免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
最近访问板块 发新帖
查看: 1839 | 回复: 5
打印 上一主题 下一主题

急!!帮忙分析双机环境下multipack磁盘问题. [复制链接]

论坛徽章:
0
跳转到指定楼层
1 [收藏(0)] [报告]
发表于 2007-11-22 18:01 |只看该作者 |倒序浏览
两台1405 solaris6+cluster2.x+vxvm+2台multipack环境下:
smcp01#dmesg    ------报如下信息:

Nov 22 15:49
cpu0: SUNW,UltraSPARC-II (upaid 1 impl 0x11 ver 0xa0 clock 440 MHz)
cpu1: SUNW,UltraSPARC-II (upaid 2 impl 0x11 ver 0xa0 clock 440 MHz)

SunOS Release 5.6 Version Generic_105181-30 [UNIX(R) System V Release 4.0]
Copyright (c) 1983-1997, Sun Microsystems, Inc.
WARNING: forceload of drv/scsi failed
mem = 1048576K (0x40000000)
avail mem = 1038843904
Ethernet address = 8:0:20:e8:b6:69
root nexus = Netra t 1400/1405 (2 X UltraSPARC-II 440MHz)
pci108e,80000 at root: UPA 0x1f 0x4000
pci108e,80000 is /pci@1f,4000
pci108e,80001 at root: UPA 0x1f 0x2000
pci108e,80001 is /pci@1f,2000
glm0:        Rev. 5 Symbios 53c875 found. PCI-device: scsi@3, glm #0
glm0 is /pci@1f,4000/scsi@3
glm1:        Rev. 5 Symbios 53c875 found. PCI-device: scsi@3,1, glm #1
glm1 is /pci@1f,4000/scsi@3,1
PCI-device: pci@2, pci_pci #0
pci1011,240 is /pci@1f,4000/pci@2
PCI-device: SUNW,isptwo@4, isp #0
SUNW,isptwo0 is /pci@1f,4000/pci@2/SUNW,isptwo@4
isp0:        Firmware Version: v4.66, Customer: 0, Product: 0
PCI-device: pci@4, pci_pci #1
pci1011,241 is /pci@1f,4000/pci@4
PCI-device: SUNW,isptwo@4, isp #1
SUNW,isptwo1 is /pci@1f,4000/pci@4/SUNW,isptwo@4
isp1:        Firmware Version: v4.66, Customer: 0, Product: 0
sd8 at SUNW,isptwo0: target 9 lun 0
sd8 is /pci@1f,4000/pci@2/SUNW,isptwo@4/sd@9,0
WARNING: /pci@1f,4000/pci@2/SUNW,isptwo@4 (isp0):          Target 9 reducing transfer rate
WARNING: /pci@1f,4000/pci@2/SUNW,isptwo@4 (isp0):         Parity Error
WARNING: /pci@1f,4000/pci@2/SUNW,isptwo@4 (isp0):          Target 9 reducing transfer rate
WARNING: /pci@1f,4000/pci@2/SUNW,isptwo@4 (isp0):         Parity Error
WARNING: /pci@1f,4000/pci@2/SUNW,isptwo@4 (isp0):          Target 9 disabled wide SCSI mode
        <SUN18G cyl 7506 alt 2 hd 19 sec 248>
sd9 at SUNW,isptwo0: target a lun 0
sd9 is /pci@1f,4000/pci@2/SUNW,isptwo@4/sd@a,0
WARNING: /pci@1f,4000/pci@2/SUNW,isptwo@4 (isp0):          Target 10 reducing transfer rate
WARNING: /pci@1f,4000/pci@2/SUNW,isptwo@4 (isp0):         Parity Error
WARNING: /pci@1f,4000/pci@2/SUNW,isptwo@4 (isp0):          Target 10 reducing transfer rate
WARNING: /pci@1f,4000/pci@2/SUNW,isptwo@4 (isp0):         Parity Error
WARNING: /pci@1f,4000/pci@2/SUNW,isptwo@4 (isp0):          Target 10 disabled wide SCSI mode
        <SUN18G cyl 7506 alt 2 hd 19 sec 248>
sd10 at SUNW,isptwo0: target b lun 0
sd10 is /pci@1f,4000/pci@2/SUNW,isptwo@4/sd@b,0
WARNING: /pci@1f,4000/pci@2/SUNW,isptwo@4 (isp0):          Target 11 reducing transfer rate
WARNING: /pci@1f,4000/pci@2/SUNW,isptwo@4 (isp0):         Parity Error
WARNING: /pci@1f,4000/pci@2/SUNW,isptwo@4 (isp0):          Target 11 reducing transfer rate
WARNING: /pci@1f,4000/pci@2/SUNW,isptwo@4 (isp0):         Parity Error
WARNING: /pci@1f,4000/pci@2/SUNW,isptwo@4 (isp0):          Target 11 disabled wide SCSI mode
        <SUN18G cyl 7506 alt 2 hd 19 sec 248>
sd12 at SUNW,isptwo0: target d lun 0
sd12 is /pci@1f,4000/pci@2/SUNW,isptwo@4/sd@d,0
WARNING: /pci@1f,4000/pci@2/SUNW,isptwo@4 (isp0):          Target 13 reducing transfer rate
WARNING: /pci@1f,4000/pci@2/SUNW,isptwo@4 (isp0):         Parity Error
WARNING: /pci@1f,4000/pci@2/SUNW,isptwo@4 (isp0):          Target 13 reducing transfer rate
