- 论坛徽章:
- 7
|
http://www.geocities.com/~gregl/
Boot the system using the Solaris CD and Installation Boot Disk :
Insert the Solaris x86 CD in the drive
Boot with the installation diskette (or 1,000,000 Driver Update Boot diskettes)
Boot from CD :
Select the cdrom to boot when presented with the available devices
[] Disk : Target 0
[x] CD : Target 0
Press the "F2> key to continue.
Boot to Single user mode from CD :
When Freedom to select Interactive or Jumpstart installation type the following :
Select type of installation : Boot -s
Press the "enter> key to continue.
Note : You have approxiamately 30 seconds to make this decision before the system boots into interactive installation.
Mount the drive usage :
# mount /dev/dsk/cxdxsx /a # for IDE drives, replace x with value that reflects your drive
Or
# mount /dev/cxtxdxsx /a # for SCSI drives, replace x with value that reflects your drive
Set your terminal mode for editing :
# TERM=at386;export term
Edit the passwd file and correct the path to the shell account :
# vi /a/etc/passwd
Line looks like :
Root :0:1:Super-User:/:/sbin/ksh
When completed should look like :
Root :0:1:Super-User:/:/usr/bin/ksh
Exit vi and save the passwd file :
: wq!
Un-mount the partition and reboot system :
# cd /
# umount /a
# init 6 |
|