506每隔两三天死机一次,高手看看

taonf500

这是近几天的日志,高手帮忙看看:附件为更详细的日志
Oct 28 09:26:23 scosysv                           SCO OpenServer(TM) Release 5
Oct 28 09:26:23 scosysv
Oct 28 09:26:23 scosysv                   (C) 1976-2000 The Santa Cruz Operation, Inc.
Oct 28 09:26:23 scosysv                   (C) 1980-1994 Microsoft Corporation
Oct 28 09:26:23 scosysv                               All rights reserved.
Oct 28 09:26:23 scosysv
Oct 28 09:26:23 scosysv                         For complete copyright credits,
Oct 28 09:26:23 scosysv                    enter "copyrights" at the command prompt.
Oct 28 09:26:23 scosysv
Oct 28 09:26:23 scosysv device    address        vec dma  comment
Oct 28 09:26:23 scosysv -------------------------------------------------------------------------------
Oct 28 09:26:23 scosysv %kernel   -                  -   -  rel=3.2v5.0.6 kid=2000-07-27
Oct 28 09:26:23 scosysv %cpu      -                  -   -  unit=1 family=15
Oct 28 09:26:23 scosysv %cpuid    -                  -   -  unit=1 vend=GenuineIntel tfms=0:15:4:1(0)
Oct 28 09:26:23 scosysv %fpu      -                 13   -  unit=1 type=80387-compatible
Oct 28 09:26:23 scosysv %pci      0x0CF8-0x0CFF          -   -  am=1 sc=0 buses=10
Oct 28 09:26:23 scosysv %PnP      -                  -   -  nodes=0
Oct 28 09:26:23 scosysv %clock    -                  -   -  type=TSC/2793000771Hz
Oct 28 09:26:23 scosysv %serial   0x03F8-0x03FF          4   -  unit=0 type=Standard nports=1 fifo=yes
Oct 28 09:26:23 scosysv %serial   0x02F8-0x02FF          3   -  unit=1 type=Standard nports=1 fifo=yes
Oct 28 09:26:23 scosysv %console  -                  -   -  unit=vga type=0 num=12 scoansi=1 scroll=50
Oct 28 09:26:23 scosysv %floppy   0x03F2-0x03F7          6   2  unit=0 type=135ds18
Oct 28 09:26:23 scosysv %adapter  0x01F0-0x01F7         14   -  type=IDE ctlr=primary   dvr=wd
Oct 28 09:26:23 scosysv NADAPTERS=1
Oct 28 09:26:23 scosysv NADAPTERS=1
Oct 28 09:26:23 scosysv %eeG0     0x3000-0x301F         10   -  type=PRO/1000 00:11:09:5b:9b:f8
Oct 28 09:26:23 scosysv %cd-rom   -                  -   -  type=IDE ctlr=pri cfg=mst dvr=Srom->wd
Oct 28 09:26:23 scosysv %disk     -                  -   -  type=S ha=0 id=0 lun=0 bus=0 ht=ad320
Oct 28 09:26:23 scosysv %Sdsk     -                  -   -  cyls=8941 hds=255 secs=63 fts=stdb
Oct 28 09:26:23 scosysv mem: total = 1047596k, kernel = 132100k, user = 915496k
Oct 28 09:26:23 scosysv swapdev = 1/41, swplo = 0, nswap = 1048576, swapmem = 524288k
Oct 28 09:26:23 scosysv Autoboot from rootdev = 1/42, pipedev = 1/42, dumpdev = 1/41
Oct 28 09:26:23 scosysv kernel: Hz = 100, i/o bufs = 104220k (high bufs = 103196k)
Oct 28 09:26:23 scosysv
Oct 28 09:26:24 scosysv ifor_pmd:         *Notice* Unregistered SCO software is installed on your computer.^M         Refer to SCO's on-line help for registration information.^M
Oct 28 09:26:25 scosysv syslogd: re-initialise
Oct 28 09:26:25 scosysv syslogd: restart
Oct 28 09:26:36 scosysv snmpd[332]: Agent started (pid 332)
Oct 28 09:33:57 scosysv syslogd: restart
Oct 28 09:33:57 scosysv                           SCO OpenServer(TM) Release 5
Oct 28 09:33:57 scosysv
Oct 28 09:33:57 scosysv                   (C) 1976-2000 The Santa Cruz Operation, Inc.
Oct 28 09:33:57 scosysv                   (C) 1980-1994 Microsoft Corporation
Oct 28 09:33:57 scosysv                               All rights reserved.
Oct 28 09:33:57 scosysv
Oct 28 09:33:57 scosysv                         For complete copyright credits,
Oct 28 09:33:57 scosysv                    enter "copyrights" at the command prompt.
Oct 28 09:33:57 scosysv
Oct 28 09:33:57 scosysv device    address        vec dma  comment
Oct 28 09:33:57 scosysv -------------------------------------------------------------------------------
Oct 28 09:33:57 scosysv %kernel   -                  -   -  rel=3.2v5.0.6 kid=2000-07-27
