dev/sdb
# 上面为修改行,由sdb引导。
default=0
timeout=10
splashimage=(hd0,0)/boot/grub/splash.xpm.gz
title Red Hat Enterprise Linux AS (2.4.21-27.EL)
root (hd0,0)
kernel /boot/vmlinuz-2.4.21-27.EL ro root=LABEL=/ /
initrd /boot/initrd-2.4.21-27.EL.img |
|