WARNING: /pci@1f,4000/pci@2/SUNW,isptwo@4 (isp0):         Parity Error
WARNING: /pci@1f,4000/pci@2/SUNW,isptwo@4 (isp0):          Target 13 disabled wide SCSI mode
        <SUN18G cyl 7506 alt 2 hd 19 sec 248>
sd13 at SUNW,isptwo0: target e lun 0
sd13 is /pci@1f,4000/pci@2/SUNW,isptwo@4/sd@e,0
WARNING: /pci@1f,4000/pci@2/SUNW,isptwo@4 (isp0):          Target 14 reducing transfer rate
WARNING: /pci@1f,4000/pci@2/SUNW,isptwo@4 (isp0):         Parity Error
WARNING: /pci@1f,4000/pci@2/SUNW,isptwo@4 (isp0):          Target 14 reducing transfer rate
WARNING: /pci@1f,4000/pci@2/SUNW,isptwo@4 (isp0):         Parity Error
WARNING: /pci@1f,4000/pci@2/SUNW,isptwo@4 (isp0):          Target 14 disabled wide SCSI mode
        <SUN18G cyl 7506 alt 2 hd 19 sec 248>
sd23 at SUNW,isptwo1: target 9 lun 0
sd23 is /pci@1f,4000/pci@4/SUNW,isptwo@4/sd@9,0
        <SUN18G cyl 7506 alt 2 hd 19 sec 248>
sd24 at SUNW,isptwo1: target a lun 0
sd24 is /pci@1f,4000/pci@4/SUNW,isptwo@4/sd@a,0
        <SUN18G cyl 7506 alt 2 hd 19 sec 248>
sd25 at SUNW,isptwo1: target b lun 0
sd25 is /pci@1f,4000/pci@4/SUNW,isptwo@4/sd@b,0
        <SUN18G cyl 7506 alt 2 hd 19 sec 248>
sd26 at SUNW,isptwo1: target c lun 0
sd26 is /pci@1f,4000/pci@4/SUNW,isptwo@4/sd@c,0
        <SUN18G cyl 7506 alt 2 hd 19 sec 248>
sd27 at SUNW,isptwo1: target d lun 0
sd27 is /pci@1f,4000/pci@4/SUNW,isptwo@4/sd@d,0
        <SUN18G cyl 7506 alt 2 hd 19 sec 248>
sd28 at SUNW,isptwo1: target e lun 0
sd28 is /pci@1f,4000/pci@4/SUNW,isptwo@4/sd@e,0
        <SUN18G cyl 7506 alt 2 hd 19 sec 248>
sd30 at glm0: target 0 lun 0
sd30 is /pci@1f,4000/scsi@3/sd@0,0
        <SUN18G cyl 7506 alt 2 hd 19 sec 248>
sd31 at glm0: target 1 lun 0
sd31 is /pci@1f,4000/scsi@3/sd@1,0
        <SUN18G  cyl 7506 alt 2 hd 19 sec 248>
sd36 at glm0: target 6 lun 0
sd36 is /pci@1f,4000/scsi@3/sd@6,0
root on /pseudo/vxio@0:0 fstype ufs
WARNING: forceload of drv/scsi failed
WARNING: forceload of drv/ssd failed
WARNING: forceload of drv/sf failed
WARNING: forceload of drv/pln failed
WARNING: forceload of drv/soc failed
WARNING: forceload of drv/socal failed
PCI-device: ebus@1, ebus #0
su0 at ebus0: offset 14,3083f8
su0 is /pci@1f,4000/ebus@1/su@14,3083f8
su1 at ebus0: offset 14,3062f8
su1 is /pci@1f,4000/ebus@1/su@14,3062f8
keyboard is </pci@1f,4000/ebus@1/su@14,3083f8> major <37> minor <0>
mouse is </pci@1f,4000/ebus@1/su@14,3062f8> major <37> minor <1>
se0 at ebus0: offset 14,400000
se0 is /pci@1f,4000/ebus@1/se@14,400000
stdin is </pci@1f,4000/ebus@1/se@14,400000:a> major <20> minor <0>
stdout is </pci@1f,4000/ebus@1/se@14,400000:a> major <20> minor <0>
cpu 2 initialization complete - online
SUNW,hme0: CheerIO 2.0 (Rev Id = c1) Found
PCI-device: network@1,1, hme #0
SUNW,hme0 is /pci@1f,4000/network@1,1
SUNW,hme1: CheerIO 2.0 (Rev Id = c1) Found
SUNW,hme1: Local Ethernet address = 8:0:20:ed:66:f5
PCI-device: SUNW,hme@0,1, hme #1
SUNW,hme1 is /pci@1f,4000/pci@2/SUNW,hme@0,1
SUNW,hme2: CheerIO 2.0 (Rev Id = c1) Found
SUNW,hme2: Local Ethernet address = 8:0:20:ea:9b:59
PCI-device: SUNW,hme@0,1, hme #2
SUNW,hme2 is /pci@1f,4000/pci@4/SUNW,hme@0,1
SUNW,hme3: CheerIO 2.0 (Rev Id = c1) Found
SUNW,hme3: Local Ethernet address = 8:0:20:e3:95:8f
PCI-device: SUNW,hme@1,1, hme #3
SUNW,hme3 is /pci@1f,2000/SUNW,hme@1,1
SUNW,hme0: Using Internal Transceiver
SUNW,hme0: 100 Mbps full-duplex Link Up
dump on /dev/vx/dsk/swapvol size 2049680K
SUNW,lom0 at ebus0: offset 14,200000
SUNW,lom0 is /pci@1f,4000/ebus@1/SUNW,lom@14,200000

