150开机 显示E140错误 PReP style load

zooop

150开机 显示E140错误 PReP style load

才搬回来的150 无终端显示器查看 呵呵 报这个错误

ip ping 不通  什么问题？ 系统没有安装好吗？

E140 PReP style load

Table 4-3 (Page 4 of 13). Firmware Checkpoints

E130 Build device tree See “Unresolved problems” on page 4-26
E131 Create ROOT node See “Unresolved problems” on page 4-26
E132 Create CPUs node See “Unresolved problems” on page 4-26
E133 Create L2 Cache node  See “Unresolved problems” on page 4-26
E134 Create memory  node See “Unresolved problems” on page 4-26
E135 Create memory SIMM/DIMM node See “Unresolved problems” on page 4-26
E136 Test memory See “Unresolved problems” on page 4-26
E137 Create openprom node See “Unresolved problems” on page 4-26
E138 Create options node See “Unresolved problems” on page 4-26
E139 Create aliases node and system aliases See “Unresolved problems” on page 4-26
E13A Create packages node See “Unresolved problems” on page 4-26
E140 PReP style load See “Unresolved problems” on page 4-26
E149 Create boot mgr node See “Unresolved problems” on page 4-26

4-16 7043 43P Series Service Guide




Unresolved problems: Go to MAP 1540A or 1540B for any of the following
conditions:
? A 4-digit code in the range of “E100” through “EFFF” is displayed on the operator
panel display but is not listed in Table 4-3 on page 4-13.
? A 4-digit code is displayed and is listed in Table 4-3 on page 4-13, but there are
no repair actions or FRUs listed for the code.
? All of the FRUs listed in repair actions have been replaced and the problem has
not been corrected.

4-26

prpr2025

楼上的看下150 SEVICE GUIDE MAP 1540A 有详细说明,估计是
a. System board
b. Riser card
c. Memory module
有问题,漫漫检测吧

zooop

重装系统 解决问题了

可能是拿过来的时候 系统没安装好 呵呵

yddll

这样的老机器，拍拍机箱结果可能都不一样