FreeBSD PPPoE拨号问题，要崩溃了！（附：配置）

pernlee

一个星期了，今天无意中PPPoE终于成功了，是因为我把FreeBSD的机器和ADSL都接到了交换机上，但是网卡直接连ADSL拨不通，在Windows 2003下以上两种连接都可以拨通。谁能告诉我这是为什么？

我不懂网络，只是想在FreeBSD下做些底层开发。

请问我在FreeBSD下用双网卡做ADSL共享，如何配置？把所有机器和ADSL都接到交换机上可以吗？老是提示ARP错误啊。

各位老大，救救我吧！

ppp.conf

default:
set log Phase tun command
set device PPPoE:re0
set speed sync
set mru 1492
set mtu 1492
nat enable yes
nat same_ports yes
nat use_sockets yes
enable dns
add! default HISADDR

adsl:
set authname USERNAME
set authkey PASSWORD
set dial
set login


rc.conf (ADSL的IP是：192.168.1.1)

usbd_enable="YES"
keyrate="fast"

ifconfig_re0="inet 192.168.1.21  netmask 255.255.255.0"
ifconfig_vr0="inet 192.168.0.1  netmask 255.255.255.0"
hostname="FreeBSD.48t.org"
#defaultrouter="192.168.1.1"

inetd_enable="YES"
geteway_enable="YES"
named_enable="YES"
ppp_enable="YES"
ppp_mode="ddial"
ppp_nat="YES"
ppp_profile="adsl"


ppp.log

Jan 10 01:19:26  newsyslog[538]: logfile first created
Jan 11 12:22:06 FreeBSD ppp[715]: Phase: Using interface: tun0
Jan 11 12:22:06 FreeBSD ppp[715]: Phase: deflink: Created in closed state
Jan 11 12:22:06 FreeBSD ppp[715]: tun0: Command: default: ident user-ppp VERSION (built COMPILATIONDATE)
Jan 11 12:22:06 FreeBSD ppp[715]: tun0: Command: default: set timeout 180
Jan 11 12:22:06 FreeBSD ppp[715]: tun0: Command: default: enable dns
Jan 11 12:22:06 FreeBSD ppp[715]: tun0: Command: adsl: set device PPPoE:re0
Jan 11 12:22:06 FreeBSD ppp[715]: tun0: Command: adsl: set authname ********
Jan 11 12:22:06 FreeBSD ppp[715]: tun0: Command: adsl: set authkey ********
Jan 11 12:22:06 FreeBSD ppp[715]: tun0: Command: adsl: set dial
Jan 11 12:22:06 FreeBSD ppp[715]: tun0: Command: adsl: set login
Jan 11 12:22:06 FreeBSD ppp[715]: tun0: Command: adsl: add default HISADDR
Jan 11 12:22:06 FreeBSD ppp[728]: tun0: Phase: PPP Started (ddial mode).
Jan 11 12:22:06 FreeBSD ppp[728]: tun0: Phase: bundle: Establish
Jan 11 12:22:06 FreeBSD ppp[728]: tun0: Phase: deflink: closed -> opening
Jan 11 12:22:06 FreeBSD ppp[728]: tun0: Phase: deflink: Connected!
Jan 11 12:22:06 FreeBSD ppp[728]: tun0: Phase: deflink: opening -> dial
Jan 11 12:22:06 FreeBSD ppp[728]: tun0: Phase: deflink: dial -> carrier
Jan 11 12:22:11 FreeBSD ppp[728]: tun0: Phase: deflink: Disconnected!
Jan 11 12:22:11 FreeBSD ppp[728]: tun0: Phase: deflink: carrier -> hangup
Jan 11 12:22:11 FreeBSD ppp[728]: tun0: Phase: deflink: Connect time: 5 secs: 0 octets in, 0 octets out
Jan 11 12:22:11 FreeBSD ppp[728]: tun0: Phase: deflink: 0 packets in, 0 packets out
Jan 11 12:22:11 FreeBSD ppp[728]: tun0: Phase:  total 0 bytes/sec, peak 0 bytes/sec on Fri Jan 11 12:22:06 2008
Jan 11 12:22:11 FreeBSD ppp[728]: tun0: Phase: deflink: hangup -> opening
Jan 11 12:22:11 FreeBSD ppp[728]: tun0: Phase: deflink: Enter pause (30) for redialing.
Jan 11 12:22:42 FreeBSD ppp[728]: tun0: Chat: deflink: Redial timer expired.
Jan 11 12:22:42 FreeBSD ppp[728]: tun0: Phase: deflink: Connected!
Jan 11 12:22:42 FreeBSD ppp[728]: tun0: Phase: deflink: opening -> dial
Jan 11 12:22:42 FreeBSD ppp[728]: tun0: Phase: deflink: dial -> carrier
Jan 11 12:22:47 FreeBSD ppp[728]: tun0: Phase: deflink: Disconnected!
Jan 11 12:22:47 FreeBSD ppp[728]: tun0: Phase: deflink: carrier -> hangup
Jan 11 12:22:47 FreeBSD ppp[728]: tun0: Phase: deflink: Connect time: 5 secs: 0 octets in, 0 octets out
Jan 11 12:22:47 FreeBSD ppp[728]: tun0: Phase: deflink: 0 packets in, 0 packets out
Jan 11 12:22:47 FreeBSD ppp[728]: tun0: Phase:  total 0 bytes/sec, peak 0 bytes/sec on Fri Jan 11 12:22:42 2008
Jan 11 12:22:47 FreeBSD ppp[728]: tun0: Phase: deflink: hangup -> opening
Jan 11 12:22:47 FreeBSD ppp[728]: tun0: Phase: deflink: Enter pause (30) for redialing.
Jan 11 12:23:17 FreeBSD ppp[728]: tun0: Chat: deflink: Redial timer expired.
Jan 11 12:23:17 FreeBSD ppp[728]: tun0: Phase: deflink: Connected!
Jan 11 12:23:17 FreeBSD ppp[728]: tun0: Phase: deflink: opening -> dial
Jan 11 12:23:17 FreeBSD ppp[728]: tun0: Phase: deflink: dial -> carrier
Jan 11 12:23:22 FreeBSD ppp[728]: tun0: Phase: deflink: Disconnected!
Jan 11 12:23:22 FreeBSD ppp[728]: tun0: Phase: deflink: carrier -> hangup
Jan 11 12:23:22 FreeBSD ppp[728]: tun0: Phase: deflink: Connect time: 5 secs: 0 octets in, 0 octets out
Jan 11 12:23:22 FreeBSD ppp[728]: tun0: Phase: deflink: 0 packets in, 0 packets out
Jan 11 12:23:22 FreeBSD ppp[728]: tun0: Phase:  total 0 bytes/sec, peak 0 bytes/sec on Fri Jan 11 12:23:17 2008
Jan 11 12:23:22 FreeBSD ppp[728]: tun0: Phase: deflink: hangup -> opening
Jan 11 12:23:22 FreeBSD ppp[728]: tun0: Phase: deflink: Enter pause (30) for redialing.


[ 本帖最后由 pernlee 于 2008-1-13 15:11 编辑 ]

zhangweizj

你也总该帖几个关于无法连接的错误日志，或者ppp的配置吧。

pernlee

同志们，看贴一定要回的！

pernlee

被浏览了96次，也没人回啊！

[ 本帖最后由 pernlee 于 2008-1-13 16:17 编辑 ]

信步云天

把　re0的netmask改为:255.255.255.255

pernlee

然后我客户端怎么配呢？

pernlee

还是收到ARP错误啊 kernel: arp: 192.168.0.23 is on vr0 but got reply from 00:1a:4d:9c:7b:09 on re0

pernlee

好像改成这样就可以了ifconfig_re0="inet 192.168.1.21  netmask 255.255.255.0 -arp"

congli

简单写一下就OK了,lz可以参考一下.

# cat /etc/rc.conf
ppp_enable="YES"
ppp_mode="ddial"
ppp_nat="YES"
ppp_profile="gzDSL"

# cat ppp.conf
default:
        set log Phase tun command
        set ifaddr 10.0.0.1/0 10.0.0.2/0
gzDSL:
        set device PPPoE:bge1
        set authname gzDSLxxxxx@163.gd
        set authkey xxxxxx
        set dial
        set login
        add default HISADDR

信步云天

打开服务器的nat功能。客户端网关是vr0。其它不用改