Oct 28 09:33:57 scosysv %cpu      -                  -   -  unit=1 family=15
Oct 28 09:33:57 scosysv %cpuid    -                  -   -  unit=1 vend=GenuineIntel tfms=0:15:4:1(0)
Oct 28 09:33:57 scosysv %fpu      -                 13   -  unit=1 type=80387-compatible
Oct 28 09:33:57 scosysv %pci      0x0CF8-0x0CFF          -   -  am=1 sc=0 buses=10
Oct 28 09:33:57 scosysv %PnP      -                  -   -  nodes=0
Oct 28 09:33:57 scosysv %clock    -                  -   -  type=TSC/2793000895Hz
Oct 28 09:33:57 scosysv %serial   0x03F8-0x03FF          4   -  unit=0 type=Standard nports=1 fifo=yes
Oct 28 09:33:57 scosysv %serial   0x02F8-0x02FF          3   -  unit=1 type=Standard nports=1 fifo=yes
Oct 28 09:33:57 scosysv %console  -                  -   -  unit=vga type=0 num=12 scoansi=1 scroll=50
Oct 28 09:33:57 scosysv %floppy   0x03F2-0x03F7          6   2  unit=0 type=135ds18
Oct 28 09:33:57 scosysv %adapter  0x01F0-0x01F7         14   -  type=IDE ctlr=primary   dvr=wd
Oct 28 09:33:57 scosysv NADAPTERS=1
Oct 28 09:33:57 scosysv NADAPTERS=1
Oct 28 09:33:57 scosysv %eeG0     0x3000-0x301F         10   -  type=PRO/1000 00:11:09:5b:9b:f8
Oct 28 09:33:57 scosysv %cd-rom   -                  -   -  type=IDE ctlr=pri cfg=mst dvr=Srom->wd
Oct 28 09:33:57 scosysv %disk     -                  -   -  type=S ha=0 id=0 lun=0 bus=0 ht=ad320
Oct 28 09:33:57 scosysv %Sdsk     -                  -   -  cyls=8941 hds=255 secs=63 fts=stdb
Oct 28 09:33:57 scosysv mem: total = 1047596k, kernel = 132100k, user = 915496k
Oct 28 09:33:57 scosysv swapdev = 1/41, swplo = 0, nswap = 1048576, swapmem = 524288k
Oct 28 09:33:57 scosysv Autoboot from rootdev = 1/42, pipedev = 1/42, dumpdev = 1/41
Oct 28 09:33:57 scosysv kernel: Hz = 100, i/o bufs = 104220k (high bufs = 103196k)
Oct 28 09:33:57 scosysv
Oct 28 09:33:57 scosysv ifor_pmd:         *Notice* Unregistered SCO software is installed on your computer.^M         Refer to SCO's on-line help for registration information.^M
Oct 28 09:33:58 scosysv syslogd: re-initialise
Oct 28 09:33:58 scosysv syslogd: restart
Oct 28 09:34:09 scosysv snmpd[328]: Agent started (pid 32
Oct 28 17:51:08 scosysv telnetd[969]: ttloop:  peer died: Unknown error
Oct 29 08:03:57 scosysv ifor_pmd:         *Notice* Unregistered SCO software is installed on your computer.^M         Refer to SCO's on-line help for registration information.^M
Oct 29 16:52:29 scosysv telnetd[1797]: ttloop:  read: Connection timed out
Oct 30 08:03:57 scosysv ifor_pmd:         *Notice* Unregistered SCO software is installed on your computer.^M         Refer to SCO's on-line help for registration information.^M
Oct 30 14:30:36 scosysv syslogd: restart
Oct 30 14:30:36 scosysv                           SCO OpenServer(TM) Release 5
Oct 30 14:30:36 scosysv
Oct 30 14:30:36 scosysv                   (C) 1976-2000 The Santa Cruz Operation, Inc.
Oct 30 14:30:36 scosysv                   (C) 1980-1994 Microsoft Corporation
Oct 30 14:30:36 scosysv                               All rights reserved.
Oct 30 14:30:36 scosysv
Oct 30 14:30:36 scosysv                         For complete copyright credits,
Oct 30 14:30:36 scosysv                    enter "copyrights" at the command prompt.
Oct 30 14:30:36 scosysv
Oct 30 14:30:36 scosysv device    address        vec dma  comment
Oct 30 14:30:36 scosysv -------------------------------------------------------------------------------
Oct 30 14:30:36 scosysv %kernel   -                  -   -  rel=3.2v5.0.6 kid=2000-07-27
Oct 30 14:30:36 scosysv %cpu      -                  -   -  unit=1 family=15
Oct 30 14:30:36 scosysv %cpuid    -                  -   -  unit=1 vend=GenuineIntel tfms=0:15:4:1(0)
Oct 30 14:30:36 scosysv %fpu      -                 13   -  unit=1 type=80387-compatible
