- 论坛徽章:
- 0
|
System Configuration: Sun Microsystems sun4u Sun (TM) Enterprise 250 (UltraSPARC-II 400MHz)
System clock frequency: 100 MHz
Memory size: 256 Megabytes
========================= CPUs =========================
Run Ecache CPU CPU
Brd CPU Module MHz MB Impl. Mask
--- --- ------- ----- ------ ------ ----
SYS 0 0 400 2.0 US-II 10.0
========================= Memory =========================
Interlv. Socket Size
Bank Group Name (MB) Status
---- ----- ------ ---- ------
0 none U0701 64 OK
0 none U0801 64 OK
0 none U0901 64 OK
0 none U1001 64 OK
========================= IO Cards =========================
Bus Freq
Brd Type MHz Slot Name Model
--- ---- ---- ---- -------------------------------- ----------------------
SYS PCI 33 0 TSI,gfxp GFXP
No failures found in System
===========================
========================= Environmental Status =========================
System Temperatures (Celsius):
------------------------------
CPU0 40
MB0 30
MB1 25
PDB 26
SCSI 22
=================================
Front Status Panel:
-------------------
Keyswitch position is in On mode.
System LED Status: DISK ERROR POWER
[OFF] [ ON]
POWER SUPPLY ERROR ACTIVITY
[ ON] [ ON]
GENERAL ERROR THERMAL ERROR
[ ON] [OFF]
=================================
Disk LED Status: OK = GREEN ERROR = YELLOW
DISK 5: [EMPTY] DISK 3: [EMPTY] DISK 1: [OK]
DISK 4: [EMPTY] DISK 2: [OK] DISK 0: [OK]
=================================
Fan Bank :
----------
Bank Speed Status
(0-255)
---- ----- ------
SYS 161 OK
=================================
Power Supplies:
---------------
Supply Status
------ ------
0 FAILED: DC Power Failure
1 OK
========================= HW Revisions =========================
ASIC Revisions:
---------------
STP2223BGA: Rev 4
STP2003QFP: Rev 1
System PROM revisions:
----------------------
OBP 3.16.1 1999/04/19 07:55 POST 6.0.9 1999/04/19 07:57
扩容所需要注意哪些环节???
上面是我的测试机..请问该如何对其扩容! |
|
免费注册
发表于 2008-05-23 16:07