------问题是在node1里FORMAT,iostat -E,vxvm里面都看不到c1t12d0,,奇怪的是在NODE2里面又全看的到..
smcp01#format
Searching for disks...done


AVAILABLE DISK SELECTIONS:
       0. c0t0d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
          /pci@1f,4000/scsi@3/sd@0,0
       1. c0t1d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
          /pci@1f,4000/scsi@3/sd@1,0
       2. c1t9d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
          /pci@1f,4000/pci@2/SUNW,isptwo@4/sd@9,0
       3. c1t10d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
          /pci@1f,4000/pci@2/SUNW,isptwo@4/sd@a,0
       4. c1t11d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
          /pci@1f,4000/pci@2/SUNW,isptwo@4/sd@b,0
       5. c1t13d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
          /pci@1f,4000/pci@2/SUNW,isptwo@4/sd@d,0
       6. c1t14d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
          /pci@1f,4000/pci@2/SUNW,isptwo@4/sd@e,0
       7. c2t9d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
          /pci@1f,4000/pci@4/SUNW,isptwo@4/sd@9,0
       8. c2t10d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
          /pci@1f,4000/pci@4/SUNW,isptwo@4/sd@a,0
       9. c2t11d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
          /pci@1f,4000/pci@4/SUNW,isptwo@4/sd@b,0
      10. c2t12d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
          /pci@1f,4000/pci@4/SUNW,isptwo@4/sd@c,0
      11. c2t13d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
          /pci@1f,4000/pci@4/SUNW,isptwo@4/sd@d,0
      12. c2t14d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
          /pci@1f,4000/pci@4/SUNW,isptwo@4/sd@e,0

smcp01#vxdisk list
DEVICE       TYPE      DISK         GROUP        STATUS
c0t0d0s2     sliced    rootdisk     rootdg       online
c0t1d0s2     sliced    rootmirr     rootdg       online
c1t9d0s2     sliced    -            -            online
c1t10d0s2    sliced    -            -            online
c1t11d0s2    sliced    querydg01    querydg      online
c1t13d0s2    sliced    -            -            error
c1t14d0s2    sliced    -            -            error
c2t9d0s2     sliced    -            -            online
c2t10d0s2    sliced    -            -            online
c2t11d0s2    sliced    querydg03    querydg      online
c2t12d0s2    sliced    querydg04    querydg      online
c2t13d0s2    sliced    -            -            error
c2t14d0s2    sliced    -            -            error
-            -         querydg02    querydg      failed was:c1t12d0s2



