在solaris9中安装8139网卡

can212

首先到
www.realtek.com.tw
上去下载for unix网卡驱动
按照下载下来的readme进行安装：
readme如下：
         How to install Solaris/x86 version
1. This is the version 2.1.1 RTL8139 serials driver for Solaris/x86
   version.
2. It support Speed/Duplex-Force mode, you can set it through rtls.conf file.
3. It supports 3 PCI-VID_DID cards, VID_10EC_DID_8139 for Realtek's
   native, VID_1113_DID_1211 for Accton and VID_1186_DID_1301 for
   D-Link in the install script.
4. Install method:
   
   a. Power-off your PC and insert your RTL8139 adapter.
   
   b. Boot-up you Solaris/x86 and login as "root".
   
   c. Copy the "rtls211.zip" into the temporary location in your
       hard-driver.
   
   d. UNZIP the "rtls211.zip" and you will get 3 files, "rtls", "rtls.conf" and
       "Install".
   
   e. If the PCI ID for your RTL8139 adapter is not VID_10EC_DID_8139
       or VID_1113_DID_1211 or VID_1186_DID_1301, you can modify the
       "Install" file to match your PCI ID, VID_ABCD_DID_WXYZ for example,
       modify the "pci1186,1301" to "pciABCD,WXYZ".
   
   f. Run the "Install" from File Manager to install the driver, and
       it will modify 2 files, "/etc/name_to_major" and "/etc/driver_aliases"
   
   g. You need to create the "/etc/hostname.rtls0" file and modify some
       other related files to make your networking environments working well.
   
   h. You can execute "touch /reconfigure" then "shutdown -i5 -g0", so that
       Solaris will reboot and scan changed hardware environment.
   
   i. You can execute "ifconfig -a" to make sure the RTL8139 driver is up.

然后我运行sys-unconfig命令对系统进行了重新配置。

本文来自ChinaUnix博客，如果查看原文请点：http://blog.chinaunix.net/u/17264/showart_99158.html