- 论坛徽章:
- 0
|
SunOS Release 5.10 Version Generic 64-bit
Copyright 1983-2005 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
Configuring devices.
Using RPC Bootparams for network configuration information.
Attempting to configure interface bge0...
Skipped interface bge0
Beginning system identification...
Searching for configuration file(s)...
Search complete.
Discovering additional network configuration...
Select a Language
0. English
1. French
2. German
3. Italian
4. Japanese
5. Korean
6. Simplified Chinese
7. Spanish
8. Swedish
9. Traditional Chinese
Please make a choice (0 - 9), or press h or ? for help: 0
What type of terminal are you using?
1) ANSI Standard CRT
2) DEC VT52
3) DEC VT100
4) Heathkit 19
5) Lear Siegler ADM31
6) PC Console
7) Sun Command Tool
8) Sun Workstation
9) Televideo 910
10) Televideo 925
11) Wyse Model 50
12) X Terminal Emulator (xterms)
13) CDE Terminal Emulator (dtterm)
14) Other
Type the number of your choice and press Return: 3
Completing system identification...
in.rdisc: No interfaces up
The Solaris Installation Program
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
The Solaris installation program is divided into a series of short sections
where
you'll be prompted to provide information for the installation.
At
the end of each section, you'll be able to change the
selections you've
made before continuing.
About
navigation...
- The mouse cannot be used
- If your keyboard does not have function keys, or they do not
respond, press ESC; the legend at the bottom of the screen
will change to show the ESC keys to use for navigation.
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F6_Help
Identify This System
On the next screens, you must identify this system as networked or
non-networked, and set the default time zone and date/time.
If this system is networked, the software will try to
find the information
it needs to identify your system;
you will be prompted to supply any
information it cannot find.
> To begin identifying this system,
press F2.qqqqqqqqqqqqqqqqqqq
F2_Continue F6_Help
Network Connectivity
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
Specify Yes if the system is connected to the
network by one of the Solaris
or vendor network/communication
Ethernet cards that are supported on the
Solaris CD.
See your hardware documentation for the current list of
supported cards.
Specify No if the system is connected to
a network/communication card that
is not supported on the
Solaris CD, and follow the instructions listed under
Help.
Networked
qqqqqqqqq
X][C[0mYes
No[8B
[0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F6_Help
DHCP for bge0 qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
Specify whether or not this network interface should use DHCP to configure
itself. Choose Yes if DHCP is to be used, or No if the network interface is
to be configured manually.
NOTE: DHCP support will not be enabled, if selected, until after the system
reboots.
Use DHCP for bge0
[ ] Yes
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F6_Help Host Name for bge0 qqqqqqqqqqqqqqqqqqqqqqqqqqqq
Enter the host name which identifies this system on the network. The name
must be unique within your domain; creating a duplicate host name will cause
problems on the network after you install Solaris.
A host name must be at least two characters; it can contain letters, digits,
and minus signs (-).
Host name for bge0 qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F6_Help IP Address for bge0 qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
Enter the Internet Protocol (IP) address for this network interface. It
must be unique and follow your site's address conventions, or a
system/network failure could result.
IP addresses contain four sets of numbers separated by periods (for example
129.200.9.1).
IP address for bge0 qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F6_Help
160.95.227.40
Subnet for bge0
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
On this screen you must specify whether this system is part of a subnet. If
you specify incorrectly, the system will have problems communicating on the
network after you reboot.
> To make a selection, use the arrow keys to highlight the option and
press Return to mark it [X].
System part of a subnet
Yes
[ ] No
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F6_Help
Netmask for bge0
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
On this screen you must specify the netmask of your subnet. A default
netmask is shown; do not accept the default unless you are sure it is
correct for your subnet. A netmask must contain four sets of numbers
separated by periods (for example 255.255.255.0).
Netmask for bge0 255.255.255.0
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F6_Help
255.255.255.0
IPv6 for bge0
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
Specify whether or not you want to enable IPv6, the next generation Internet
Protocol, on this network interface. Enabling IPv6 will have no effect if
this machine is not on a network that provides IPv6 service. IPv4 service
will not be affected if IPv6 is enabled.
> To make a selection, use the arrow keys to highlight the option and
press Return to mark it [X].
Enable IPv6 for bge0
qqqqqqqqqqqqqqqqqqqq
[ ] Yes
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F6_Help
Please wait...
Set the Default Route for bge0
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
To specify the default route, you can let the software try to detect one
upon reboot, you can specify the IP address of the router, or you can choose
None. Choose None if you do not have a router on your subnet.
> To make a selection, use the arrow keys to select your choice and press
Return to mark it [X].
Default Route for bge0
Detect one upon reboot
Specify one
None
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F6_Help
Default Route IP Address for bge0
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
Enter the IP address of the default route. This entry will be placed in the
/etc/defaultrouter file and will be the default route after you reboot
(example 129.146.89.225).
Router IP Address for bge0
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F6_Help
160.95.227.1
160.95.227.1
Confirm Information for bge0
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
Confirm the following information.
If it is correct, press F2;
to change any information, press F4.
Networked: Yes
Use DHCP: No
Host name: SUNS01
IP address: 160.95.227.40
System part of a subnet: Yes
Netmask: 255.255.255.0
Enable IPv6: No
Default Route: Specify one
Router IP Address: 160.95.227.1
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F4_Change F6_Help[K
[2A [0;1;7mJust a moment...
Configure Security Policy: qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
Specify Yes if the system will use the Kerberos security mechanism.
Specify No if this system will use standard UNIX security.
Configure Kerberos Security
qqqqqqqqqqqqqqqqqqqqqqqqqqq
[ ] Yes
No
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F6_Help
Confirm Information qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
Confirm the following information. If it is correct, press F2;
to change any information, press F4.
Configure Kerberos Security: No
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F4_Change F6_Help
Please wait...
Starting remote procedure call (RPC) services:Name Service
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
On this screen you must provide name service information. Select the name
service that will be used by this system, or None if your system will either
not use a name service at all, or if it will use a name service not listed
here.
> To make a selection, use the arrow keys to highlight the option
and press Return to mark it [X].
Name service
qqqqqqqqqqqq
NIS+
[ ] NIS
[ ] DNS
[ ] LDAP
[ ] None
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F6_Help
Confirm Information qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
Confirm the following information. If it is correct, press F2;
to change any information, press F4.
Name service: None qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F4_Change F6_Help[K
[2A [0;1;7mJust a moment...
done.
Time Zone qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
On this screen you must specify your default time zone. You can specify a
time zone in three ways: select one of the continents or oceans from the
list, select other - offset from GMT, or other - specify time zone file.
> To make a selection, use the arrow keys to highlight the option and
Dpress Return to mark it [X].
Continents and Oceans
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
Africa
[ ] Americas
[ ] Antarctica
[ ] Arctic Ocean
[ ] Asia
[ ] Atlantic Ocean
[ ] Australia
[ ] Europe
v [ ] Indian Ocean
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F6_Help[11A[20D[ ]
Country or Region qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
To make a selection, use the arrow keys to highlight the option and
Dpress Return to mark it [X].
Countries and Regions
qqqqqqqqqqqqqqqqqqqqqqqq
Afghanistan
[ ] Armenia
[ ] Azerbaijan
[ ] Bahrain
[ ] Bangladesh
[ ] Bhutan
[ ] Brunei
[ ] Cambodia
[ ] China
[ ] Cyprus
[ ] East Timor
[ ] Georgia
v [ ] Hong Kong
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F6_Help[15A[20D[ ]
Please wait...
Date and Time qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
Accept the default date and time or enter
Dnew values.
Date and time: 2005-12-26 17:58
Year (4 digits) : 2005
Month (1-12) : 12
Day (1-31) : 26
Hour (0-23) : 17
Minute (0-59) : 58
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F6_Help
Confirm Information qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
Confirm the following information. If it is correct, press F2;
to change any information, press F4.
Time zone: PRC
Date and time: 2005-12-26 17:58:00
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F4_Change F6_Help
Please wait...
Root Password
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
Please enter the root password for this system.
The root password may contain alphanumeric and special characters. For
security, the password will not be displayed on the screen as you type it.
> If you do not want a root password, leave both entries blank.
Root password:
Root password:
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F6_Help
Press F2 to go to the next screen.
F2_Continue F6_Help
>System identification is completed.
System identification complete.
Starting Solaris installation program...
Executing JumpStart preinstall phase...
Searching for SolStart directory...
Checking rules.ok file...
Using begin script: install_begin
Using finish script: patch_finish
Executing SolStart preinstall phase...
Executing begin script "install_begin"...
Begin script install_begin execution completed.
