免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
最近访问板块 发新帖
查看: 5419 | 回复: 1

[RAID与磁盘阵列] HP存储新命令行手册 [复制链接]

论坛徽章:
0
发表于 2008-10-31 15:35 |显示全部楼层
年底了,呆着没事,整理了以前的文档,发现还有一份HP MSA2K CLI手册,发给各位兄弟,也许有用得着的时候,看看比较方便,新的命令行已经与原来的MSA1K5等有着明显的不同,比较接近EVA,不过具体没比较过,一般EVA我都用CV配了,比较懒!~~~~喔喔!~~~~~

================================================================================
abort create - Stops the create vdisk operation for a virtual disk being initialized online or offline
abort scrub - Aborts the scrub vdisk operation for specified virtual disks
abort verify - Aborts the verify vdisk operation for specified virtual disks
abort volumecopy - Aborts copying a volume
alias - Shows, creates, or deletes aliases for the current CLI session
clear cache - Clears unwritable data in both controllers' cache for a specified volume, or unneeded orphaned data for volumes that are no longer online or that no longer exist
clear disk-metadata - Clears metadata from "leftover" disk drives
clear expander-status - Note: This command should be used only by service technicians, or with the advice of a service technician
convert master-to-std - Converts a specified master volume into a standard volume
convert std-to-master - Converts a standard volume to a master volume
create host-wwn-name - Creates an entry for a host world wide port name (WWPN) and associates a nickname with the entry
create iscsi-host - iSCSI only
create master-volume - Creates a volume on a specified virtual disk, enables the volume for snapshots, and associates it with an existing snap pool
create schedule - Schedules a task to run automatically
create snap-pool - Creates a snap pool volume to use for snapshot data
create snapshots - Creates a snapshot of each specified master volume
create task - Creates a task that can be scheduled
create user - Creates a new user profile
create vdisk - Creates a virtual disk using the specified RAID level, disk drives, and optional vdisk spares
create volume - Creates a volume on a virtual disk
delete all-master-volumes - Deletes all master volumes associated with a snap pool
delete all-snapshots - Deletes all snapshots associated with a specified volume,which can be a snap pool or master volume
delete global-spare - Removes one or more disk drives from the pool of global spares
delete host-wwn-name - Deletes the nickname associated with a host world wide port name (WWPN)
delete iscsi-host - iSCSI only
delete master-volume - Deletes a master volume
delete schedule - Deletes a specified task schedule
delete snap-pool - Deletes a snap pool
delete snapshot - Deletes a snapshot volume
delete snapshot-write-data - Deletes the modified portion of a snapshot volume
delete task - Deletes a specified task
delete user - Deletes a user profile
delete vdisk - Deletes one or more virtual disks, disassociates all disk drives that are assigned to the virtual disks, and unmaps all volumes of the virtual disks from all host channels
delete vdisk-spare - Removes one or more spare disk drives that are assigned to a specified virtual disk
delete volume - Deletes a volume
exit - Log off and exit the CLI session
expand master-volume - Alias of expand volume
expand snap-pool - Expands a snap-pool volume by a specified size
expand vdisk - Adds disk drives to a virtual disk
expand volume - Expands a standard volume or snap-pool volume by a specified size
map volume - Creates a mapping whose settings override a volume's all-hosts mapping
ping - Tests communication with a remote host
rescan - This command forces rediscovery of attached disk drives and enclosures
reset host-channel-link - Issues a loop initialization primitive (LIP) from specified controllers on specified channels
reset snapshot - Deletes the data in a snapshot and resets it to the current data in the associated master volume
restart - Restarts the storage controller or management controller in either or both controller modules
restore defaults - Note: This command should only be used by service technicians, or with the advice of a service technician
rollback master-volume - Rolls back (reverts) the data on a master volume to the data that exists in a specified snapshot
scrub vdisk - For specified RAID 3, 5, 6, and 50 virtual disks, this command verifies all parity blocks
set auto-write-through-trigger - Sets the trigger conditions that cause the controller to change the cache policy from write-back to write-through
set cache-parameters - Sets cache options for a specific volume, or the cache redundancy mode for a dual-controller storage system
set cli-parameters - Sets the CLI timeout, the output characteristics of the show commands, and the way that the system handles some errors
set controller-date - Sets the date and time for each management controller and then updates the date and time for each RAID controller
set debug-log-parameters - Note: This command should only be used by service technicians, or with the advice of a service technician
set drive-parameters - Selects a global disk Self-Monitoring Analysis and Reporting Technology (SMART) setting
set expander-fault-isolation - Note: This command should be used only by service technicians, or with the advice of a service technician
set expander-phy - Note: This command should be used only by service technicians, or with the advice of a service technician
set global-spare - Designates spare disk drives that can be used by any virtual disk
set host-parameters - FC and iSCSI only
set host-port-interconnects - Enables or disables the internal connection between FC host port pairs
set host-wwn-name - Sets the nickname of an HBA entry for a host world wide port name (WWPN)
set iscsi-host - iSCSI only
set job-parameters - Sets parameters for background scrub, partner firmware upgrade, and other jobs
set led - Changes the state of drive module or enclosure LEDs to help you locate devices
set network-parameters - Sets IP values for controller module Ethernet management ports
set password - Sets a user's password for system interfaces (such as the CLI)
set prompt - Sets the prompt for the current CLI session
set protocols - Enables or disables management services and protocols
set snap-pool-policy - Sets the recovery policy that determines the action taken when a specified snap pool's error and critical threshold levels are reached
set snap-pool-threshold - Sets the percentages of snap-pool space used that trigger the warning and error threshold policies
set snmp-parameters - Configures SNMP notification of events
set system - Sets the name, contact person, location, and description for a system
set user - Changes a user's level, type, and interface access
set vdisk - Sets the name and owning controller for an existing virtual disk
set vdisk-spare - Designates spare disk drives that can be used by a specific virtual disk, and sets the disk drive status to VDISK SP
set volume - Changes the name of a volume
show auto-write-through-trigger - Shows the system's write-through trigger settings
show cache-parameters - Shows cache settings for the storage system and optionally for a specified volume
show channels - Shows information about channels on both controllers
show cli-parameters - Shows the current CLI settings
show configuration - Shows system configuration information
show controller-date - Shows the system's current date and time
show debug-log - Note: This command should only be used by service technicians,or with the advice of a service technician
show debug-log-parameters - Note: This command should only be used by service technicians, or with the advice of a service technician
show disks - Shows information about disk drives in the controller enclosure and any attached drive enclosures
show drive-parameters - Shows the SMART setting
show enclosure-status - Shows the status of system enclosures and their components
show events - Shows events for an enclosure, including events from each management controller and each RAID controller
show expander-status - Shows diagnostic information relating to SAS expander controller physical channels, known as PHY lanes
show frus - Shows information for all field-replaceable units (FRUs) in the controller enclosure and in any attached drive enclosures
show host-maps - Shows mapping information for volumes that are mapped to a specified host or to all hosts
show host-parameters - Shows information about host channels on both controllers
show host-port-interconnects - Shows the status of the internal connection between FC host port pairs
show host-wwn-names - Shows the current list of FC host world wide names (WWNs)
show inquiry - (For service techs only) Shows inquiry information for each controller module
show iscsi-hosts - iSCSI only
show job-parameters - Shows parameters for background scrub, partner firmware upgrade, and other jobs
show license - Shows whether a license key is installed and information about licensed features
show master-volumes - Shows information about master volumes associated with a specified controller or snap pool
show network-parameters - Shows the network settings for each RAID controller
show ntp-status - Shows the status of the use of Network Time Protocol (NTP) in the system
show port-wwn - FC only
show protocols - Shows which management services and protocols are enabled or disabled
show redundancy-mode - Shows the redundancy status of the system
show schedule-details - Shows information about a specified task schedule
show schedules - Shows configured task schedules
show sensor-status - Shows the status and current values reported by environmental sensors in each controller module and power module
show shutdown-status - Shows whether the RAID (storage) controllers are shut down
show snap-pools - Shows information about snap pools owned by a specified controller or both controllers
show snapshots - Shows information about snapshots for a specified controller,master volume, or snap pool
show snmp-parameters - Shows current settings for SNMP notification
show system - Shows information about the system
show task-details - Shows details of a configured task
show tasks - Shows configured tasks
show users - Shows configured user profiles
show vdisks - Shows information for all or specific virtual disks
show volume-maps - Shows mapping information for a specified volume or for all volumes
show volumecopy-status - Shows information about in-progress volume copy operations
show volumes - Shows volume information for all or specified virtual disks
shutdown - Cleanly shuts down the RAID controller in either or both controller modules
stty - Sets and shows terminal information
trust - Enables an offline virtual disk to be brought online for emergency data collection only
unmap volume - Removes an explicit mapping whose settings override a volume's all-hosts mapping
verify vdisk - For specified RAID 3, 5, 6, and 50 virtual disks, this command verifies all parity blocks
versions - Shows the hardware and software versions for each controller module
volumecopy - Copies a snapshot or a master volume to a new standard volume

论坛徽章:
0
发表于 2008-10-31 21:24 |显示全部楼层
楼主不愧是高手...
我最近也碰到这类问题。.
我也发现一个东西狠好用,推荐给大家看看...
你可以用在线备份软件给你的数据备份
它不仅能好的解决你所提到的问题,加之它本身所具有的本地和异地都可备份的功能更会让您安全简单的进行各种数据,数据库及系统的备份。
免费下载----
PC V2.0:
http://www.crsky.com/soft/13698.html
服务器 V2.0
http://www.crsky.com/soft/13699.html
同时您也会免费得到两个版本的破解版
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP