急需帮助！HP RX4640

阿毛~

现在有一台HP的4640，没有内置光驱，通过SCSI线接了个外置光驱，在HP-Unix系统里能够识别光驱，也能读，现在想重新装个Windows2003的系统，但是重外置光驱无法引导，在EFI下面找不到光驱，请问这是设置的为题还是无法从外置光驱的方式引导？哪位高人给说说！！

dksgqbj

Rx4640  装windows 2003   老大。。。。

          你卖不卖嘛？

bcheckrc

最近好象坛子里rx4640装2003成风啊,好几个帖子都是这个主题

a.lion

我也需要

hbh231

rx4640的机器,光驱里有系统光盘时才能在EFI shell的map命令里发现光驱的,不然是无法发现的.

rx4640我没装过IA64 2003,但我用随机的光盘时,就是按菜单直接恢复的,不需要安装的,很快就恢复完了.

双CPU,8G内存,跑2003贼快的,哈哈.

下面是2003安装方法:
-----------------------------------------------------------
Installing Microsoft Windows Advanced Server Limited Edition v1.2 with an Operating System Recovery CD-ROM Provided by the Hardware Manufacturer
If your system has USB EFI firmware and driver loaded then you should be able to navigate through the EFI Shell and to perform the installation without setting up the VT100 terminal emulator. (The VT100 terminal emulator allows you to see and navigate in the EFI Boot Manager, EFI Shell environments, and the text setup section of the OS only.)
Setting Up the Server's Video and Basic USB Input Devices
1. Insert USB keyboard in one of the server's USB connectors.
2. Insert USB mouse in the one of the server's USB connectors
3. Connect a display monitor to the server's video controller.
4. Power the server to test video and USB functions in the EFI shell environment.
5. Verify the USB keyboard is working in the EFI Shell and video can display the EFI Boot manager and EFI Shell screen then proceed to "Install the Operating System Locally".
Installing the Operating System Locally
1. Power ON the server.
2. Insert the Microsoft Windows Advanced Server Limited Edition v1.2 with Operating System Recovery CD in the CD-ROM drive of the server.
3. If the "boot from CD-ROM driver" option is set in the EFI Boot Manager, then the system should boot directly from the CD-ROM driver and start the installation progress. Go to step 11 below. If the option to boot from the CD-ROM driver is not set in the EFI Boot Manager, then go to step 4.
4. In the EFI Boot Manager, you will see: Acpi(PNP0A03,0)/Pci(2|0)/Ata(Primary,Master) EFI Shell [Built-in] Boot option maintenance menu
5. Select EFI Shell [Built-in].
6. Under the "Device mapping table" of EFI Shell, locate and select the CD-ROM device (fs0) for example: fs0 : Acpi(PNP0A03,0)/Pci(2|0)/Ata(Primary,Master)/CDROM(Entry1) blk0 : Acpi(PNP0A03,1)/Pci(1|0)/Scsi(Pun0,Lun0) blk1 : Acpi(PNP0A03,0)/Pci(2|0)/Ata(Primary,Master) blk2 : Acpi(PNP0A03,0)/Pci(2|0)/Ata(Primary,Master)/CDROM(Entry1)
7. Type fs0: then press Enter.
8. Once in fs0:\>, enter the command: CD \EFI\BOOT
9. Under FS0\EFI\BOOT:\>, locate the SETUPLDR.EFI file
10. To install the OS, enter the command: SETUPLDR.EFI
11. Once the installation process begins all you need is to monitor the process and follow the instruction on the screen.

Installing Microsoft Windows Advanced Server Limited Edition v1.2 with Microsoft's CD-ROM
If your system has the USB EFI firmware and driver loaded then you should be able to navigate through the EFI Shell and to perform the installation without setting up the VT100 terminal emulator. (The VT100 terminal emulator allows you to see and navigate in the EFI Boot Manager, EFI Shell environments, and the text setup section of the Operating System.)
Setting Up a Server's Video and Basic USB Input Devices
1. Insert USB keyboard in one of the server's USB connectors.
2. Insert USB mouse in the one of the server's USB connectors
3. Connect display monitor to the server's video controller.
4. Power the server to test video and USB functions in EFI shell environment
5. Verify that the USB keyboard is working in the EFI Shell and that the server's video controller can display the EFI Boot manager and EFI Shell screen. When done, go to the next section, "Install the Operating System Locally".

Installing the Operating System Locally
1. Power On the server.
2. Insert the Microsoft Windows Advanced Server Limited Edition v1.2 CD in the DVD drive of the server.
3. If the option to boot from the DVD driver is set in the EFI Boot Manager, then the system should boot directly from the CD-ROM driver and start the installation process. If so, proceed to step 9 below. If the option to boot from DVD driver is not set in the EFI Boot Manager, then go to step 4.
4. In the EFI Boot Manager, you will see the following options: EFI Shell [Built-in] Boot option maintenance menu Select EFI Shell [Built-in].
5. Under the "Device mapping table" of EFI Shell, locate and select the DVD device (fs0) for example: fs0 : Acpi(PNP0A03,0)/Pci(2|0)/Ata(Primary,Master)/CDROM(Entry1) blk0 : Acpi(PNP0A03,1)/Pci(1|0)/Scsi(Pun0,Lun0) blk1 : Acpi(PNP0A03,0)/Pci(2|0)/Ata(Primary,Master) blk2 : Acpi(PNP0A03,0)/Pci(2|0)/Ata(Primary,Master)/CDROM(Entry1)
6. Type fs0: and then press Enter.
7. Once in fs0:\>, enter the command: DIR
8. From fs0:\>, the file SETUPLDR.EFI and the directory EFI should be listed.
9. To install the OS, enter the command: SETUPLDR.EFI
10. Press Enter to continue at the "Setup Notification…" screen.
11. Press Enter to continue at the "Welcome to Setup…" screen.
12. When the "Windows setup can automatically configure most aspect of your ....." screen prompted you can either choose to perform EXPRESS SETUP or CUSTOM SETUP.

hbh231

最简单的方法是,在启动到Boot manager菜单的时候,直接选择boot from DVD-ROM选项安装,unix和windows都可以用这种方法安装的.

记得接好USB鼠标键盘,还有外接显示器也要接好,据说串口也可以装的,但我没搞过.

Good luck!