- 论坛徽章:
- 1
|
作者:scotw 出处:tw.sco.com
SCO OpenServer 6 provides two editions to customers, including Enterprise Edition and Starter Edition. For the basic hardware requirement for OSR6, please check the following below :
Hardware Requirement for SCO OpenServer 6 Installation:
Hardware
Minimum Requirement
Suggested
Maximum Supported Hardware
Processor
IntelR Celeron(R), Pentium(R), Pentium II, Pentium III, Pentium III Xeon, Pentium 4, or Intel Xeon, or Intel-compatible processors, e.g. AMD Athlon(TM), Athlon 64, Duron(TM), Sempron(TM), or Opteron(TM)
Pentium P4
32 CPUs
Memory
64MB, 128MB(Xwindow)
256MB
64GB
Disk Space
4GB
8GB
1TB(per disk)
HBA
IDE
SCSI, SATA
1024
SCO OpenServer 6 Edition:
Starter Edition
Enterprise Edition
Users
2
10
Memory
1GB
4GB
Processor Number
1
4
OS Installation Steps
Please boot the system with OSR6 CD, just press ENTER after seeing Boot prompt.
System will show the license, please press ENTER.
System tells the function keys definition during OS installation, please press ENTER.
Accept or Decline the OS license agreement, please choose "Accept".
System asks if other HBA driver is necessary? Please choose according to the situation.
System shows the loaded HBA drivers, please press ENTER.
To choose the installation methods, please choose "Installation from CD-ROM"
To choose the keyboard mapping, please use the default configuration.
To Input License Information
System Configuration. Customer should set system name, domain name, and Time Zone. Other configurations are depending on customers' environment. After system name and domain name are configured, please enter Time Zone configuration.
For instance, you can choose Asia -> Taiwan Standard Time, if you are located in Taiwan. Then choose "Accept" and go back the previous screen.
Go back the system configuration screen, and choose "Accept" to continue.
Setup the hard drive, and choose the installation packages. Generally speaking, customers just need to setup the hard drive configuration.
After entering hard drive configuration, please do according to the situation.
Then setup the partition, if nothing special, please just accept the default configuration.
Setup the filesystem size, and allocation. Accept the default values unless special situation.
Hard drive option, please accept default value.
Go back to previous screen
Go back to previous screen
Configure network, Xwindow, Mouse..etc.
Configure the TCP/IP setup.
Go back to previous screen, mouse is detected automatically, and suggested to use Sendmail mail system.
Set the root password
Final installation confirmation. System can begin to install.
The regular OS installation on Pentium 4 system may need 50 minutes.
After OS is installed, please check :
http://www.sco.com/support/download.html
or
ftp.sco.com
for latest SCO OS fix, e.g. Maintenance Pack.
本文来自ChinaUnix博客,如果查看原文请点:http://blog.chinaunix.net/u/31/showart_509062.html |
|