- 论坛徽章:
- 1
|
BRODDCOM公司望卡芯片远程管理模块
在OSR系统中不支持,需要关闭
如果关闭,可参考下边的介绍
Disabling ASF in the firmware
==============================
This driver does not support ASF. If you find that the driver does
not load due to ASF being enabled in the firmware, use the following
procedure to disable it:
1. Download the BCM57xx User diagnostic from our driver
download site at :
http://www.broadcom.com/drivers/downloaddrivers.php
2. Create a DOS bootable floppy
3. Unpack the diag zip-file into this floppy
4. Boot to DOS using this floppy
5. Enter "b57udiag -cmd"
6. Enter setasf -d
7. Reboot the system= |
|