Solaris Interactive Installation qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
On the following screens, you can accept the defaults or you can customize
how Solaris software will be installed by:
- Selecting the type of Solaris software to install
- Selecting disks to hold software you've selected
- Selecting unbundled products to be installed with Solaris
- Specifying how file systems are laid out on the disks
After completing these tasks, a summary of your selections (called a
profile) will be displayed.
There are two ways to install your Solaris software:
- "Standard" installs your system from a standard Solaris Distribution.
[68DSelecting "Standard" allows you to choose between initial install
[65Dand upgrade, if your system is upgradable.
- "Flash" installs your system from one or more Flash Archives.
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Standard F4_Flash F5_Exit F6_Help
Eject a CD/DVD Automatically?
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
During the installation of Solaris software, you may be using one or more
CDs/DVDs. You can choose to have the system eject each CD/DVD automatically
after it is installed or you can choose to manually eject each CD/DVD.
Automatically eject CD/DVD
Manually eject CD/DVD
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F3_Go Back F5_Exit
Reboot After Installation?
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
[2C[0mAfter Solaris software is installed, the system must be rebooted. You can
choose to have the system automatically reboot, or you can choose to
manually reboot the system if you want to run scripts or do other
customizations before the reboot. You can manually reboot a system by using
the reboot(1M) command.
Auto Reboot
Manual Reboot
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F3_Go Back F5_Exit
Solaris Interactive Installation
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
This system is upgradable, so there are two ways to install the Solaris
software.
The Upgrade option updates the Solaris software to the new release, saving
as many modifications to the previous version of Solaris software as
possible. Back up the system before using the Upgrade option.
The Initial option overwrites the system disks with the new version of
Solaris software. This option allows you to preserve any existing file
systems. Back up any modifications made to the previous version of Solaris
software before starting the Initial option.
After you select an option and complete the tasks that follow, a summary of
your actions will be displayed
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Upgrade F3_Go Back F4_Initial F5_Exit F6_Help
[2A [0;1;7m Please wait ...
Initializing
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
The system is being initialized.
Loading install media, please wait...License
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
Sun Microsystems, Inc. ("Sun")
SOFTWARE LICENSE AGREEMENT
READ THE TERMS OF THIS AGREEMENT ("AGREEMENT") CAREFULLY BEFORE
OPENING SOFTWARE MEDIA PACKAGE. BY OPENING SOFTWARE MEDIA
PACKAGE, YOU AGREE TO THE TERMS OF THIS AGREEMENT. IF YOU ARE
ACCESSING SOFTWARE ELECTRONICALLY, INDICATE YOUR ACCEPTANCE OF
THESE TERMS BY SELECTING THE "ACCEPT"(OR EQUIVALENT) BUTTON AT
THE END OF THIS AGREEMENT. IF YOU DO NOT AGREE TO ALL OF THE
TERMS, PROMPTLY RETURN THE UNUSED SOFTWARE TO YOUR PLACE OF
PURCHASE FOR A REFUND OR, IF SOFTWARE IS ACCESSED ELECTRONICALLY,
SELECT THE "DECLINE" (OR EQUIVALENT) BUTTON AT THE END OF THIS
AGREEMENT. IF YOU HAVE SEPARATELY AGREED TO LICENSE TERMS
("MASTER TERMS") FOR YOUR LICENSE TO THIS SOFTWARE, THEN SECTIONS
1-6 OF THIS AGREEMENT ("SUPPLEMENTAL LICENSE TERMS") SHALL
SUPPLEMENT AND SUPERSEDE THE MASTER TERMS IN RELATION TO THIS
SOFTWARE.
v 1. Definitions.
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Accept License F5_Exit
Select Geographic Regions
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
Select the geographic regions for which support should be installed.
> [ ] Asia
> [ ] Northern Africa
> [ ] Middle East
> [ ] South America
> [ ] Central America
> [ ] Australasia
> [ ] Southern Europe
> [ ] Northern Europe
> [ ] Eastern Europe
> [ ] Central Europe
> [ ] North America
> [ ] Western Europe[6B
[0;1;7m Press Return to show components
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F3_Go Back F5_Exit F6_Help
Move left, right, up, down using the arrow keys
Select System Locale
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
Select the initial locale to be used after the system has been installed.
POSIX C ( C )
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F3_Go Back F5_Exit F6_Help
Select Products
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
Select the products you would like to install.
> [ ] Solaris 10 Extra Value Software................. 0.00 MB
> [ ] Solaris 10 Documentation........................ 0.00 MB
> [ ] Java Enterprise System.......................... 0.00 MB
> [ ] Solaris Software Companion CD................... 0.00 MB[14B
[0;1;7m Press Return to show components
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F3_Go Back F4_Product Info F5_Exit F6_Help[8C[2A[76D[0;1;7mMove left, right, up, down using the arrow keys
Additional Products qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
To scan for additional products, select the location you wish to scan.
Products found at the selected location that are in a Web Start Ready
install form will be added to the Products list.
Web Start Ready product scan location:
None
[ ] CD/DVD
[ ] Network File System
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F3_Go Back F5_Exit
Please wait ...Select Software
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
Select the Solaris software to install on the system.
NOTE: After selecting a software group, you can add or remove software by
customizing it. However, this requires understanding of software
dependencies and how Solaris software is packaged.
[ ] Entire Distribution plus OEM support ....... 4779.00 MB
Entire Distribution ........................ 4738.00 MB
[ ] Developer System Support ................... 4603.00 MB
[ ] End User System Support .................... 3557.00 MB
[ ] Core System Support ........................ 777.00 MB
[ ] Reduced Networking Core System Support ..... 736.00
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F3_Go Back F4_Customize F5_Exit F6_Help
Please wait ...
Select Disks
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
On this screen you must select the disks for installing Solaris software.
Start by looking at the Suggested Minimum field; this value is the
approximate space needed to install the software you've selected. Keep
selecting disks until the Total Selected value exceeds the Suggested Minimum
value.
NOTE: ** denotes current boot disk
Disk Device Available Space
=============================================================================
143C139989 MB
Total Selected: 0 MB
Suggested Minimum: 3627 MB
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F3_Go Back F4_Edit F5_Exit F6_Help
(F4 to edit)
Preserve Dataqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
Do you want to preserve existing data? At least one of the disks you've
selected for installing Solaris software has file systems or unnamed slices
that you may want to save
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F3_Go Back F4_Preserve F5_Exit F6_Help
Automatically Layout File Systems?
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
Do you want to use auto-layout to automatically layout file systems?
Manually laying out file systems requires advanced system administration
skills.
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Auto Layout F3_Go Back F4_Manual Layout F5_Exit F6_Help
File System and Disk Layout
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
The summary below is your current file system and disk layout, based on the
information you've supplied.
NOTE: If you choose to customize, you should understand file systems, their
intended purpose on the disk, and how changing them may affect the operation
of the system.
File sys/Mnt point Disk/Slice Size
========================================================================
overlap c0t0d0s2 139989 MB
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F3_Go Back F4_Customize F5_Exit F6_Help
Customize Disk: c0t0d0
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
Entry:Recommended MB Minimum: MB
================================================================================
Slice Mount Point[17CSize (MB)
overlap 139989
0
================================================================================
Capacity: 139989 MB
Allocated:[11C0 MB
Free: 139989 MB
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_OK F4_Options F5_Cancel F6_Help
Rounding Error 1
Free: 119776 MB
/data 119001
File System and Disk Layout
The summary below is your current file system and disk layout, based on the
information you've supplied.
NOTE: If you choose to customize, you should understand file systems, their
intended purpose on the disk, and how changing them may affect the operation
of the system.
File sys/Mnt point Disk/Slice Size
========================================================================
/ c0t0d0s0 15999 MB
swap c0t0d0s1 4104 MB
overlap c0t0d0s2 139989 MB
/data c0t0d0s6 119001 MB
c0t0d0s7 109 MB
F2_Continue F3_Go Back F4_Customize F5_Exit F6_Help
Mount Remote File Systems? qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
Do you want to mount software from a remote file server? This may be
necessary if you had to remove software because of disk space problems.
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F3_Go Back F4_Remote Mounts F5_Exit F6_Help
Profileqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
The information shown below is your profile for installing Solaris software.
It reflects the choices you've made on previous screens.
============================================================================
Installation Option: Initial
Boot Device: c0t0d0
Client Services: None
System Locale: C ( C )
Software: Solaris 10, Entire Distribution plus OEM su
File System and Disk Layout: / c0t0d0s0 15999 MB
swap c0t0d0s1 4104 MB
/data c0t0d0s6 119001 MB
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Begin Installation F4_Change F5_Exit F6_Help
Warning
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
The following disk configuration condition(s) have been
detected. Errors must be fixed to ensure a successful
installation. Warnings can be ignored without causing the
installation to fail.
