OVPA SOLARIS 下通讯方式

macer

HP 的OVPA产品的确是一个重量级的性能管理产品，然而在使用上可以对其通讯方式进行更改，这个在一些报表要求中可能需要订制，下面给出相应方法
安装OVPA时加入选项 –p ncs (则可以开启NCS通讯方式)

安装完毕可以改相关启动脚本，（以下示例为sun 下脚本示例）
bash-2.05# more /etc/default/ovpa
# @(#)ovpa.default    C.04.50.00
04/15/05                               =*=
###############################################################################
#
# This file contains various environment
variables which control the behavior
# of MeasureWare Agent upon start. It is
sourced by the following scripts:
#
#   
o /opt/perf/bin/ovpa            
MeasureWare Agent control script
#   
o /etc/init.d/ovpa              
MeasureWare Agent auto-start script
#
# The following are the environment and
shell variables that can be modified
# by user to change the default behavior of
MeasureWare Agent.
#
###############################################################################
# NOTICE:
#
# This file is not overwritten during a
MeasureWare Agent product update. A new
# copy of this file is left in the
/opt/perf/newconfig directory.
# All variables whith names beginning with
RPC_ are in this file for historical
# reasons and should not be uncommented.
# The user should uncomment or change the
variables, if necessary,
# in a file named /etc/default/hplwdce
###############################################################################
#
# MWA_START
#   
This file originally has MWA_START set to 1 because it is assumed
#   
that the user will edit the /var/opt/perf/parm file to suit their
#   
environment prior to system boot.
#
#   
Values:    0        Do not start MeasureWare agent at the
system boot
#               1        Start MeasureWare agent at the system
boot
#
#   
Purpose:   This variable controls
the auto-start of the MeasureWare agent
#               at the system reboot.
#
#   
Exported:  No
#
# MWA_PROTOCOL
#   
Values:    ncs     
Run MeasureWare Agent as NCS service
#               dce      Run MeasureWare Agent as DCE service
#
#   
Purpose:   Determines whether
MeasureWare Agent servers register their
#               interfaces as NCS or DCE
interfaces.
#
#   
Exported:  No
#
# MWA_START_COMMAND
#   
Values:    command string
#
#   
Purpose:   Contains a command to
be used to start MeasureWare agent at
#               the system boot. Normally set to
"mwa start".
#
#   
Exported:  No
#
# MWA_LLBD_COMMAND
#   
Values:    command string
#
#   
Purpose:   Contains the command
string to be used to start the NCS local
#               location broker deamon. The dced
daemon supplied with the
#               product is capable of emulating
NCS's local location
#               broker, therefore this is a
preferred choice upon the product
#               installation. However, users
that still wish to run genuine NCS
#               location broker daemon may
choose to set this to:
#                  
MWA_LLBD_COMMAND="/opt/perf/bin/llbd"
#               Note that this variable only
applies when MWA operates
#               in NCS mode and neither dced nor
llbd are already running.
#
#   
Exported:  No
#
# MWA_RPC_INETADDR
#   
Values:    IP address in dotted
format
#
#   
Purpose:   When MeasureWare Agent
is run in NCS mode on multi-homed
#               systems, this environment
variable defines the network
#               interface to be used for
communication with client products,
#               such as PerfView. NCS does not support
registration to
#               multiple interfaces therefore
this environment variable must
#               explicitly be set if the default
network interface is not
#               reachable by the client
products.
#
#   
Exported:  Yes
#
# ----------------------------------------------------------------------------
# The following are DCE environment
variables which affect the behavior
# of DCE runtime and DCE based servers.
Although MeasureWare Agent
# provides basic DCE runtime services as a
part of the product package,
# it will automatically detect and deploy
any existing Transarc or DASCOM DCE
# runtime installation. In such case, some
environment variables must also
# be set in the appropriate startup script
of the existing DCE product in order
# to work correctly. Such environment
variables are marked with Yes at DCE
# Runtime line. All environment variables
listed below must be exported.
#
#
# RPC_RESTRICTED_PORTS
#   
Values:    Range of valid ports
#
#   
Purpose:   Restricts the range from
which the DCE runtime selects the
#               communication ports to the
listed range. This is useful when
#               client and server must
communicate through port filtering
#               firewall. Please note that the
range must not be too small so
#               that the runtime does not run
out of resources. This
#               environment variable affects
entire DCE runtime and thus all
#               applications that use DCE. The
MeasureWare Agent services
#               require one communication port
for each registered data source
#               plus additional five ports. For
more information on firewall
#               support, please see the
Installation and Configuration Guide.
#
#   
DCE Runtime: Yes
#
# RPC_UNSUPPORTED_NETADDRS
#   
Values:    List of networks not to
be used by DCE
#
#   
Purpose:   Prevent binding DCE
services to the network addresses listed
#               in the variable string. On
multi-homed systems it is sometimes
#               desired to prevent using certain
networks for DCE based
#               services.
#
#   
DCE Runtime: YES
#
#   
SPECIAL NOTICE
#               Different DCE clients may use
the different variables to
#               exclude or include networks in
the binding list. If you are
#               not using the Lightweight DCE
runtime provided with the
#               MeasureWare Agent, you may need
to check the documentation
#               of your DCE client.
#               
# RPC_SUPPORTED_NETADDRS
#   
Values:    List of networks to be
used by DCE
#
#   
Purpose:   Enable binding DCE
services to the network addresses listed
#               in the variable string. On
multi-homed systems it is sometimes
#               desired to enable using certain
networks for DCE based
#   
          services.
#
#   
DCE Runtime: YES
#
#   
SPECIAL NOTICE
#               Different DCE clients may use
the different variables to
#               exclude or include networks in
the binding list. If you are
#               not using the Lightweight DCE
runtime provided with the
#               MeasureWare Agent, you may need
to check the documentation
#               of your DCE client.
#
# RPC_NOALIAS_NETIFS
#   
Values:    1 or unset (default)
#
#   
Purpose:   If RPC_NOALIAS_NETIFS
is set to 1 only the primary IP
#               address for each local network
interface is extracted as
#               the usable set of network
addresses for this DCE client.
#               All IP aliases for all network
interfaces are ignored.
#               This variable is automatically
set to 1 in environment
#               where the number of all IP
addresses is greater than 32.
#
#   
DCE Runtime: YES
#
#   
SPECIAL NOTICE
#               Different DCE clients may use
the different variables to
#               exclude or include networks in the binding
list. If you are
#               not using the Lightweight DCE
runtime provided with the
#               MeasureWare Agent, you may need
to check the documentation
#               of your DCE client.  
#
###############################################################################

MWA_START=1
MWA_PROTOCOL=http
MWA_START_COMMAND="/opt/perf/bin/mwa
start"
MWA_LLBD_COMMAND="/etc/init.d/hplwdce
force"

DEFAULT_HPLWDCE_FILE="/etc/default/hplwdce"
if [ -f "$DEFAULT_HPLWDCE_FILE" ]
then
  .
$DEFAULT_HPLWDCE_FILE
fi

#
#  
Replace the 127. address with the IP address of desired network
interface
#  
to direct MWA NCS mode communication through this particular network,
and
#  
uncomment the following two lines.
# MWA_RPC_INETADDR=127.0.0.1
# export MWA_RPC_INETADDR
#
#
###############################################################################
# NOTICE :
#
# All variables whith names beginning with
RPC_ are in this file for historical
# reasons and should not be uncommented.
# The user should uncomment or change the
variables, if necessary,
# in a file named /etc/default/hplwdce
###############################################################################
#
# If you want to connect to MeasureWare
Agent or PerfView Alarm Daemon
# (pvlarmd) through the port filtering
firewall, replace the below
# port range with the desired port range
and uncomment the two lines
# below. For more information on firewall
support, please see the
# MeasureWare Agent Installation and Configuration
Guide.
#
RPC_RESTRICTED_PORTS=ncadg_ip_udp[10500-10540]:ncacn_ip_tcp[10500-10540]
# export RPC_RESTRICTED_PORTS
#
#  
If you want to exclude network addresses from the DCE binding list,
replace
#  
the 127.0.0.1 below with a list of real addresses and uncomment the
#  
following two lines.
# RPC_UNSUPPORTED_NETADDRS=127.0.0.1
# export RPC_UNSUPPORTED_NETADDRS
#
#  
If you want to include network addresses to the DCE binding list,
replace
#  
the 127.0.0.1 below with a list of real addresses and uncomment the
#  
following two lines.
# RPC_SUPPORTED_NETADDRS=127.0.0.1
# export RPC_SUPPORTED_NETADDRS
#
#  
If you want to ignore DCE binding for all network interfaces, uncomment
#  
the following two lines.
# RPC_NOALIAS_NETIFS=1
# export RPC_NOALIAS_NETIFS

bash-2.05#
               
               
               

本文来自ChinaUnix博客，如果查看原文请点：http://blog.chinaunix.net/u/18055/showart_1093291.html