Oct 30 14:30:36 scosysv %pci      0x0CF8-0x0CFF          -   -  am=1 sc=0 buses=10
Oct 30 14:30:36 scosysv %PnP      -                  -   -  nodes=0
Oct 30 14:30:36 scosysv %clock    -                  -   -  type=TSC/2793001991Hz
Oct 30 14:30:36 scosysv %serial   0x03F8-0x03FF          4   -  unit=0 type=Standard nports=1 fifo=yes
Oct 30 14:30:36 scosysv %serial   0x02F8-0x02FF          3   -  unit=1 type=Standard nports=1 fifo=yes
Oct 30 14:30:36 scosysv %console  -                  -   -  unit=vga type=0 num=12 scoansi=1 scroll=50
Oct 30 14:30:36 scosysv %floppy   0x03F2-0x03F7          6   2  unit=0 type=135ds18
Oct 30 14:30:36 scosysv %adapter  0x01F0-0x01F7         14   -  type=IDE ctlr=primary   dvr=wd
Oct 30 14:30:36 scosysv NADAPTERS=1
Oct 30 14:30:36 scosysv NADAPTERS=1
Oct 30 14:30:36 scosysv %eeG0     0x3000-0x301F         10   -  type=PRO/1000 00:11:09:5b:9b:f8
Oct 30 14:30:36 scosysv %cd-rom   -                  -   -  type=IDE ctlr=pri cfg=mst dvr=Srom->wd
Oct 30 14:30:36 scosysv %disk     -                  -   -  type=S ha=0 id=0 lun=0 bus=0 ht=ad320
Oct 30 14:30:36 scosysv %Sdsk     -                  -   -  cyls=8941 hds=255 secs=63 fts=stdb
Oct 30 14:30:36 scosysv mem: total = 1047596k, kernel = 132100k, user = 915496k
Oct 30 14:30:36 scosysv swapdev = 1/41, swplo = 0, nswap = 1048576, swapmem = 524288k
Oct 30 14:30:36 scosysv Autoboot from rootdev = 1/42, pipedev = 1/42, dumpdev = 1/41
Oct 30 14:30:36 scosysv kernel: Hz = 100, i/o bufs = 104220k (high bufs = 103196k)
Oct 30 14:30:36 scosysv
Oct 30 14:30:36 scosysv ifor_pmd:         *Notice* Unregistered SCO software is installed on your computer.^M         Refer to SCO's on-line help for registration information.^M
Oct 30 14:30:37 scosysv syslogd: re-initialise
Oct 30 14:30:37 scosysv syslogd: restart
Oct 30 14:30:49 scosysv snmpd[335]: Agent started (pid 335)
Oct 30 17:03:15 scosysv telnetd[1115]: ttloop:  peer died: Unknown error
Oct 30 17:10:03 scosysv telnetd[1154]: ttloop:  read: Connection reset by peer
Oct 30 23:02:19 scosysv NOTICE: eeG0: copper link is down. (slot33,port1)
Oct 31 08:00:37 scosysv ifor_pmd:         *Notice* Unregistered SCO software is installed on your computer.^M         Refer to SCO's on-line help for registration information.^M
Nov  1 08:00:37 scosysv ifor_pmd:         *Notice* Unregistered SCO software is installed on your computer.^M         Refer to SCO's on-line help for registration information.^M
Nov  2 08:00:37 scosysv ifor_pmd:         *Notice* Unregistered SCO software is installed on your computer.^M         Refer to SCO's on-line help for registration information.^M
Nov  3 08:00:37 scosysv ifor_pmd:         *Notice* Unregistered SCO software is installed on your computer.^M         Refer to SCO's on-line help for registration information.^M
Nov  4 08:00:37 scosysv ifor_pmd:         *Notice* Unregistered SCO software is installed on your computer.^M         Refer to SCO's on-line help for registration information.^M
Nov  5 08:00:38 scosysv ifor_pmd:         *Notice* Unregistered SCO software is installed on your computer.^M         Refer to SCO's on-line help for registration information.^M
Nov  6 08:00:38 scosysv ifor_pmd:         *Notice* Unregistered SCO software is installed on your computer.^M         Refer to SCO's on-line help for registration information.^M


CNL

Unregistered SCO software

操作系统未注册,如果是正版直接到SCO网站注册一下

taonf500

谢谢!!

yy94193542

原帖由 CNL 于 2006-11-7 16:00 发表

操作系统未注册,如果是正版直接到SCO网站注册一下

这个没关系吧，我的系统从来没到网站上注册过去，也没死过机阿

CNL

openserver从506版本开始注册与否就有很大的不同了,
之后的版本如果不注册,socket,进程等资源都会被内核自动加上不同的限制,
如果你的系统本来负载就轻, 算来算去就那么十几个通讯连接,
怎么用也不可能超过这些限制, 注册不注册当然就无所谓了

l_xq0914

SCO UNIX 5.0.6怎样注册啊,

zhyesno

原帖由 l_xq0914 于 2006-11-15 21:27 发表
SCO UNIX 5.0.6怎样注册啊,

论坛内有注册机。

taonf500

谢谢各位大侠，已经基本解决。

sylssgw

请问Registered 项　N/A与YES有什么区别

sdccf

N/A表示你安装系统的这个License不需要注册
YES表示已经注册