vsftp不能下载的问题

zer0r2y

配置如下：

1. 
   
2. # Example config file /etc/vsftpd/vsftpd.conf
   
3. #
   
4. # The default compiled in settings are fairly paranoid. This sample file
   
5. # loosens things up a bit, to make the ftp daemon more usable.
   
6. # Please see vsftpd.conf.5 for all compiled in defaults.
   
7. #
   
8. # READ THIS: This example file is NOT an exhaustive list of vsftpd options.
   
9. # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
   
10. # capabilities.
    
11. #
    
12. # Allow anonymous FTP? (Beware - allowed by default if you comment this out).
    
13. anonymous_enable=NO
    
14. #
    
15. # Uncomment this to allow local users to log in.
    
16. local_enable=YES
    
17. #
    
18. # Uncomment this to enable any form of FTP write command.
    
19. write_enable=YES
    
20. #
    
21. # Default umask for local users is 077. You may wish to change this to 022,
    
22. # if your users expect that (022 is used by most other ftpd's)
    
23. local_umask=022
    
24. #
    
25. # Uncomment this to allow the anonymous FTP user to upload files. This only
    
26. # has an effect if the above global write enable is activated. Also, you will
    
27. # obviously need to create a directory writable by the FTP user.
    
28. #anon_upload_enable=YES
    
29. #
    
30. # Uncomment this if you want the anonymous FTP user to be able to create
    
31. # new directories.
    
32. #anon_mkdir_write_enable=YES
    
33. #
    
34. # Activate directory messages - messages given to remote users when they
    
35. # go into a certain directory.
    
36. dirmessage_enable=YES
    
37. #
    
38. # Activate logging of uploads/downloads.
    
39. xferlog_enable=YES
    
40. #
    
41. # Make sure PORT transfer connections originate from port 20 (ftp-data).
    
42. connect_from_port_20=YES
    
43. #
    
44. # If you want, you can arrange for uploaded anonymous files to be owned by
    
45. # a different user. Note! Using "root" for uploaded files is not
    
46. # recommended!
    
47. #chown_uploads=YES
    
48. #chown_username=whoever
    
49. #
    
50. # You may override where the log file goes if you like. The default is shown
    
51. # below.
    
52. #xferlog_file=/var/log/vsftpd.log
    
53. #
    
54. # If you want, you can have your log file in standard ftpd xferlog format
    
55. xferlog_std_format=YES
    
56. #
    
57. # You may change the default value for timing out an idle session.
    
58. #idle_session_timeout=600
    
59. #
    
60. # You may change the default value for timing out a data connection.
    
61. #data_connection_timeout=120
    
62. #
    
63. # It is recommended that you define on your system a unique user which the
    
64. # ftp server can use as a totally isolated and unprivileged user.
    
65. #nopriv_user=ftpsecure
    
66. #
    
67. # Enable this and the server will recognise asynchronous ABOR requests. Not
    
68. # recommended for security (the code is non-trivial). Not enabling it,
    
69. # however, may confuse older FTP clients.
    
70. #async_abor_enable=YES
    
71. #
    
72. # By default the server will pretend to allow ASCII mode but in fact ignore
    
73. # the request. Turn on the below options to have the server actually do ASCII
    
74. # mangling on files when in ASCII mode.
    
75. # Beware that on some FTP servers, ASCII support allows a denial of service
    
76. # attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
    
77. # predicted this attack and has always been safe, reporting the size of the
    
78. # raw file.
    
79. # ASCII mangling is a horrible feature of the protocol.
    
80. #ascii_upload_enable=YES
    
81. #ascii_download_enable=YES
    
82. #
    
83. # You may fully customise the login banner string:
    
84. #ftpd_banner=Welcome to blah FTP service.
    
85. #
    
86. # You may specify a file of disallowed anonymous e-mail addresses. Apparently
    
87. # useful for combatting certain DoS attacks.
    
88. #deny_email_enable=YES
    
89. # (default follows)
    
90. #banned_email_file=/etc/vsftpd/banned_emails
    
91. #
    
92. # You may specify an explicit list of local users to chroot() to their home
    
93. # directory. If chroot_local_user is YES, then this list becomes a list of
    
94. # users to NOT chroot().
    
95. chroot_list_enable=YES
    
96. # (default follows)
    
97. chroot_list_file=/etc/vsftpd/chroot_list
    
98. #
    
99. # You may activate the "-R" option to the builtin ls. This is disabled by
    
100. # default to avoid remote users being able to cause excessive I/O on large
     
101. # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
     
102. # the presence of the "-R" option, so there is a strong case for enabling it.
     
103. #ls_recurse_enable=YES
     
104. #
     
105. # When "listen" directive is enabled, vsftpd runs in standalone mode and
     
106. # listens on IPv4 sockets. This directive cannot be used in conjunction
     
107. # with the listen_ipv6 directive.
     
108. listen=YES
     
109. #
     
110. # This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6
     
111. # sockets, you must run two copies of vsftpd whith two configuration files.
     
112. # Make sure, that one of the listen options is commented !!
     
113. #listen_ipv6=YES
     
114. 
     
115. pam_service_name=vsftpd
     
116. userlist_enable=YES
     
117. tcp_wrappers=YES
     
118. 
     

复制代码

登陆可以浏览，就是不能下载，请问是什么原因

飞鸿无痕

按照你的配置应该是没问题的，看下用户登录的那个目录文件的权限，以及你下载的时候本地是否有权限！对了吧你那个目录和文件的权限贴出来看看，以及你下载的时候提示的错误都贴出来！

[ 本帖最后由 飞鸿无痕 于 2009-3-26 09:55 编辑 ]