WARNING: Unused disk space (c0t0d0)
WARNING: CHANGING DEFAULT BOOT DEVICE
You have either explicitly changed the default boot device, or
accepted the default to "Reconfigure EEPROM". In either case,
the system's EEPROM will be changed so it will always boot
Solaris from the device that you've specified. If this is not
what you had in mind, go back to the disk selection screens and
change the "Reconfigure EEPROM" setting.
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_OK F5_Cancel
Preparing system for Solaris install
Configuring disk (c0t0d0)
- Creating Solaris disk label (VTOC)
Creating and checking UFS file systems
- Creating / (c0t0d0s0)
- Creating /data (c0t0d0s6)
Beginning Solaris software installation
Solaris Initial Install
MBytes Installed: 0.00
DMBytes Remaining: 3040.65
Installing: Open Card Framework
Solaris 10 software installation succeeded
Customizing system files
- Mount points table (/etc/vfstab)
- Network host addresses (/etc/hosts)
- Network host addresses (/etc/hosts)
- Environment variables (/etc/default/init)
Cleaning devices
Customizing system devices
- Physical devices (/devices)
- Logical devices (/dev)
Installing boot information
- Installing boot blocks (c0t0d0s0)
- Updating system firmware for automatic rebooting
Installation log location
- /a/var/sadm/system/logs/install_log (before reboot)
- /var/sadm/system/logs/install_log (after reboot)
Installation complete
Executing SolStart postinstall phase...
Executing finish script "patch_finish"...
Finish script patch_finish execution completed.
Executing JumpStart postinstall phase...
The begin script log 'begin.log'
is located in /var/sadm/system/logs after reboot.
The finish script log 'finish.log'
is located in /var/sadm/system/logs after reboot.
Launching installer. Please Wait...
Installing Additional Software
|-1%--------------25%-----------------50%-----------------75%--------------100%|
Pausing for 30 seconds at the "Summary" screen. The wizard will continue to
the next step unless you select "Pause". Enter 'p' to pause. Enter 'c' to
continue. [c] c
Pausing for 90 seconds at the "Reboot" screen. The wizard will continue to
the next step unless you select "Pause". Enter 'p' to pause. Enter 'c' to
continue. [c] c
syncing file systems... done
rebooting...
Sun Blade 2500 (Silver), No Keyboard
Copyright 1998-2004 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.16.4, 6144 MB memory installed, Serial #66253227.
Ethernet address 0:3:ba:f2:f1:ab, Host ID: 83f2f1ab.
Initializing 1MB of memory at addr 133fdea000 -
Initializing 14MB of memory at addr 133f002000 -
Initializing 16MB of memory at addr 133e002000 -
Initializing 992MB of memory at addr 1300000000 /-
Initializing 1024MB of memory at addr 1200000000 /-
Initializing 1024MB of memory at addr 300000000 /-
Initializing 1024MB of memory at addr 200000000 /-
Initializing 1024MB of memory at addr 100000000 /-
Initializing 1024MB of memory at addr 0 /-
Rebooting with command: boot
Boot device: /pci@1d,700000/scsi@4/disk@0,0:a File and args:
SunOS Release 5.10 Version Generic 64-bit
Copyright 1983-2005 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
Hostname: SUNS01
Configuring devices.
Loading smf(5) service descriptions:
/dev/rdsk/c0t0d0s6: is logging.
Creating new rsa public/private host key pair
Creating new dsa public/private host key pair
Configuring network interface addresses: bge0.
This system is configured with NFS version 4, which uses a domain
name that is automatically derived from the system's name services.
The derived domain name is sufficient for most configurations. In a
few cases, mounts that cross different domains might cause files to
be owned by "nobody" due to the lack of a common domain name.
Do you need to override the system's default NFS version 4 domain
name (yes/no) ? [no] :
For more information about how the NFS version 4 default domain
name is derived and its impact, refer to the man pages for nfs(4)
and nfsmapid(1m), and the System Administration Guide: Network
Services.
SUNS01 console login: Dec 26 18:51:16 SUNS01 sendmail[851]: My unqualified host name (SUNS01) unknown; sleeping for retry
SUNS01 console login: root
Password:
Login incorrect
SUNS01 console login:
SUNS01 console login: root
Password:
Dec 26 18:51:50 SUNS01 login: ROOT LOGIN /dev/console
Sun Microsystems Inc. SunOS 5.10 Generic January 2005
#
#
#
#
#
#
# TERM=vt100;export TERM
#
#
# vi /etc/default/login
"/etc/default/login" [Read only] 77 lines, 2258 characters #ident "@(#)login.dfl 1.14 04/06/25 SMI"[H
#
# Copyright 2004 Sun Microsystems, Inc. All rights reserved.
# Use is subject to license terms.
# Set the TZ environment variable of the shell.
#
#TIMEZONE=EST5EDT
# ULIMIT sets the file size limit for the login. Units are disk blocks.
# The default of zero means no limit.
#
#ULIMIT=0
# If CONSOLE is set, root can only login on that device.
# Comment this line out to allow remote login by root.
#
#CONSOLE=/dev/console
# PASSREQ determines if login requires a password.
#
PASSREQ=YES
23B"/etc/default/login" [Read only] 77 lines, 2258 characters[H
Dec 26 18:52:16 SUNS01 sendmail[851]: unable to qualify my own domain name (SUNS01) -- using short name
Dec 26 18:52:16 SUNS01 sendmail[851]: [ID 702911 mail.alert] unable to qualify my own domain name (SUNS01) -- using short name
Dec 26 18:52:16 SUNS01 sendmail[872]: My unqualified host name (SUNS01) unknown; sleeping for retry
Dec 26 18:52:16 SUNS01 sendmail[873]: My unqualified host name (SUNS01) unknown; sleeping for retry
:q!
#
# vi /etc/hosts
"/etc/hosts" [Read only] 5 lines, 78 characters
# Internet host table
#
127.0.0.1[7Clocalhost
160.95.227.40 SUNS01 loghost
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~[H[23B"/etc/hosts" [Read only] 5 lines, 78 characters[H
160.95.227.40 SUNS01 loghost DSUNS01 loghost Not an editor command
:wq!
"/etc/hosts" 5 lines, 88 characters
# Dec 26 18:53:16 SUNS01 sendmail[873]: [ID 702911 mail.alert] unable to qualify my own domain name (SUNS01.) -- using short name
Dec 26 18:53:16 SUNS01 sendmail[872]: [ID 702911 mail.alert] unable to qualify my own domain name (SUNS01.) -- using short name
Dec 26 18:53:16 SUNS01 sendmail[873]: unable to qualify my own domain name (SUNS01.) -- using short name
Dec 26 18:53:16 SUNS01 sendmail[872]: unable to qualify my own domain name (SUNS01.) -- using short name
#
#
#
# vi /etc/default/login
[24;1H[?1h="/etc/default/login" [Read only] 77 lines, 2258 characters [H[J#ident "@(#)login.dfl 1.14 04/06/25 SMI"[H
#
# Copyright 2004 Sun Microsystems, Inc. All rights reserved.
# Use is subject to license terms.
# Set the TZ environment variable of the shell.
#
#TIMEZONE=EST5EDT
# ULIMIT sets the file size limit for the login. Units are disk blocks.
# The default of zero means no limit.
#
#ULIMIT=0
# If CONSOLE is set, root can only login on that device.
# Comment this line out to allow remote login by root.
#
CONSOLE=/dev/console
# PASSREQ determines if login requires a password.
#
PASSREQ=YES
[23B"/etc/default/login" [Read only] 77 lines, 2258 characters[H
#CONSOLE=/dev/console
#[6B[K:wq!
"/etc/default/login" 77 lines, 2259 characters
# vi /etc/ftpd/ftpusers
="/etc/ftpd/ftpusers" 19 lines, 198 characters [H[J# ident "@(#)ftpusers 1.5 04/02/20 SMI"[H
#
# List of users denied access to the FTP server, see ftpusers(4).
#
#root
daemon
bin
sys
adm
lp
uucp
nuucp
smmsp
listen
gdm
webservd
nobody
noaccess
nobody4
~
~
~
[23B"/etc/ftpd/ftpusers" 19 lines, 198 characters[H
#root
#[19B[K:wq!
"/etc/ftpd/ftpusers" 19 lines, 199 characters
#
# cd /cdrom
# ls
cdrom0 eis-cd
# cd cdrom0
# ls
CONTENTS.txt DISCLAIMER.txt history.txt sun2 sun4
COPYRIGHT README-29NOV05 sun sun3
# cd sun
# ls
install patch progs tools
# cd install
# ls
bin local-bin profile-EIS
copy-cd2sun.sh local-bin_x86 profile-root
copy-dvd2sun.sh make-cd-images setup-standard.sh
# ./setup_-standard.sh
Running setup-standard with EIS-CD Vn 29-NOV-05
===============================================
Creating /var/sun for scripts, log files etc...