我想应该不是磁盘的问题,在NODE2里面是一切正常的..
还有如果要更换硬盘,那怎么在系统里面辨别c1xxxxxx和c2xxxxxx在哪个multipack柜里面???

论坛徽章:
2
双鱼座
日期:2014-02-23 12:10:03操作系统版块每日发帖之星
日期:2015-12-17 06:20:00
2 [报告]
发表于 2007-11-22 18:13 |只看该作者
1.需要node2的信息;
2.node1已经报c1t12d0s2了,建议更换,换前确认该盘是否是仲裁盘;
3.确认multipack的位置的方法:format该磁盘或相邻的磁盘,用format菜单中的analyze做read测试。

good luck

论坛徽章:
2
双鱼座
日期:2014-02-23 12:10:03操作系统版块每日发帖之星
日期:2015-12-17 06:20:00
3 [报告]
发表于 2007-11-22 18:19 |只看该作者
又见smcp

论坛徽章:
0
4 [报告]
发表于 2007-11-22 18:44 |只看该作者
哈哈,,蜘蛛DX出来了,,
NOD2信息如下:
smcp02#dmesg

Nov 22 15:50
cpu0: SUNW,UltraSPARC-II (upaid 1 impl 0x11 ver 0xa0 clock 440 MHz)
cpu1: SUNW,UltraSPARC-II (upaid 2 impl 0x11 ver 0xa0 clock 440 MHz)

