- 论坛徽章:
- 0
|
以下是编译前 /var/run/dmesg.boot的内容
- Copyright (c) 1992-2007 The FreeBSD Project.
- Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
- The Regents of the University of California. All rights reserved.
- FreeBSD is a registered trademark of The FreeBSD Foundation.
- FreeBSD 6.2-RELEASE #0: Fri Jan 12 08:43:30 UTC 2007
- [email=root@portnoy.cse.buffalo.edu]root@portnoy.cse.buffalo.edu[/email]:/usr/obj/usr/src/sys/SMP
- ACPI APIC Table: <INTEL S3000AH>
- Timecounter "i8254" frequency 1193182 Hz quality 0
- CPU: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz (2137.68-MHz K8-class CPU)
- Origin = "GenuineIntel" Id = 0x6fb Stepping = 11
- Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
- Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,<b9>,CX16,<b14>,<b15>>
- AMD Features=0x20100800<SYSCALL,NX,LM>
- AMD Features2=0x1<LAHF>
- Cores per package: 4
- real memory = 4831838208 (4608 MB)
- avail memory = 4127137792 (3935 MB)
- FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
- cpu0 (BSP): APIC ID: 0
- cpu1 (AP): APIC ID: 1
- cpu2 (AP): APIC ID: 2
- cpu3 (AP): APIC ID: 3
- ioapic0: Changing APIC ID to 5
- ioapic0 <Version 2.0> irqs 0-23 on motherboard
- kbd1 at kbdmux0
- ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
- acpi0: <INTEL S3000AH> on motherboard
- acpi0: Power Button (fixed)
- Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
- acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
- cpu0: <ACPI CPU> on acpi0
- acpi_perf0: <ACPI CPU Frequency Control> on cpu0
- acpi_perf0: failed in PERF_STATUS attach
- device_attach: acpi_perf0 attach returned 6
- acpi_perf0: <ACPI CPU Frequency Control> on cpu0
- acpi_perf0: failed in PERF_STATUS attach
- device_attach: acpi_perf0 attach returned 6
- cpu1: <ACPI CPU> on acpi0
- acpi_perf1: <ACPI CPU Frequency Control> on cpu1
- acpi_perf1: failed in PERF_STATUS attach
- device_attach: acpi_perf1 attach returned 6
- acpi_perf1: <ACPI CPU Frequency Control> on cpu1
- acpi_perf1: failed in PERF_STATUS attach
- device_attach: acpi_perf1 attach returned 6
- cpu2: <ACPI CPU> on acpi0
- acpi_perf2: <ACPI CPU Frequency Control> on cpu2
- acpi_perf2: failed in PERF_STATUS attach
- device_attach: acpi_perf2 attach returned 6
- acpi_perf2: <ACPI CPU Frequency Control> on cpu2
- acpi_perf2: failed in PERF_STATUS attach
- device_attach: acpi_perf2 attach returned 6
- cpu3: <ACPI CPU> on acpi0
- acpi_perf3: <ACPI CPU Frequency Control> on cpu3
- acpi_perf3: failed in PERF_STATUS attach
- device_attach: acpi_perf3 attach returned 6
- acpi_perf3: <ACPI CPU Frequency Control> on cpu3
- acpi_perf3: failed in PERF_STATUS attach
- device_attach: acpi_perf3 attach returned 6
- acpi_button0: <Sleep Button> on acpi0
- pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
- pci0: <ACPI PCI bus> on pcib0
- pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
- pci1: <ACPI PCI bus> on pcib1
- pcib2: <ACPI PCI-PCI bridge> at device 28.4 on pci0
- pci2: <ACPI PCI bus> on pcib2
- pcib3: <ACPI PCI-PCI bridge> at device 28.5 on pci0
- pci3: <ACPI PCI bus> on pcib3
- em0: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port 0x2000-0x201f mem 0xe8180000-0xe819ffff,0xe8100000-0xe817ffff irq 17 at device 0.0 on pci3
- em0: Ethernet address: 00:15:17:39:8e:f1
- pci3: <simple comms, UART> at device 0.3 (no driver attached)
- pci3: <serial bus> at device 0.4 (no driver attached)
