blade 150 无法启动

lelody

机器启动，显示如下信息：
Boot device: disk  File and args:
boot: cannot find misc/sparcv9/krtld
boot: error loading interpreter (misc/sparcv9/krtld)
Elf64 read error.
boot failed
Enter filename [/platform/sun4u/kernel/sparcv9/unix]:
网上说修改/etc/vfstab可以解决，我将vfstab贴出来，望高手指点我一下
/etc/vfstab" 13 lines, 413 characters
#device         device          mount           FS      fsck    mount   mount
#to mount       to fsck         point           type    pass    at boot options
#
#/dev/dsk/c1d0s2 /dev/rdsk/c1d0s2 /usr          ufs     1       yes     -
/proc           -               /proc           proc    -       no      -
fd              -               /dev/fd         fd      -       no      -
swap            -               /tmp            tmpfs   -       yes     -

swap - /tmp tmpfs - no -
/proc - /proc proc - no -
/devices/pci@1f,0/ide@d/sd@1,0:b - / ufs - no ro
/devices/pci@1f,0/ide@d/sd@1,0:a - /cdrom hsfs - no ro
fd - /dev/fd fd - no -

haishui

1.boot cdrom -s, then fsck the files system.
2.if the file krtld still missing. you need recover it by backup data.or copy it from other same configure server. then attempt boot again, good luck for you,

zhushuyun

原帖由 haishui 于 2008-10-10 13:39 发表
1.boot cdrom -s, then fsck the files system.
2.if the file krtld still missing. you need recover it by backup data.or copy it from other same configure server. then attempt boot again, good luck ...

这个方法不错的！！

ljhappy

fsck /dev/dsk/c*d*t*s0 -y