关于name service的疑问

maqeileen

之前的hyper ternimal终于搞定了，原因就是线坏了！还有就是那天网管来换线，居然把RJ45错连在net port上，我当时不在场
搞得我贼郁闷。。。。。还请大家都来帮助了一把。。。看来连不上基本都是硬件问题，要么线！要么就是端口弄错问题。

言归正传，现在要用这个sun fire v125 做个Websphere的jsp服务器，设置好sc后，进去console,设置的时候有个阶段叫：


1。Name Service Information.的设置！（图1）

请问我做网络的web服务该用哪个呢？

2。而且这个就算这里选了“None” ，到后面还是会让我去设置
Name Service的domain address（图2）

3。最高不懂的是写了个gateway的地址进去，
它就一直的运行仿佛死机，提示的是" Just a moment "（图3）



我不懂了，请大家帮我看看吧，我也再好好研究下。

照理说给这v125设置网络，有ip, submask, gateway, pri-dns, sec-dns就可以了阿。。。不解中


[ 本帖最后由 maqeileen 于 2008-2-12 17:26 编辑 ]

maqeileen

大家加油新年快乐

briangao

It is more a question for yourself. Are you using any name service or not? If you are not sure, choose NONE at the installation time. You can always add the name service configuration after the install. If you do chose a name service but the server is not available, it may hang your installation process becuase it will try to reach out for the service but the service is not responding.

maqeileen

原帖由 briangao 于 2008-2-12 23:44 发表
It is more a question for yourself. Are you using any name service or not? If you are not sure, choose NONE at the installation time. You can always add the name service configuration after the i ...

What I meaning wasnt the if or not, it is why I choose the *none* item, finally it is dispalyed as the *LDAP* item.
Last Night, I gotta try again. At last, I found that it is got a one row shift in the hyperterminal console windon, so as that, I must select all the item after one row!

我发现在超级终端下，有１行的偏移，就是说你要选的东西是下一行的，不是本行，最后被我搞定了。
估计是我设置的属性的问题吧。

风之幻想

看来还是用SecureCRT看来好一些.