Loading /opt/sun/bin...
Setting up /.profile...
Is the power saving daemon to be disabled? [y/n]: y
/etc/power.conf has been modified.
Sun keyboard Power button to be disabled? [y/n]: y
/usr/openwin/lib/speckeysd.map has been modified.
Are the buttons & dials to be disabled? [y/n]: y
File /etc/rc2.d/S89bdconfig has been renamed to /etc/rc2.d/noS89bdconfig
Remote ROOT logins probably enabled: See /etc/default/login...
Skipping over installation SAN Foundation Suite for SunOS 5.10
***********************************************************
* The system will break to the OBP prompt (thus stopping *
* operation) if a break signal is seen on the serial port.*
* This can happen when the device attached to the serial *
* port (e.g. workstation or terminal) is powered on. *
* This behaviour can be prevented by setting the *
* Alternate Break Sequence in /etc/default/kbd. *
***********************************************************
Do you wish to ENABLE the alternate break sequence? [E/n]: E
Please note that the new break sequence is: ~ ^B (no spaces)
(i.e. Carriage return, tilde, control-B)
Automated Core File Analysis Tool (ACT).....
ACT Package is not installed - Version 8.10 available....
Do you want to install the ACT package? [y/n]: n
Explorer Package not present - will install Version 5.2,REV=2005.08.31.01.48...
Processing package instance from
Sun(TM) Explorer Data Collector(all) 5.2,REV=2005.08.31.01.48
Copyright 1996-2005 Sun Microsystems, Inc.
All rights reserved.
## Executing checkinstall script.
Using as the package base directory.
## Processing package information.
## Processing system information.
## Verifying disk space requirements.
## Checking for conflicts with packages already installed.
## Checking for setuid/setgid programs.
This package contains scripts which will be executed with super-user
permission during the process of installing this package.
Do you want to continue with the installation of [y,n,?]
Installing Sun(TM) Explorer Data Collector as
## Executing preinstall script.
## Installing part 1 of 1.
/opt/SUNWexplo/LICENSEREADME/LICENSE.txt
/opt/SUNWexplo/LICENSEREADME/THIRDPARTYLICENSEREADME.txt
/opt/SUNWexplo/LICENSEREADME/gzip-1.2.4a.tar.gz
/opt/SUNWexplo/LICENSEREADME/wget-1.9.tar.gz
/opt/SUNWexplo/bin/capture.sparc
/opt/SUNWexplo/bin/core_check.sh
/opt/SUNWexplo/bin/diskinfo.i386
/opt/SUNWexplo/bin/diskinfo.sparc
/opt/SUNWexplo/bin/exp_defaults
/opt/SUNWexplo/bin/explorer
/opt/SUNWexplo/bin/explorer_notify_update
/opt/SUNWexplo/bin/instinfo_config
/opt/SUNWexplo/bin/j2se_config
/opt/SUNWexplo/bin/mktime.i386
/opt/SUNWexplo/bin/mktime.sparc
/opt/SUNWexplo/bin/rprtfru.sparc
/opt/SUNWexplo/bin/se3kxtr.ksh
/opt/SUNWexplo/bin/snapshot
/opt/SUNWexplo/bin/st_diag.i386
/opt/SUNWexplo/bin/st_diag.sparc
/opt/SUNWexplo/bin/sunone_config
/opt/SUNWexplo/bin/sunone_ps
/opt/SUNWexplo/bin/wget.i386
/opt/SUNWexplo/bin/wget.sparc
/opt/SUNWexplo/doc/CHANGES
/opt/SUNWexplo/doc/README
/opt/SUNWexplo/doc/README.j2se_config
/opt/SUNWexplo/doc/README.man
/opt/SUNWexplo/doc/README.sunone_config
/opt/SUNWexplo/java/fruid-scappclient.jar
/opt/SUNWexplo/java/libfru.jar
/opt/SUNWexplo/lib/AMERICAS_countries.1
/opt/SUNWexplo/lib/AMERICAS_countries.2
/opt/SUNWexplo/lib/AMERICAS_countries.3
/opt/SUNWexplo/lib/AMERICAS_countries_codes
/opt/SUNWexplo/lib/APAC_countries.1
/opt/SUNWexplo/lib/APAC_countries.2
/opt/SUNWexplo/lib/APAC_countries.3
/opt/SUNWexplo/lib/APAC_countries.4
/opt/SUNWexplo/lib/APAC_countries_codes
/opt/SUNWexplo/lib/EMEA_countries.1
/opt/SUNWexplo/lib/EMEA_countries.2
/opt/SUNWexplo/lib/EMEA_countries.3
/opt/SUNWexplo/lib/EMEA_countries.4
/opt/SUNWexplo/lib/EMEA_countries.5
/opt/SUNWexplo/lib/EMEA_countries.6
/opt/SUNWexplo/lib/EMEA_countries.7
/opt/SUNWexplo/lib/EMEA_countries.8
/opt/SUNWexplo/lib/EMEA_countries_codes
/opt/SUNWexplo/lib/cmd.txt
/opt/SUNWexplo/lib/cmd_ssh.txt
/opt/SUNWexplo/lib/crontab.txt
/opt/SUNWexplo/lib/exp_check
/opt/SUNWexplo/lib/exp_common
/opt/SUNWexplo/lib/exp_file
/opt/SUNWexplo/lib/exp_ftp
/opt/SUNWexplo/lib/exp_j2se
/opt/SUNWexplo/lib/exp_mail
/opt/SUNWexplo/lib/exp_main
/opt/SUNWexplo/lib/exp_postproc
/opt/SUNWexplo/lib/exp_sunone
/opt/SUNWexplo/lib/exp_tools
/opt/SUNWexplo/lib/exp_transport
/opt/SUNWexplo/lib/libfru.so
/opt/SUNWexplo/lib/libfru.so.1
/opt/SUNWexplo/lib/libfrujni.so
/opt/SUNWexplo/lib/libfrujni.so.1
/opt/SUNWexplo/lib/libfrureg.so
/opt/SUNWexplo/lib/libfrureg.so.1
/opt/SUNWexplo/lib/libfrurmi.so
/opt/SUNWexplo/lib/libfrurmi.so.1
/opt/SUNWexplo/lib/libfruutils.so
/opt/SUNWexplo/lib/libfruutils.so.1
/opt/SUNWexplo/lib/locale/C/LC_MESSAGES/explorer.mo
/opt/SUNWexplo/lib/locale/C/LC_MESSAGES/explorer.po
/opt/SUNWexplo/lib/uu2b64
/opt/SUNWexplo/man/man1m/explorer.1m
/opt/SUNWexplo/man/man4/explorer.4
/opt/SUNWexplo/man/man5/explorer.5
/opt/SUNWexplo/tools/1280extended
/opt/SUNWexplo/tools/Tx000
/opt/SUNWexplo/tools/alomextended
/opt/SUNWexplo/tools/b1600extended
/opt/SUNWexplo/tools/b1600switch
/opt/SUNWexplo/tools/cluster
/opt/SUNWexplo/tools/cmdline
/opt/SUNWexplo/tools/cst
/opt/SUNWexplo/tools/disks
/opt/SUNWexplo/tools/emc
/opt/SUNWexplo/tools/etc
/opt/SUNWexplo/tools/fcal
/opt/SUNWexplo/tools/firelink
/opt/SUNWexplo/tools/fma
/opt/SUNWexplo/tools/fru
/opt/SUNWexplo/tools/hds
/opt/SUNWexplo/tools/init
/opt/SUNWexplo/tools/instinfo
/opt/SUNWexplo/tools/iplanet
/opt/SUNWexplo/tools/j2se
/opt/SUNWexplo/tools/ldap
/opt/SUNWexplo/tools/lic
/opt/SUNWexplo/tools/lp
/opt/SUNWexplo/tools/lvm
/opt/SUNWexplo/tools/messages
/opt/SUNWexplo/tools/nbu
/opt/SUNWexplo/tools/nbu_extended
/opt/SUNWexplo/tools/ndd
/opt/SUNWexplo/tools/netinfo
/opt/SUNWexplo/tools/nhas
/opt/SUNWexplo/tools/patch
/opt/SUNWexplo/tools/photon
/opt/SUNWexplo/tools/pkg
/opt/SUNWexplo/tools/proc
/opt/SUNWexplo/tools/samfs
/opt/SUNWexplo/tools/sanextended
/opt/SUNWexplo/tools/sap
/opt/SUNWexplo/tools/sbu
/opt/SUNWexplo/tools/scextended
/opt/SUNWexplo/tools/se3k
/opt/SUNWexplo/tools/se6130
/opt/SUNWexplo/tools/se6320
/opt/SUNWexplo/tools/se6920
/opt/SUNWexplo/tools/sf15k_ndd
/opt/SUNWexplo/tools/sf15k_sc
/opt/SUNWexplo/tools/smfextended
/opt/SUNWexplo/tools/sonoma
/opt/SUNWexplo/tools/srscextended
/opt/SUNWexplo/tools/ssa
/opt/SUNWexplo/tools/ssp
/opt/SUNWexplo/tools/storade
/opt/SUNWexplo/tools/storedge
/opt/SUNWexplo/tools/stortools
/opt/SUNWexplo/tools/sunone
/opt/SUNWexplo/tools/sunray
/opt/SUNWexplo/tools/sysconfig
/opt/SUNWexplo/tools/t3
/opt/SUNWexplo/tools/t3extended
/opt/SUNWexplo/tools/tape
/opt/SUNWexplo/tools/test
/opt/SUNWexplo/tools/u4ft
/opt/SUNWexplo/tools/ufsextended
/opt/SUNWexplo/tools/var
/opt/SUNWexplo/tools/vtsst
/opt/SUNWexplo/tools/vxfs
/opt/SUNWexplo/tools/vxvm
[ verifying class ]
## Executing postinstall script.
Installation of was successful.
