x86 Solaris10 jumpstart 安装问题

aman13

请交各位：
x86 Solaris 10 jumpstart 安装。
Install Server, tftp Server 是Solaris Sparc 9 server. DHCP server 在Windows Server 上。
一台Dell x86 为客户端。F12, PXE启动后，能看到GRUB menu,但回车后Dell x86 就会重启。估计是没有找到kernel.
如何解决这个问题，先谢谢了。

briangao

When you get the GRUB menu, type e to see where the system is looking for the kernel. Sounds like that your x86.miniroot has a problem.

aman13

hi briangao,
Thanks for your reply.
The system kernel is under the /tftproot/I86pc/multiboot/. How to check the x86.miniroot?
Thanks。

briangao

On your installation server, check /tftpboot directory and issue post the result of:
ls -l /tftpboot
ls -l I86pc/multiboot
df -k
cat menu.lst.<Clicent_MAC_address> such as menu.lst.010002...

[ 本帖最后由 briangao 于 2007-10-17 10:49 编辑 ]

aman13

the ls -l result is too long
I just can past menu content as below:
title Solaris_10 Jumpstart
        kernel /I86PC.Solaris_10-1/multiboot kernel/unix -B install_config=10.130.24.13:/usr2/jumpstart/preconf/client/cn42-nis-4,sysid_config=10.130.24.13:/usr2/jumpstart/preconf/client/cn42-nis-4/sysidcfg,install_media=10.130.24.13:/usr2/jumpstart/OS/sol_10_x86_1106,install_boot=10.130.24.13:/usr2/jumpstart/OS/sol_10_x86_1106/boot
        module /I86PC.Solaris_10-1/x86.miniroot

briangao

Try add the following keyword:

kernel /I86PC.Solaris_10-1/multiboot kernel/unix - install -B install_config=10.130.24.13:/usr2/jumpstart/preconf/client/cn42-nis-.....

Be careful, there is a space between - and install

aman13

Thanks briangao
It is the x86.miniroot problem. I copy it again. Now the jumpstart server is OK.
Thanks again.

yuhuohu

受益，收藏