SunOS Release 5.6 Version Generic_105181-30 [UNIX(R) System V Release 4.0]
Copyright (c) 1983-1997, Sun Microsystems, Inc.
WARNING: forceload of drv/scsi failed
mem = 1048576K (0x40000000)
avail mem = 1038843904
Ethernet address = 8:0:20:e8:dd:dc
root nexus = Netra t 1400/1405 (2 X UltraSPARC-II 440MHz)
pci108e,80000 at root: UPA 0x1f 0x4000
pci108e,80000 is /pci@1f,4000
pci108e,80001 at root: UPA 0x1f 0x2000
pci108e,80001 is /pci@1f,2000
glm0:        Rev. 5 Symbios 53c875 found. PCI-device: scsi@3, glm #0
glm0 is /pci@1f,4000/scsi@3
glm1:        Rev. 5 Symbios 53c875 found. PCI-device: scsi@3,1, glm #1
glm1 is /pci@1f,4000/scsi@3,1
PCI-device: pci@2, pci_pci #0
pci1011,240 is /pci@1f,4000/pci@2
isp0:        initiator SCSI ID now 6
PCI-device: SUNW,isptwo@4, isp #0
SUNW,isptwo0 is /pci@1f,4000/pci@2/SUNW,isptwo@4
isp0:        Firmware Version: v4.66, Customer: 0, Product: 0
PCI-device: pci@4, pci_pci #1
pci1011,241 is /pci@1f,4000/pci@4
isp1:        initiator SCSI ID now 6
PCI-device: SUNW,isptwo@4, isp #1
SUNW,isptwo1 is /pci@1f,4000/pci@4/SUNW,isptwo@4
isp1:        Firmware Version: v4.66, Customer: 0, Product: 0
sd8 at SUNW,isptwo0: target 9 lun 0
sd8 is /pci@1f,4000/pci@2/SUNW,isptwo@4/sd@9,0
        <SUN18G cyl 7506 alt 2 hd 19 sec 248>
sd9 at SUNW,isptwo0: target a lun 0
sd9 is /pci@1f,4000/pci@2/SUNW,isptwo@4/sd@a,0
        <SUN18G cyl 7506 alt 2 hd 19 sec 248>
sd10 at SUNW,isptwo0: target b lun 0
sd10 is /pci@1f,4000/pci@2/SUNW,isptwo@4/sd@b,0
        <SUN18G cyl 7506 alt 2 hd 19 sec 248>
sd11 at SUNW,isptwo0: target c lun 0
sd11 is /pci@1f,4000/pci@2/SUNW,isptwo@4/sd@c,0
        <SUN18G cyl 7506 alt 2 hd 19 sec 248>
sd12 at SUNW,isptwo0: target d lun 0
sd12 is /pci@1f,4000/pci@2/SUNW,isptwo@4/sd@d,0
        <SUN18G cyl 7506 alt 2 hd 19 sec 248>
sd13 at SUNW,isptwo0: target e lun 0
sd13 is /pci@1f,4000/pci@2/SUNW,isptwo@4/sd@e,0
        <SUN18G cyl 7506 alt 2 hd 19 sec 248>
sd23 at SUNW,isptwo1: target 9 lun 0
sd23 is /pci@1f,4000/pci@4/SUNW,isptwo@4/sd@9,0
        <SUN18G cyl 7506 alt 2 hd 19 sec 248>
sd24 at SUNW,isptwo1: target a lun 0
sd24 is /pci@1f,4000/pci@4/SUNW,isptwo@4/sd@a,0
        <SUN18G cyl 7506 alt 2 hd 19 sec 248>
sd25 at SUNW,isptwo1: target b lun 0
sd25 is /pci@1f,4000/pci@4/SUNW,isptwo@4/sd@b,0
        <SUN18G cyl 7506 alt 2 hd 19 sec 248>
sd26 at SUNW,isptwo1: target c lun 0
sd26 is /pci@1f,4000/pci@4/SUNW,isptwo@4/sd@c,0
        <SUN18G cyl 7506 alt 2 hd 19 sec 248>
sd27 at SUNW,isptwo1: target d lun 0
sd27 is /pci@1f,4000/pci@4/SUNW,isptwo@4/sd@d,0
        <SUN18G cyl 7506 alt 2 hd 19 sec 248>
sd28 at SUNW,isptwo1: target e lun 0
sd28 is /pci@1f,4000/pci@4/SUNW,isptwo@4/sd@e,0
        <SUN18G cyl 7506 alt 2 hd 19 sec 248>
sd30 at glm0: target 0 lun 0
sd30 is /pci@1f,4000/scsi@3/sd@0,0
        <SUN18G cyl 7506 alt 2 hd 19 sec 248>
sd32 at glm0: target 2 lun 0
sd32 is /pci@1f,4000/scsi@3/sd@2,0
        <SUN18G cyl 7506 alt 2 hd 19 sec 248>
sd36 at glm0: target 6 lun 0
sd36 is /pci@1f,4000/scsi@3/sd@6,0
root on /pseudo/vxio@0:0 fstype ufs
WARNING: forceload of drv/scsi failed
WARNING: forceload of drv/ssd failed
WARNING: forceload of drv/sf failed
WARNING: forceload of drv/pln failed
WARNING: forceload of drv/soc failed
WARNING: forceload of drv/socal failed
PCI-device: ebus@1, ebus #0
su0 at ebus0: offset 14,3083f8
su0 is /pci@1f,4000/ebus@1/su@14,3083f8
su1 at ebus0: offset 14,3062f8
su1 is /pci@1f,4000/ebus@1/su@14,3062f8
keyboard is </pci@1f,4000/ebus@1/su@14,3083f8> major <37> minor <0>
mouse is </pci@1f,4000/ebus@1/su@14,3062f8> major <37> minor <1>
se0 at ebus0: offset 14,400000
se0 is /pci@1f,4000/ebus@1/se@14,400000
stdin is </pci@1f,4000/ebus@1/se@14,400000:a> major <20> minor <0>
stdout is </pci@1f,4000/ebus@1/se@14,400000:a> major <20> minor <0>
cpu 2 initialization complete - online
SUNW,hme0: CheerIO 2.0 (Rev Id = c1) Found
PCI-device: network@1,1, hme #0
SUNW,hme0 is /pci@1f,4000/network@1,1
SUNW,hme1: CheerIO 2.0 (Rev Id = c1) Found
SUNW,hme1: Local Ethernet address = 8:0:20:ed:6b:4
PCI-device: SUNW,hme@0,1, hme #1
SUNW,hme1 is /pci@1f,4000/pci@2/SUNW,hme@0,1
SUNW,hme2: CheerIO 2.0 (Rev Id = c1) Found
SUNW,hme2: Local Ethernet address = 8:0:20:ea:9a:f8
PCI-device: SUNW,hme@0,1, hme #2
SUNW,hme2 is /pci@1f,4000/pci@4/SUNW,hme@0,1
SUNW,hme3: CheerIO 2.0 (Rev Id = c1) Found
SUNW,hme3: Local Ethernet address = 8:0:20:ef:e7:85
PCI-device: SUNW,hme@1,1, hme #3
SUNW,hme3 is /pci@1f,2000/SUNW,hme@1,1
SUNW,hme0: Using Internal Transceiver
SUNW,hme0: 100 Mbps full-duplex Link Up
dump on /dev/dsk/c0t2d0s1 size 2049680K
SUNW,lom0 at ebus0: offset 14,200000
SUNW,lom0 is /pci@1f,4000/ebus@1/SUNW,lom@14,200000