Processing package instance from
Sun(TM) Explorer Data Collector Config Files(all) 5.2,REV=2005.08.31.01.48
Copyright 1996-2005 Sun Microsystems, Inc.
All rights reserved.
## Executing checkinstall script.
Using as the package base directory.
## Processing package information.
## Processing system information.
2 package pathnames are already properly installed.
## Verifying disk space requirements.
## Checking for conflicts with packages already installed.
## Checking for setuid/setgid programs.
This package contains scripts which will be executed with super-user
permission during the process of installing this package.
Do you want to continue with the installation of [y,n,?]
Installing Sun(TM) Explorer Data Collector Config Files as
## Installing part 1 of 1.
/etc/opt/SUNWexplo/LICENSEREADME/LICENSE.txt
/etc/opt/SUNWexplo/t3files.txt
[ verifying class ]
Modifying /etc/opt/SUNWexplo/1280input.txt
Modifying /etc/opt/SUNWexplo/alominput.txt
Modifying /etc/opt/SUNWexplo/b1600input.txt
Modifying /etc/opt/SUNWexplo/b1600switchinput.txt
Modifying /etc/opt/SUNWexplo/saninput.txt
Modifying /etc/opt/SUNWexplo/scinput.txt
Modifying /etc/opt/SUNWexplo/se6320input.txt
Modifying /etc/opt/SUNWexplo/se6920input.txt
Modifying /etc/opt/SUNWexplo/srscinput.txt
Modifying /etc/opt/SUNWexplo/t3input.txt
[ verifying class ]
## Executing postinstall script.
Installation of was successful.
Sneep Package not present - will install Version 2.5_R1.76...
Installation of was successful.
"ChassisSerialNumber" was not present in nvram .
******************************************************
* Please supply configuration information with care. *
* Especially enter the following customer details: *
* - Company Name (case sensitive) *
* - System serial number *
* - Contact Name *
* - Contact email address *
* - Address details *
* The contract ID is not vital at this stage. *
******************************************************
Press RETURN to continue...
-----
Sun Microsystems, Inc. respects your desire for privacy. Personal information
collected from this form will not be shared with organizations external to Sun
without your consent, except to process data on Sun's behalf in connection with
this transaction. We will use your personal information for communications
regarding Sun equipment and service related topics associated with the data
submitted.
Sun, as a global company, may transfer your personal information to countries
which may not provide an adequate level of protection. Sun, however, is
committed to providing a suitable & consistent level of protection for your
personal information regardless of the country in which it resides.
Completing the form below implies agreement with the above processing.
If you have any questions please refer to the Sun Privacy Policy or contact us
at
privacy@sun.com
. Note that entry of personal information into Explorer is
optional.
If you have any questions about this form or in the future wish to update or
delete any of the information provided, please contact
explorer-privacy@sun.com
-----
Absolute path name for Explorer defaults file? [/etc/opt/SUNWexplo/default/explorer]:
Company name []:
Contract ID []:
System serial number []:
Contact name []:
Contact email address []:
Phone number []:
Address (line 1) []:
Address (line 2) []:
City []:
State []:
Zip []:
Please select your geo from this list -
1) AMERICAS
2) EMEA
3) APAC
[AMERICAS]
3
APAC
Please Enter the two character Country code or enter ? for a list of countries.
[]:cn
CN China
Automatic Email Submission
Would you like all explorer output to be sent to:
explorer-database-apac@sun.com
at the completion of explorer when -mail or -e is specified?
[y,n] n
Alternate Email Addresses
Would you like explorer output to be sent to alternate email addresses at the completion of explorer? If not, enter a single "-"
only for your reply.
To enter multiple addresses, seperate them with a comma (,). []:
Return address for explorer email output []:
To receive email notification that your explorer output has been loaded into the repository,
enter the email address to send the notification to.
If notification is not wanted, enter a single "-". []:
You have answered:
Company name:
Contract ID:
System serial number:
Contact name:
Contact email address:
Phone number:
Address (line 1):
Address (line 2):
City:
State:
Zip:
Country: China
Country Code: CN
Geography: APAC
Mail output to:
Mail output from:
Mail on data load:
Are these values okay?
[y,n] y
Do you wish to schedule explorer in cron? [y,n] n
Dec 26 18:55:40 SUNS01[1542] explorer: Explorer defaults file updated.
Dec 26 18:55:40 SUNS01[1542] explorer: Please run /bin/explorer with options to collect data.
Note: /.profile was created - please check/edit this file!!!
You must log out & back in for the environment to be updated
Alternative: to test beforehand enter . /.profile
***************************************************************************
* It looks as if the system serial number is not in the explorer defaults *
* This may affect the compliancy numbers for this installation *
* *
* Please rectify this via explorer -g *
* and then use /opt/SUNWsneep/bin/sneep *
* to save the serial number into eeprom *
***************************************************************************
setup-standard completed.
# . /.profile
Sourcing //.profile-EIS.....
[email=root@SUNS01]root@SUNS01[/email]
#
[email=root@SUNS01]root@SUNS01[/email]
# cd ..
[email=root@SUNS01]root@SUNS01[/email]
# ls
install patch progs tools
[email=root@SUNS01]root@SUNS01[/email]
# cd pwd
/cdrom/eis-cd/sun
[email=root@SUNS01]root@SUNS01[/email]
# cd patch
[email=root@SUNS01]root@SUNS01[/email]
# ls
10 9 SF15K SRM SunVTS network
8 SAN SMS SUNWqus etc sds
[email=root@SUNS01]root@SUNS01[/email]
# cd 19 0
[email=root@SUNS01]root@SUNS01[/email]
# ls
10_Recommended.README 119368-02.zip 120083-01.zip
10_Recommended.tar.bz2 119370-08.zip 120101-01.zip
117447-01.zip 119374-08.zip 120135-03.zip
117463-02.zip 119412-07.zip 120196-02.zip
118346-01.zip 119470-06.zip 120198-04.zip
118348-01.zip 119534-02.zip 120199-03.zip
118375-05.zip 119538-03.zip 120201-01.zip
118557-01.zip 119542-06.zip 120222-04.zip
118564-02.zip 119555-02.zip 120251-02.zip
118707-03.zip 119574-02.zip 120284-02.zip
118708-10.zip 119685-04.zip 120460-04.zip
118711-02.zip 119687-01.zip 120471-01.zip
118712-07.zip 119712-01.zip 120473-01.zip
118735-01.zip 119783-01.zip 120627-01.zip
118777-02.zip 119826-01.zip 120661-02.zip
118830-01.zip 119828-04.zip 120732-01.zip
118842-01.zip 119850-01.zip 120741-01.zip
118918-09.zip 119900-01.zip 120753-01.zip
118945-01.zip 119906-03.zip 120824-03.zip
118981-01.zip 119908-01.zip 120845-01.zip
119012-03.zip 119963-03.zip 120849-02.zip
119042-02.zip 119981-05.zip 120986-01.zip
119073-02.zip 119986-01.zip 120990-01.zip
119143-02.zip 119992-01.zip 121008-01.zip
119145-05.zip 119994-01.zip 121010-01.zip
119213-06.zip 119996-01.zip 121236-01.zip
119252-06.zip 120009-01.zip 121265-01.zip
119278-03.zip 120030-01.zip README
119280-02.zip 120032-01.zip SPECIAL-PATCHES
119282-01.zip 120034-01.zip install_all_patches
119309-03.zip 120036-02.zip install_cluster_fast
119313-03.zip 120044-01.zip patch_order
119315-03.zip 120046-01.zip
119366-04.zip 120061-01.zip
[email=root@SUNS01]root@SUNS01[/email]
# unpack-patchs es
Are you ready to unpack patches into /tmp/10? [y/n]: y
Cleaning out /tmp/10...