- uhci0: <UHCI (generic) USB controller> port 0x3080-0x309f irq 23 at device 29.0 on pci0
- uhci0: [GIANT-LOCKED]
- usb0: <UHCI (generic) USB controller> on uhci0
- usb0: USB revision 1.0
- uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
- uhub0: 2 ports with 2 removable, self powered
- uhci1: <UHCI (generic) USB controller> port 0x3060-0x307f irq 19 at device 29.1 on pci0
- uhci1: [GIANT-LOCKED]
- usb1: <UHCI (generic) USB controller> on uhci1
- usb1: USB revision 1.0
- uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
- uhub1: 2 ports with 2 removable, self powered
- uhci2: <UHCI (generic) USB controller> port 0x3040-0x305f irq 18 at device 29.2 on pci0
- uhci2: [GIANT-LOCKED]
- usb2: <UHCI (generic) USB controller> on uhci2
- usb2: USB revision 1.0
- uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
- uhub2: 2 ports with 2 removable, self powered
- uhci3: <UHCI (generic) USB controller> port 0x3020-0x303f irq 16 at device 29.3 on pci0
- uhci3: [GIANT-LOCKED]
- usb3: <UHCI (generic) USB controller> on uhci3
- usb3: USB revision 1.0
- uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
- uhub3: 2 ports with 2 removable, self powered
- ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xe8200400-0xe82007ff irq 23 at device 29.7 on pci0
- ehci0: [GIANT-LOCKED]
- usb4: waiting for BIOS to give up control
- usb4: timed out waiting for BIOS
- usb4: EHCI version 1.0
- usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
- usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
- usb4: USB revision 2.0
- uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
- uhub4: 8 ports with 8 removable, self powered
- pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
- pci4: <ACPI PCI bus> on pcib4
- pci4: <display, VGA> at device 4.0 (no driver attached)
- em1: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port 0x1100-0x113f mem 0xe8020000-0xe803ffff,0xe8000000-0xe801ffff irq 17 at device 5.0 on pci4
- em1: Ethernet address: 00:15:17:39:8e:f2
- isab0: <;PCI-ISA bridge> at device 31.0 on pci0
- isa0: <ISA bus> on isab0
- atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x30b0-0x30bf irq 18 at device 31.1 on pci0
- ata0: <ATA channel 0> on atapci0
- ata1: <ATA channel 1> on atapci0
- atapci1: <Intel ICH7 SATA300 controller> port 0x30c8-0x30cf,0x30e4-0x30e7,0x30c0-0x30c7,0x30e0-0x30e3,0x30a0-0x30af mem 0xe8200000-0xe82003ff irq 19 at device
- ata2: <ATA channel 0> on atapci1
- ata3: <ATA channel 1> on atapci1
- pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
- fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f0 irq 6 drq 2 on acpi0
- fdc0: [FAST]
- sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
- sio0: type 16550A
- orm0: <ISA Option ROM> at iomem 0xc0000-0xc8fff on isa0
- atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
- atkbd0: <AT Keyboard> irq 1 on atkbdc0
- kbd0 at atkbd0
- atkbd0: [GIANT-LOCKED]
- ppc0: cannot reserve I/O port range
- sc0: <System console> at flags 0x100 on isa0
- sc0: VGA <16 virtual consoles, flags=0x300>
- sio1: configured irq 3 not in bitmap of probed irqs 0
- sio1: port may not be enabled
- vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
- Timecounters tick every 1.000 msec
- ad4: 305245MB <Seagate ST3320620SV 3.ACH> at ata2-master SATA150
- SMP: AP CPU #1 Launched!
- SMP: AP CPU #2 Launched!
- SMP: AP CPU #3 Launched!
|
|
免费注册
发表于 2008-01-04 09:49
呵呵~~~ 这个服务器是主要用来发布网站的。
