Blade 2k 启动错误

drummer0218

今天来了发现居然直接就在OK的prompt了
显示是
Boot device: disk  File and args:
FP Exception Other

init 5 了一下
OK Fast Data Access MMU Miss
OK Memory Address not Aligned
    

drummer0218

报Fast Data Access MMU Miss的话CU曾有两篇帖子，试ing
Memory Address not Aligned 的话就。。。
“Solution:

Many, many people quickly responded and most suggested reseating the SIMMs
or removing them one at a time to determine which one could be causing the
problem.  I tried reseating the only SIMM in the machine and that did not
work. So I stole a SIMM from another SPARC 4 and swapped the two.  Now the
machine boots no problem.
****************************************************
In addition to the above solution, I learned from a Sun Tactical Engineer
that this problem could be produced by the memory controller which is built
into the CPU on a SPARC 4.  The solution in that case would be to replace
the CPU.”

？？？？
这里谁出过同样的错误，怎么解决的呢

whycugb

我在前几天，15号吧，在这发了帖子，也是工作站启动不起来，有几个人回答过，对我虽然还不能解决问题，对你也许有用

名字叫: 急，在线等，工作站起不来！

drummer0218

我在看，谢谢
也不知道有没有用

drummer0218

症状不同呢~0~
现在好，死机了，昏

diag

上面不是说了吗？
So I stole a SIMM from another SPARC 4 and swapped the two. Now the
machine boots no problem.

drummer0218

你从杭州回来了啊~0~
就只有这一个解决的办法吗，我不要啊~
关于“Fast Data Access MMU Miss ”的问题，以前蜘蛛说了是个补丁的问题，现在两个问题一起出，要我按哪个的解决办法啊