免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
12下一页
最近访问板块 发新帖
查看: 3222 | 回复: 18
打印 上一主题 下一主题

用了ZFS后。。。。已解决 [复制链接]

论坛徽章:
0
跳转到指定楼层
1 [收藏(0)] [报告]
发表于 2009-05-11 23:10 |只看该作者 |正序浏览
在一台机器上的一个新硬盘使用了ZFS,然后format中看到
Current partition table (original):
Total disk sectors available: 71116541 + 16384 (reserved sectors)

Part      Tag    Flag     First Sector        Size        Last Sector
  0        usr    wm               256      33.91GB         71116541
  1 unassigned    wm                 0          0              0
  2 unassigned    wm                 0          0              0
  3 unassigned    wm                 0          0              0
  4 unassigned    wm                 0          0              0
  5 unassigned    wm                 0          0              0
  6 unassigned    wm                 0          0              0
  8   reserved    wm          71116542       8.00MB         71132925

part7不见了,不知道怎样才能恢复以前那样,就是part0~7那样的,请教高手,谢谢!

[ 本帖最后由 terryhux 于 2009-5-12 11:30 编辑 ]

论坛徽章:
0
19 [报告]
发表于 2009-05-12 16:40 |只看该作者
学习。。。。。。。。。

论坛徽章:
0
18 [报告]
发表于 2009-05-12 11:37 |只看该作者
format -e一下  几OK

论坛徽章:
0
17 [报告]
发表于 2009-05-12 11:26 |只看该作者
原帖由 sunshiene 于 2009-5-12 11:11 发表
楼主应该已经搞好了吧

谢谢,刚刚才弄好,开始的时候不知道是用lab,被我用format,然后又被我强制中断,最后重启系统format后总算是好了

论坛徽章:
0
16 [报告]
发表于 2009-05-12 11:11 |只看该作者
楼主应该已经搞好了吧

论坛徽章:
0
15 [报告]
发表于 2009-05-12 10:27 |只看该作者
选盘,然后label

论坛徽章:
0
14 [报告]
发表于 2009-05-12 10:15 |只看该作者
原帖由 killer911 于 2009-5-12 09:47 发表
format -e 恢复成SMI格式的label

format -e后
FORMAT MENU:
        disk       - select a disk
        type       - select (define) a disk type
        partition  - select (define) a partition table
        current    - describe the current disk
        format     - format and analyze the disk
        repair     - repair a defective sector
        label      - write label to the disk
        analyze    - surface analysis
        defect     - defect list management
        backup     - search for backup labels
        verify     - read and display labels
        inquiry    - show vendor, product and revision
        scsi       - independent SCSI mode selects
        cache      - enable, disable or query SCSI disk cache
        volname    - set 8-character volume name
        !<cmd>     - execute <cmd>, then return
        quit
多了几个选项,请问怎么恢复成SMI格式的label?

论坛徽章:
0
13 [报告]
发表于 2009-05-12 09:47 |只看该作者
format -e 恢复成SMI格式的label

论坛徽章:
0
12 [报告]
发表于 2009-05-12 09:46 |只看该作者
format -e ,选择smi标号。

论坛徽章:
0
11 [报告]
发表于 2009-05-12 09:43 |只看该作者
求解啊。。。。。。。。。。。。。。。。。。。。。
  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP