- 论坛徽章:
- 0
|
查了半天的官方文档发现写配置iscsi步骤很简单:
Configuring iSCSI ports on the storage system
Before the host can perform I/O to the iSCSI storage system, you must configure the network parameters for the storage system and host iSCSI ports.
1
In the Storage tree, right-click the icon for an iSCSI storage system and click iSCSI > Port Management.
The Port Management dialog box list all the iSCSI ports on the storage system, and when available, lists the port's IP address and the name of the initiator connected to this port
2
Select the port whose network parameters you want to enter or modify, and click Properties.
3
In the iSCSI Port Properties dialog box, for the selected port, enter the IP address, Gateway, and Subnet Mask..
Important
Consult with your Network Manager to determine the correct settings before changing MTU settings. Changing the port properties may disrupt iSCSI traffic to all ports on this SP or result in intermittent operation. Use the Connectivity Status dialog to identify and check the status of all connections to ports on this SP. Initiator configuration changes may be necessary to regain connections.
Do not enable the Require Initiator Authentication check box until you have set the network parameters for the server initiator iSCSI ports.
4
Click Apply to save the settings and return to the Port Management dialog box.
5
Repeat the process to set the network parameters for any other iSCSI SP ports.
但是我在manager中把所有的右键菜单找了一个遍也没有发现有iscsi的菜单项:em11: |
|