Unpacking.....
Patch 117447-01
Patch 117463-02
Patch 118346-01
Patch 118348-01
Patch 118375-05
Patch 118557-01
Patch 118564-02
Patch 118707-03
Patch 118708-10
Patch 118711-02
Patch 118712-07
Patch 118735-01
Patch 118777-02
Patch 118830-01
Patch 118842-01
Patch 118918-09
Patch 118945-01
Patch 118981-01
Patch 119012-03
Patch 119042-02
Patch 119073-02
Patch 119143-02
Patch 119145-05
Patch 119213-06
Patch 119252-06
Patch 119278-03
Patch 119280-02
Patch 119282-01
Patch 119309-03
Patch 119313-03
Patch 119315-03
Patch 119366-04
Patch 119368-02
Patch 119370-08
Patch 119374-08
Patch 119412-07
Patch 119470-06
Patch 119534-02
Patch 119538-03
Patch 119542-06
Patch 119555-02
Patch 119574-02
Patch 119685-04
Patch 119687-01
Patch 119712-01
Patch 119783-01
Patch 119826-01
Patch 119828-04
Patch 119850-01
Patch 119900-01
Patch 119906-03
Patch 119908-01
Patch 119963-03
Patch 119981-05
Patch 119986-01
Patch 119992-01
Patch 119994-01
Patch 119996-01
Patch 120009-01
Patch 120030-01
Patch 120032-01
Patch 120034-01
Patch 120036-02
Patch 120044-01
Patch 120046-01
Patch 120061-01
Patch 120083-01
Patch 120101-01
Patch 120135-03
Patch 120196-02
Patch 120198-04
Patch 120199-03
Patch 120201-01
Patch 120222-04
Patch 120251-02
Patch 120284-02
Patch 120460-04
Patch 120471-01
Patch 120473-01
Patch 120627-01
Patch 120661-02
Patch 120732-01
Patch 120741-01
Patch 120753-01
Patch 120824-03
Patch 120845-01
Patch 120849-02
Patch 120986-01
Patch 120990-01
Patch 121008-01
Patch 121010-01
Patch 121236-01
Patch 121265-01
10_Recommended.tar.bz2
You should run: cd /tmp/10; ./install_all_patches
[email=root@SUNS01]root@SUNS01[/email]
#
[email=root@SUNS01]root@SUNS01[/email]
# cd /
[email=root@SUNS01]root@SUNS01[/email]
# eject
[email=root@SUNS01]root@SUNS01[/email]
# cd /tmp/10
[email=root@SUNS01]root@SUNS01[/email]
# ls
10_Recommended 119368-02 120061-01
117447-01 119370-08 120083-01
117463-02 119374-08 120101-01
118346-01 119412-07 120135-03
118348-01 119470-06 120196-02
118375-05 119534-02 120198-04
118557-01 119538-03 120199-03
118564-02 119542-06 120201-01
118707-03 119555-02 120222-04
118708-10 119574-02 120251-02
118711-02 119685-04 120284-02
118712-07 119687-01 120460-04
118735-01 119712-01 120471-01
118777-02 119783-01 120473-01
118830-01 119826-01 120627-01
118842-01 119828-04 120661-02
118918-09 119850-01 120732-01
118945-01 119900-01 120741-01
118981-01 119906-03 120753-01
119012-03 119908-01 120824-03
119042-02 119963-03 120845-01
119073-02 119981-05 120849-02
119143-02 119986-01 120986-01
119145-05 119992-01 120990-01
119213-06 119994-01 121008-01
119252-06 119996-01 121010-01
119278-03 120009-01 121236-01
119280-02 120030-01 121265-01
119282-01 120032-01 README
119309-03 120034-01 install_all_patches
119313-03 120036-02 install_patches
119315-03 120044-01 patch_order
119366-04 120046-01
[email=root@SUNS01]root@SUNS01[/email]
# ./install_allpatchs;sync;sync;init 6
./install_all_patchs: not found
[email=root@SUNS01]root@SUNS01[/email]
# ./install_svc.startd: The system is coming down. Please wait.
allsvc.startd: 69 system services are now being stopped.
Dec 26 18:58:54 SUNS01 rpcbind: rpcbind terminating on signal.
svc.startd: The system is down.
syncing file systems... done
rebooting...
Sun Blade 2500 (Silver), No Keyboard
Copyright 1998-2004 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.16.4, 6144 MB memory installed, Serial #66253227.
Ethernet address 0:3:ba:f2:f1:ab, Host ID: 83f2f1ab.
Initializing 1MB of memory at addr 133fdea000 -
Initializing 14MB of memory at addr 133f002000 -
Initializing 16MB of memory at addr 133e002000 -
Initializing 992MB of memory at addr 1300000000 /-
Initializing 1024MB of memory at addr 1200000000 /-
Initializing 1024MB of memory at addr 300000000 /-
Initializing 1024MB of memory at addr 200000000 /-
Initializing 1024MB of memory at addr 100000000 /-
Initializing 1024MB of memory at addr 0 /-
Rebooting with command: boot
Boot device: /pci@1d,700000/scsi@4/disk@0,0:a File and args:
|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-
SunOS Release 5.10 Version Generic 64-bit
Copyright 1983-2005 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/Hostname: SUNS01
checking ufs filesystems
/dev/rdsk/c0t0d0s6: is logging.
SUNS01 console login: Dec 26 19:01:26 SUNS01 sendmail[293]: My unqualified host name (SUNS01.) unknown; sleeping for retry
Dec 26 19:01:26 SUNS01 sendmail[294]: My unqualified host name (SUNS01.) unknown; sleeping for retry
SUNS01 console login: root
Password:
Dec 26 19:02:12 SUNS01 login: ROOT LOGIN /dev/console
Last login: Mon Dec 26 18:51:50 on console
Sun Microsystems Inc. SunOS 5.10 Generic January 2005
Sourcing //.profile-EIS.....
[email=root@SUNS01]root@SUNS01[/email]
#
[email=root@SUNS01]root@SUNS01[/email]
#
[email=root@SUNS01]root@SUNS01[/email]
# pwd
/
[email=root@SUNS01]root@SUNS01[/email]
# cd /cdrom
[email=root@SUNS01]root@SUNS01[/email]
# ls
cdrom0 eis-cd
[email=root@SUNS01]root@SUNS01[/email]
# cd cdrom0
[email=root@SUNS01]root@SUNS01[/email]
# ls
CONTENTS.txt DISCLAIMER.txt history.txt sun2 sun4
COPYRIGHT README-29NOV05 sun sun3
[email=root@SUNS01]root@SUNS01[/email]
# cd u sn un / /patch
[email=root@SUNS01]root@SUNS01[/email]
# ls
10 9 SF15K SRM SunVTS network
8 SAN SMS SUNWqus etc sds
[email=root@SUNS01]root@SUNS01[/email]
# cd Dec 26 19:02:26 SUNS01 sendmail[294]: unable to qualify my own domain name (SUNS01.) -- using short name
Dec 26 19:02:26 SUNS01 sendmail[293]: unable to qualify my own domain name (SUNS01.) -- using short name
Dec 26 19:02:26 SUNS01 sendmail[294]: [ID 702911 mail.alert] unable to qualify my own domain name (SUNS01.) -- using short name
Dec 26 19:02:26 SUNS01 sendmail[293]: [ID 702911 mail.alert] unable to qualify my own domain name (SUNS01.) -- using short name
10
[email=root@SUNS01]root@SUNS01[/email]
# pwd
/cdrom/eis-cd/sun/patch/10
[email=root@SUNS01]root@SUNS01[/email]
# ls
10_Recommended.README 119368-02.zip 120083-01.zip
10_Recommended.tar.bz2 119370-08.zip 120101-01.zip
117447-01.zip 119374-08.zip 120135-03.zip
117463-02.zip 119412-07.zip 120196-02.zip
118346-01.zip 119470-06.zip 120198-04.zip
118348-01.zip 119534-02.zip 120199-03.zip
118375-05.zip 119538-03.zip 120201-01.zip
118557-01.zip 119542-06.zip 120222-04.zip
118564-02.zip 119555-02.zip 120251-02.zip
118707-03.zip 119574-02.zip 120284-02.zip
118708-10.zip 119685-04.zip 120460-04.zip
118711-02.zip 119687-01.zip 120471-01.zip
118712-07.zip 119712-01.zip 120473-01.zip
118735-01.zip 119783-01.zip 120627-01.zip
118777-02.zip 119826-01.zip 120661-02.zip
118830-01.zip 119828-04.zip 120732-01.zip
118842-01.zip 119850-01.zip 120741-01.zip
118918-09.zip 119900-01.zip 120753-01.zip
118945-01.zip 119906-03.zip 120824-03.zip
118981-01.zip 119908-01.zip 120845-01.zip
119012-03.zip 119963-03.zip 120849-02.zip
119042-02.zip 119981-05.zip 120986-01.zip
119073-02.zip 119986-01.zip 120990-01.zip
119143-02.zip 119992-01.zip 121008-01.zip
119145-05.zip 119994-01.zip 121010-01.zip
119213-06.zip 119996-01.zip 121236-01.zip
119252-06.zip 120009-01.zip 121265-01.zip
119278-03.zip 120030-01.zip README
119280-02.zip 120032-01.zip SPECIAL-PATCHES
119282-01.zip 120034-01.zip install_all_patches
119309-03.zip 120036-02.zip install_cluster_fast
119313-03.zip 120044-01.zip patch_order
119315-03.zip 120046-01.zip
119366-04.zip 120061-01.zip
[email=root@SUNS01]root@SUNS01[/email]
# . unpack-patches
Are you ready to unpack patches into /tmp/10? [y/n]: y
Cleaning out /tmp/10...
Unpacking.....
Patch 117447-01
Patch 117463-02
Patch 118346-01
Patch 118348-01
Patch 118375-05
Patch 118557-01
Patch 118564-02
Patch 118707-03
Patch 118708-10
Patch 118711-02
Patch 118712-07
Patch 118735-01
Patch 118777-02
Patch 118830-01
Patch 118842-01
Patch 118918-09
Patch 118945-01
Patch 118981-01
Patch 119012-03
Patch 119042-02
Patch 119073-02
Patch 119143-02
Patch 119145-05
Patch 119213-06
Patch 119252-06
Patch 119278-03
Patch 119280-02
Patch 119282-01
Patch 119309-03
Patch 119313-03
Patch 119315-03
Patch 119366-04
Patch 119368-02
Patch 119370-08
Patch 119374-08
Patch 119412-07
Patch 119470-06
Patch 119534-02
Patch 119538-03
Patch 119542-06
Patch 119555-02
Patch 119574-02
Patch 119685-04
Patch 119687-01
Patch 119712-01
Patch 119783-01
Patch 119826-01
Patch 119828-04
Patch 119850-01
Patch 119900-01
Patch 119906-03
Patch 119908-01
Patch 119963-03
Patch 119981-05
Patch 119986-01
Patch 119992-01
Patch 119994-01
Patch 119996-01
Patch 120009-01
Patch 120030-01
Patch 120032-01
Patch 120034-01
Patch 120036-02
Patch 120044-01
Patch 120046-01
Patch 120061-01
Patch 120083-01
Patch 120101-01
Patch 120135-03
Patch 120196-02
Patch 120198-04
Patch 120199-03
Patch 120201-01
Patch 120222-04
Patch 120251-02
Patch 120284-02
Patch 120460-04
Patch 120471-01
Patch 120473-01
Patch 120627-01
Patch 120661-02
Patch 120732-01
Patch 120741-01
Patch 120753-01
Patch 120824-03
Patch 120845-01
Patch 120849-02
Patch 120986-01
Patch 120990-01
Patch 121008-01
Patch 121010-01
Patch 121236-01
Patch 121265-01
10_Recommended.tar.bz2
You should run: cd /tmp/10; ./install_all_patches
[email=root@SUNS01]root@SUNS01[/email]
# cd /
[email=root@SUNS01]root@SUNS01[/email]
# eject
[email=root@SUNS01]root@SUNS01[/email]
# cd /tmp/10
[email=root@SUNS01]root@SUNS01[/email]
# ls
10_Recommended 119368-02 120061-01
117447-01 119370-08 120083-01
117463-02 119374-08 120101-01
118346-01 119412-07 120135-03
118348-01 119470-06 120196-02
118375-05 119534-02 120198-04
118557-01 119538-03 120199-03
118564-02 119542-06 120201-01
118707-03 119555-02 120222-04
118708-10 119574-02 120251-02
118711-02 119685-04 120284-02
118712-07 119687-01 120460-04
118735-01 119712-01 120471-01
118777-02 119783-01 120473-01
118830-01 119826-01 120627-01
118842-01 119828-04 120661-02
118918-09 119850-01 120732-01
118945-01 119900-01 120741-01
118981-01 119906-03 120753-01
119012-03 119908-01 120824-03
119042-02 119963-03 120845-01
119073-02 119981-05 120849-02
119143-02 119986-01 120986-01
119145-05 119992-01 120990-01
119213-06 119994-01 121008-01
119252-06 119996-01 121010-01
119278-03 120009-01 121236-01
119280-02 120030-01 121265-01
119282-01 120032-01 README
119309-03 120034-01 install_all_patches
119313-03 120036-02 install_patches
119315-03 120044-01 patch_order
119366-04 120046-01
[email=root@SUNS01]root@SUNS01[/email]
# ./install install_all_patches;sync;sync;init 6
This script will install the following patches:
- Solaris 10 Recommended Patches
- Solaris 10 Extra Patches
ONLY if your system has a graphics display:
- You are advised not to have a graphics display active whilst patching!
- Suggestion: Exit from CDE etc. & log back in on command line!
Now the Solaris 10 Recommended Patches...
Patch cluster install script for Solaris 10 Recommended
Determining if sufficient save space exists...
Sufficient save space exists, continuing...
Installing patches located in /tmp/10/10_Recommended
Using patch_order file for patch installation sequence
Installing 120719-01...
Installing 119254-09...
Installing 120467-02...
Installing 118560-01...
Installing 119903-01...
Installing 120469-02...
Installing 119757-01...
Installing 119317-01...
Installing 118959-02...
Installing 120085-01...
Installing 119593-01...
Installing 118870-01...
Installing 120292-01...
Installing 120664-01...
Installing 120537-03...
Installing 118553-04...
Installing 117461-06...
Installing 119689-06...
Installing 118996-03...
Installing 119059-09...
Installing 119130-13...
Installing 119715-05...
Installing 119578-10...
Installing 118822-23...
Dec 26 19:09:01 SUNS01 krtld: /platform/sun4u/kernel/drv/sparcv9/trapstat: undefined symbol
Dec 26 19:09:01 SUNS01 krtld: 'page_num_user_pagesizes'
Dec 26 19:09:01 SUNS01 krtld: /platform/sun4u/kernel/drv/sparcv9/trapstat: undefined symbol
Dec 26 19:09:01 SUNS01 krtld: 'userszc_2_szc'
Dec 26 19:09:01 SUNS01 krtld: /platform/sun4u/kernel/drv/sparcv9/trapstat: undefined symbol
Dec 26 19:09:01 SUNS01 krtld: 'segkmem_alloc_permanent'
Dec 26 19:09:01 SUNS01 krtld: WARNING: mod_load: cannot load module 'trapstat'
Dec 26 19:09:01 SUNS01 krtld: /platform/sun4u/kernel/misc/sparcv9/kmdbmod: undefined symbol
Dec 26 19:09:01 SUNS01 krtld: 'kdi_tlb_page_unlock'
Dec 26 19:09:01 SUNS01 krtld: /platform/sun4u/kernel/misc/sparcv9/kmdbmod: undefined symbol
Dec 26 19:09:01 SUNS01 krtld: 'kdi_tlb_page_lock'
Dec 26 19:09:01 SUNS01 krtld: /platform/sun4u/kernel/misc/sparcv9/kmdbmod: undefined symbol
Dec 26 19:09:01 SUNS01 krtld: 'kdi_watchdog_disable'
Dec 26 19:09:01 SUNS01 krtld: /platform/sun4u/kernel/misc/sparcv9/kmdbmod: undefined symbol
Dec 26 19:09:01 SUNS01 krtld: 'kdi_watchdog_restore'
Dec 26 19:09:01 SUNS01 krtld: WARNING: mod_load: cannot load module 'kmdbmod'
Dec 26 19:09:01 SUNS01 krtld: /kernel/drv/sparcv9/kmdb: undefined symbol
Dec 26 19:09:01 SUNS01 krtld: 'kctl_modload_activate'
Dec 26 19:09:01 SUNS01 krtld: /kernel/drv/sparcv9/kmdb: undefined symbol
Dec 26 19:09:01 SUNS01 krtld: 'kctl_deactivate'
Dec 26 19:09:01 SUNS01 krtld: /kernel/drv/sparcv9/kmdb: undefined symbol
Dec 26 19:09:01 SUNS01 krtld: 'kctl_detach'
Dec 26 19:09:01 SUNS01 krtld: /kernel/drv/sparcv9/kmdb: undefined symbol
Dec 26 19:09:01 SUNS01 krtld: 'kctl_attach'
Dec 26 19:09:01 SUNS01 krtld: WARNING: mod_load: cannot load module 'kmdb'
Dec 26 19:09:01 SUNS01 krtld: WARNING: kmdb:
Dec 26 19:09:01 SUNS01 krtld: unable to resolve dependency, module 'misc/kmdbmod' not found
For more installation messages refer to the installation logfile:
/var/sadm/install_data/Solaris_10_Recommended_log
Use '/usr/bin/showrev -p' to verify installed patch-ids.
Refer to individual patch README files for more patch detail.
Rebooting the system is usually necessary after installation.
Now the Solaris 10 Extra Patches...
Patch cluster install script for Solaris 10 Extra
Determining if sufficient save space exists...
Sufficient save space exists, continuing...
Installing patches located in /tmp/10
Using patch_order file for patch installation sequence
Installing 117447-01...
Installing 117463-02...
Installing 118346-01...
Installing 118348-01...
Installing 118375-05...
Installing 118557-01...
Installing 118564-02...
Installing 118707-03...
Installing 118708-10...
Installing 118711-02...
Installing 118712-07...
Installing 118735-01...
Installing 118777-02...
Installing 118830-01...
Installing 118842-01...
Installing 118918-09...
Installing 118945-01...
Installing 118981-01...
Installing 119012-03...
Installing 119042-02...
Installing 119073-02...
Installing 119143-02...
Installing 119145-05...
Installing 119213-06...
Installing 119252-06...
Installing 119278-03...
Installing 119280-02...
Installing 119282-01...
Installing 119309-03...
Installing 119313-03...
Installing 119315-03...
Installing 119366-04...
Installing 119368-02...
Installing 119370-08...
Installing 119374-08...
Installing 119412-07...
Installing 119470-06...
Installing 119534-02...
Installing 119538-03...
Installing 119542-06...
Installing 119555-02...
Installing 119574-02...
Installing 119685-04...
Installing 119687-01...
Installing 119712-01...
Installing 119783-01...
Installing 119826-01...
Installing 119828-04...
Installing 119850-01...
Installing 119900-01...
Installing 119906-03...
Installing 119908-01...
Installing 119963-03...
Installing 119981-05...
Installing 119986-01...
Installing 119992-01...
Installing 119994-01...
Installing 119996-01...
Installing 120009-01...
Installing 120030-01...
Installing 120032-01...
Installing 120034-01...
Installing 120036-02...
Installing 120044-01...
Installing 120046-01...
Installing 120061-01...
Installing 120083-01...
Installing 120101-01...
Installing 120135-03...
Installing 120196-02...
Installing 120198-04...
Installing 120199-03...
Installing 120201-01...
Installing 120222-04...
Installation of 120222-04 failed. See the logfile for details.
Installing 120251-02...
Installing 120284-02...
Installing 120460-04...
Installing 120471-01...
Installing 120473-01...
Installing 120627-01...
Installing 120661-02...
Installing 120732-01...
Installing 120741-01...
Installing 120753-01...
Installing 120824-03...
Installation of 120824-03 failed. See the logfile for details.
Installing 120845-01...
Installing 120849-02...
Installation of 120849-02 failed. See the logfile for details.
Installing 120986-01...
Installing 120990-01...
Installing 121008-01...
Installing 121010-01...
Installing 121236-01...
Installation of 121236-01 failed. See the logfile for details.
Installing 121265-01...
Installation of 121265-01 failed. See the logfile for details.
The following patches were not able to be installed:
120222-04
120824-03
120849-02
121236-01
121265-01
For more installation messages refer to the installation logfile:
/var/sadm/install_data/Solaris_10_Extra_log
Use '/usr/bin/showrev -p' to verify installed patch-ids.
Refer to individual patch README files for more patch detail.
Rebooting the system is usually necessary after installation.
[email=root@SUNS01]root@SUNS01[/email]
# svc.startd: The system is coming down. Please wait.
svc.startd: 70 system services are now being stopped.
/platform/sun4u/kernel/misc/sparcv9/cpr: undefined symbol 'heap_lp_base'
/platform/sun4u/kernel/misc/sparcv9/cpr: undefined symbol 'heap_lp_end'
/platform/sun4u/kernel/misc/sparcv9/cpr: undefined symbol 'kcontextreg'
/platform/sun4u/kernel/misc/sparcv9/cpr: undefined symbol 'mdboot_invoke_cb'
/platform/sun4u/kernel/misc/sparcv9/cpr: undefined symbol 'heap_lp_arena'
/platform/sun4u/kernel/misc/sparcv9/cpr: undefined symbol 'segkmem_lpsize'
WARNING: mod_load: cannot load module 'cpr'
svc.startd: The system is down.
syncing file systems... done
rebooting...
Sun Blade 2500 (Silver), No Keyboard
Copyright 1998-2004 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.16.4, 6144 MB memory installed, Serial #66253227.
Ethernet address 0:3:ba:f2:f1:ab, Host ID: 83f2f1ab.
Initializing 1MB of memory at addr 133fdea000 -
Initializing 14MB of memory at addr 133f002000 -
Initializing 16MB of memory at addr 133e002000 -
Initializing 992MB of memory at addr 1300000000 /-
Initializing 1024MB of memory at addr 1200000000 /-
Initializing 1024MB of memory at addr 300000000 /-
Initializing 1024MB of memory at addr 200000000 /-
Initializing 1024MB of memory at addr 100000000 /-
Initializing 1024MB of memory at addr 0 /-
Rebooting with command: boot
Boot device: /pci@1d,700000/scsi@4/disk@0,0:a File and args:
|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|
SunOS Release 5.10 Version Generic_118822-23 64-bit
Copyright 1983-2005 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\Configuring devices.
Hostname: SUNS01
Loading smf(5) service descriptions: 1/1
checking ufs filesystems
/dev/rdsk/c0t0d0s6: is logging.
SUNS01 console login: Dec 26 19:22:16 SUNS01 sendmail[311]: My unqualified host name (SUNS01.) unknown; sleeping for retry
Dec 26 19:22:16 SUNS01 sendmail[312]: My unqualified host name (SUNS01.) unknown; sleeping for retry
Dec 26 19:23:16 SUNS01 sendmail[311]: unable to qualify my own domain name (SUNS01.) -- using short name
Dec 26 19:23:16 SUNS01 sendmail[312]: unable to qualify my own domain name (SUNS01.) -- using short name
SUNS01 console login:
SUNS01 console login:
SUNS01 console login: root
Password:
Dec 26 20:18:58 SUNS01 login: ROOT LOGIN /dev/console
Last login: Mon Dec 26 19:02:11 on console
Sun Microsystems Inc. SunOS 5.10 Generic January 2005
Sourcing //.profile-EIS.....
[email=root@SUNS01]root@SUNS01[/email]
#
[email=root@SUNS01]root@SUNS01[/email]
#
[email=root@SUNS01]root@SUNS01[/email]
#
[email=root@SUNS01]root@SUNS01[/email]
#
[email=root@SUNS01]root@SUNS01[/email]
#
[email=root@SUNS01]root@SUNS01[/email]
# pwd
/
[email=root@SUNS01]root@SUNS01[/email]
# ls
bin devices kernel net sbin var
cdrom etc lib opt system vol
data export lost+found platform tmp
dev home mnt proc usr
[email=root@SUNS01]root@SUNS01[/email]
# cd /
[email=root@SUNS01]root@SUNS01[/email]
# ua name -a
SunOS SUNS01 5.10 Generic_118822-23 sun4u sparc SUNW,Sun-Blade-2500
[email=root@SUNS01]root@SUNS01[/email]
#
[email=root@SUNS01]root@SUNS01[/email]
#
[email=root@SUNS01]root@SUNS01[/email]
# sync
[email=root@SUNS01]root@SUNS01[/email]
# sync
[email=root@SUNS01]root@SUNS01[/email]
# sync
[email=root@SUNS01]root@SUNS01[/email]
#
[email=root@SUNS01]root@SUNS01[/email]
#
[email=root@SUNS01]root@SUNS01[/email]
# init 5
[email=root@SUNS01]root@SUNS01[/email]
# svc.startd: The system is coming down. Please wait.
svc.startd: 70 system services are now being stopped.
Dec 26 20:19:19 SUNS01 rpcbind: rpcbind terminating on signal.
svc.startd: The system is down.
syncing file systems... done
Program terminated
{0}
本文来自ChinaUnix博客，如果查看原文请点：http://blog.chinaunix.net/u/9710/showart_83063.html |
|
免费注册
发表于 2006-03-09 17:44