smcp02#format
Searching for disks...done


AVAILABLE DISK SELECTIONS:
       0. c0t0d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
          /pci@1f,4000/scsi@3/sd@0,0
       1. c0t2d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
          /pci@1f,4000/scsi@3/sd@2,0
       2. c1t9d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
          /pci@1f,4000/pci@2/SUNW,isptwo@4/sd@9,0
       3. c1t10d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
          /pci@1f,4000/pci@2/SUNW,isptwo@4/sd@a,0
       4. c1t11d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
          /pci@1f,4000/pci@2/SUNW,isptwo@4/sd@b,0
       5. c1t12d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
          /pci@1f,4000/pci@2/SUNW,isptwo@4/sd@c,0
       6. c1t13d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
          /pci@1f,4000/pci@2/SUNW,isptwo@4/sd@d,0
       7. c1t14d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
          /pci@1f,4000/pci@2/SUNW,isptwo@4/sd@e,0
       8. c2t9d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
          /pci@1f,4000/pci@4/SUNW,isptwo@4/sd@9,0
       9. c2t10d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
          /pci@1f,4000/pci@4/SUNW,isptwo@4/sd@a,0
      10. c2t11d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
          /pci@1f,4000/pci@4/SUNW,isptwo@4/sd@b,0
      11. c2t12d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
          /pci@1f,4000/pci@4/SUNW,isptwo@4/sd@c,0
      12. c2t13d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
          /pci@1f,4000/pci@4/SUNW,isptwo@4/sd@d,0
      13. c2t14d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
          /pci@1f,4000/pci@4/SUNW,isptwo@4/sd@e,0

smcp02#vxdisk list
DEVICE       TYPE      DISK         GROUP        STATUS
c0t0d0s2     sliced    rootdisk     rootdg       online
c0t2d0s2     sliced    rootmirr     rootdg       online
c1t9d0s2     sliced    smcpdg01     smcpdg       online
c1t10d0s2    sliced    smcpdg02     smcpdg       online
c1t11d0s2    sliced    -            -            online
c1t12d0s2    sliced    -            -            online
c1t13d0s2    sliced    -            -            error
c1t14d0s2    sliced    -            -            error
c2t9d0s2     sliced    smcpdg03     smcpdg       online
c2t10d0s2    sliced    smcpdg04     smcpdg       online
c2t11d0s2    sliced    -            -            online
c2t12d0s2    sliced    -            -            online
c2t13d0s2    sliced    -            -            error
c2t14d0s2    sliced    -            -            error


可以看到NODE2里面是完全正常的..c1t12d0都正常识别.
还有你所说的READ测试就是看multipack前面版灯的闪烁来确定?
由于这边机柜设计缺陷,换盘必须把multipack卸下来,所以问题又来了,
down multipack的话可不可以不down双机的情况下把multipack卸下来,换好之后在插回去?或者还是要全部DOWN掉?

[ 本帖最后由 123yang123 于 2007-11-22 19:01 编辑 ]

论坛徽章:
0
5 [报告]
发表于 2007-11-22 21:58 |只看该作者
自己顶上去,我要答案,,,,,,

论坛徽章:
2
双鱼座
日期:2014-02-23 12:10:03操作系统版块每日发帖之星
日期:2015-12-17 06:20:00
6 [报告]
发表于 2007-11-22 23:17 |只看该作者
READ测试就是看multipack前面版灯的闪烁来确定;
建议停机换硬盘
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP