请教：在惠普安装腾机上安装informix 9.4时报错!~

太极球

各位好，我在安装时报如下错误，不知有没有人碰到过？麻烦指点一下，谢谢了！~
# ./ids_install

WARNING!
         This software, and its authorized use and number of users, are
subject to the applicable license agreement with IBM Corporation.
If the number of users exceeds the licensed number, the excess users may
be prevented from using the software.  UNAUTHORIZED USE OR COPYING MAY
SUBJECT YOU AND YOUR COMPANY TO SEVERE CIVIL AND CRIMINAL LIABILITIES.


Please Press RETURN to Continue, or (q/Q) to Quit :



IBM Informix Unix Bundle Installer

Installation Requirements:
- A user "informix" and a group "informix" must be known to the system.
- This installation procedure must be run by user root.
- Approximately 770 MB disk space required initially.
- Approximately 500 MB disk space if everything is installed (50 MB
  for ISA, 25 MB for JDBC).

0) All Products listed below
1) IBM Informix Dynamic Server 9.40
2) IBM Informix IConnect
3) IBM Informix JDBC
4) IBM Informix Server Administrator
5) Configure a Demo IDS Server (requires IDS)

Enter the number(s) of the products to install, separated by spaces
(i.e. "1 2 3"):
1
Install into directory (INFORMIXDIR) [/opt/informix] :


Installing IBM Informix Dynamic Server 9.40

771320 blocks
5310 blocks
85650 blocks
680220 blocks
/usr/lib/hpux64/dld.so: Unsatisfied data symbol '__memcmp_ver' in load module 'e
tc/brand'.
/usr/lib/hpux64/dld.so: Unsatisfied data symbol '__memmove_ver' in load module '
etc/brand'.
/usr/lib/hpux64/dld.so: Unsatisfied data symbol '__memset_ver' in load module 'e
tc/brand'.
/usr/lib/hpux64/dld.so: Unsatisfied data symbol '__strchr_ver' in load module 'e
tc/brand'.
/usr/lib/hpux64/dld.so: Unsatisfied data symbol '__strcmp_ver' in load module 'e
tc/brand'.
/usr/lib/hpux64/dld.so: Unsatisfied data symbol '__strcpy_ver' in load module 'e
tc/brand'.
/usr/lib/hpux64/dld.so: Unsatisfied data symbol '__strlen_ver' in load module 'e
tc/brand'.
/usr/lib/hpux64/dld.so: Unsatisfied data symbol '__strncat_ver' in load module '
etc/brand'.
/usr/lib/hpux64/dld.so: Unsatisfied data symbol '__strncmp_ver' in load module '
etc/brand'.
/usr/lib/hpux64/dld.so: Unsatisfied data symbol '__strncpy_ver' in load module '
etc/brand'.
/usr/lib/hpux64/dld.so: Unsatisfied data symbol '__strcat_ver' in load module 'e
tc/brand'.
etc/install[7]: 11886 Killed
    Server installation returned a Non-Zero value
Bundle Install program has finished
#

liaosnet

请提供具体的OS，数据库版本。

太极球

系统版本：
# uname -a
HP-UX hprx2600 B.11.23 U ia64 0838997825 unlimited-user license
数据库版本：
Informix9.40FC9.HPItanium64bit

liaosnet

首先修改下系统参数
$INFORMIXDIR/release/en_us/0333/ids_machine_notes_9.40.txt 中的Kernel Parameters部分。
然后使用./installserver安装试下。。

[ 本帖最后由 liaosnet 于 2008-5-4 16:07 编辑 ]

太极球

请问要怎样改？改成什么？能不能说详细点？谢谢了！~

liaosnet

The values of the kernel parameters that were used for testing this
    product are given below.  These values might need to be tuned depending
    on the application and availability of system resources.  On HP-UX,
    these entries are in /stand/system.
//将下面的信息加入到/stand/system文件中，注意是否有与现有冲突。做完后重启系统。
    nfile: 5000
    semmni: 3000
    semmns: 3000
    semmnu: 1400
    shmmax: 4294967296
    shmmni: 500
    shmseg: 500

[ 本帖最后由 liaosnet 于 2008-5-4 16:41 编辑 ]

太极球

谢了，我先去试下^_^

太极球

我刚试了一下，还是没有解决。不知是为什么？

太极球

我刚试了一下，还是没有解决。不知是为什么？

liaosnet

请把相关信息帖出来?是否还是原来的情况??