求助!网卡的问题。

ckylixj

联想启天2600,在Windows下看网卡是:Intel(R) PRO/100 VE NetWork Connection
UnixWare的版本为711,在UnixWare下安装随机所带的驱动总是安装不成功.

安装步骤:
# ls /tmp   
VOL.000.000           goldtax.SysInfo.html
dtdbcache_goldtax:0   snmpd.pid
# custom


        1. Add a Supported Product

Select a set to customize or enter q to quit: 1

        Please enter media type:

                1. Floppy
                2. Tape
                3. Disk Image
Select an option or enter q to quit: 3
Please enter disk image path (e.g.: /tmp/myimage) or q to quit:
and press <RETURN>;
/tmp/VOL.000.000

Installing custom data files ... Volume  inserted as volume 01
Do you wish to continue? (y,n)->;y
UX:tar: ERROR: Directory checksum error

Error: extraction of ./tmp/perms failed: try again? (y/n) y
UX:tar: ERROR: Directory checksum error

Error: extraction of ./tmp/perms failed: try again? (y/n)



驱动的readme:

These drivers are provided for convenience. They have been tested
with SCO OpenServer* version 5.0.5.  For any and all UNIX support
questions as well as updated drivers, please contact the OS vendor.


Instructions for Installing the eeE Driver for SCO OpenServer
=============================================================
     
1. Copy the eee.vol file to any directory, say /tmp,
   on the SCO system, renaming the file as VOL.000.000. Also, make
   the file read-only by using 'chmod'.

        For example,
                # cp eee.vol /tmp/VOL.000.000
                # chmod 444 /tmp/VOL.000.000
     
2. If there is an older version of the eeE driver on the system, you
   must first remove it. To do this, run 'netconfig'. Remove all
   instances of the "Intel ..." adapters. Exit netconfig
   without opting to relink the kernel.
     
3. Install the new driver using 'custom'. When asked for the
   installation media, choose 'media images', and type the directory
   path to the VOL.000.000 file. (In step 1, if you copied it to
   /tmp, type '/tmp'). After the installation of the driver is
   complete, exit 'custom'.
     
4. Run 'netconfig' and add the adapters. For each adapter that is
   present in the system, enter the appropriate TCP/IP parameters.
   By default, the driver automatically detects the line speed and
   duplex mode. If you want to force any of these settings, choose
   'Advanced Options' and set the speed and duplex modes. Exit
   'netconfig' and choose to relink the kernel.
     
5. Reboot the system.


Notes:
=======

- Some Intel gigabit ethernet devices may be recogized by this
  driver due to similar device IDs.  The eeG driver for SCO 5
  provided by Intel should be used for these devices as eeE does
  not support gigabit devices.  It is important to make sure the
  device selected in netconfig has the slot number corresponding
  to the device intended for installation.


* Third-party trademarks are the property of their respective owners.

sdccf

你用的驱动不对,当然不行了,你用的是For OpenServer 5的,不是UnixWare 7的.

ckylixj

那我从那里可以找到相应的驱动？
还有我安装UnixWare714，网卡就可以自动被识别出来。