免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
最近访问板块 发新帖
查看: 2309 | 回复: 6
打印 上一主题 下一主题

电源问题请教 [复制链接]

论坛徽章:
0
跳转到指定楼层
1 [收藏(0)] [报告]
发表于 2009-05-08 13:49 |只看该作者 |倒序浏览
请教各位有没有见过这样的问题,电源时好时坏,一会报警一会又不报。我换过电源线的插座,现在还是在报警。是一台N4000.下面是log
GSP> ps


PS

Power Monitor Status:
Firmware Revision : 3
System Power state: On            Power Switch      : On         
Temperature       : Normal        Selected fan state: Normal      

          Power supplies          |  Fan                          
#  State          Type           |  States        
-----------------------------------------------------------
0  Normal          Type 0         | Normal         
1  Normal          Type 0         | Normal         
2  Normal          Type 0         | Normal         
3    -                -           | Normal         
4    -                -           | Normal         
5    -                -           | Normal         
6    -                -           | Normal         
7    -                -           | Normal         


GSP Host Name:  PRD-P02
GSP> s;

Unrecognized Command : Type HE for help on the available commands

GSP Host Name:  PRD-P02
GSP> sl


SL

Select Chassis Code Buffer to be displayed:
Incoming, Activity, Error, Current boot or Last boot? (I/A/E/C/L) a
a

Set up filter options on this buffer? (Y/[N]) n
n

The first entry is the most recent Chassis Code
Type + CR and CR to go up (back in time),
Type - CR and CR to go down (forward in time),
Type Q/q CR to quit.


Log Entry #   0 :
SYSTEM NAME: PRD-P02
DATE: 05/07/2009 TIME: 17:54:22
ALERT LEVEL: 1 = Information only, no action required

SOURCE: 4 = power
SOURCE DETAIL: 4 = high voltage DC power   SOURCE ID: 0
PROBLEM DETAIL: B = functioning

CALLER ACTIVITY: 4 = monitor   STATUS: F
CALLER SUBACTIVITY: 04 = low voltage power supply
REPORTING ENTITY TYPE: 2 = power monitor   REPORTING ENTITY ID: 00

0x0020001B4400404F 00000000 00000000 type  0 = Data Field Unused
0x5820081B4400404F 00006D04 07113616 type 11 = Timestamp 05/07/2009 17:54:22
Type CR for next entry, Q CR to quit.




Log Entry #   1 :
SYSTEM NAME: PRD-P02
DATE: 05/07/2009 TIME: 17:54:15
ALERT LEVEL: 1 = Information only, no action required

SOURCE: 4 = power
SOURCE DETAIL: 4 = high voltage DC power   SOURCE ID: 0
PROBLEM DETAIL: B = functioning

CALLER ACTIVITY: 4 = monitor   STATUS: F
CALLER SUBACTIVITY: 04 = low voltage power supply
REPORTING ENTITY TYPE: 2 = power monitor   REPORTING ENTITY ID: 00

0x0020001B4400404F 00000000 00000000 type  0 = Data Field Unused
0x5820081B4400404F 00006D04 0711360F type 11 = Timestamp 05/07/2009 17:54:15
Type CR for next entry, - CR for previous entry, Q CR to quit.



Log Entry #   2 :
SYSTEM NAME: PRD-P02
DATE: 05/07/2009 TIME: 17:54:08
ALERT LEVEL: 1 = Information only, no action required

SOURCE: 4 = power
SOURCE DETAIL: 4 = high voltage DC power   SOURCE ID: 0
PROBLEM DETAIL: B = functioning

CALLER ACTIVITY: 4 = monitor   STATUS: F
CALLER SUBACTIVITY: 04 = low voltage power supply
REPORTING ENTITY TYPE: 2 = power monitor   REPORTING ENTITY ID: 00

0x0020001B4400404F 00000000 00000000 type  0 = Data Field Unused
0x5820081B4400404F 00006D04 07113608 type 11 = Timestamp 05/07/2009 17:54:08
Type CR for next entry, - CR for previous entry, Q CR to quit.
q



GSP Host Name:  PRD-P02
GSP> sl


SL

Select Chassis Code Buffer to be displayed:
Incoming, Activity, Error, Current boot or Last boot? (I/A/E/C/L) e
e

Set up filter options on this buffer? (Y/[N]) n
n

The first entry is the most recent Chassis Code
Type + CR and CR to go up (back in time),
Type - CR and CR to go down (forward in time),
Type Q/q CR to quit.


Log Entry #   0 :
SYSTEM NAME: PRD-P02
DATE: 05/07/2009 TIME: 17:42:09
ALERT LEVEL: 6 = Boot possible, pending failure - action required

SOURCE: 4 = power
SOURCE DETAIL: 1 = AC mains   SOURCE ID: FF
PROBLEM DETAIL: 9 = power off

CALLER ACTIVITY: 4 = monitor   STATUS: F
CALLER SUBACTIVITY: 04 = low voltage power supply
REPORTING ENTITY TYPE: 2 = power monitor   REPORTING ENTITY ID: 00

0x0020006941FF404F 00000000 00000000 type  0 = Data Field Unused
0x5820086941FF404F 00006D04 07112A09 type 11 = Timestamp 05/07/2009 17:42:09
Type CR for next entry, Q CR to quit.



Log Entry #   1 :
SYSTEM NAME: PRD-P02
DATE: 05/07/2009 TIME: 17:41:10
ALERT LEVEL: 6 = Boot possible, pending failure - action required

SOURCE: 4 = power
SOURCE DETAIL: 1 = AC mains   SOURCE ID: FF
PROBLEM DETAIL: 9 = power off

CALLER ACTIVITY: 4 = monitor   STATUS: F
CALLER SUBACTIVITY: 04 = low voltage power supply
REPORTING ENTITY TYPE: 2 = power monitor   REPORTING ENTITY ID: 00

0x0020006941FF404F 00000000 00000000 type  0 = Data Field Unused
0x5820086941FF404F 00006D04 0711290A type 11 = Timestamp 05/07/2009 17:41:10
Type CR for next entry, - CR for previous entry, Q CR to quit.



Log Entry #   2 :
SYSTEM NAME: PRD-P02
DATE: 05/07/2009 TIME: 17:34:12
ALERT LEVEL: 6 = Boot possible, pending failure - action required

SOURCE: 4 = power
SOURCE DETAIL: 4 = high voltage DC power   SOURCE ID: 0
PROBLEM DETAIL: A = failed or disconnected

CALLER ACTIVITY: 4 = monitor   STATUS: F
CALLER SUBACTIVITY: 04 = low voltage power supply
REPORTING ENTITY TYPE: 2 = power monitor   REPORTING ENTITY ID: 00

0x0020006A4400404F 00000000 00000000 type  0 = Data Field Unused
0x5820086A4400404F 00006D04 0711220C type 11 = Timestamp 05/07/2009 17:34:12
Type CR for next entry, - CR for previous entry, Q CR to quit.

论坛徽章:
0
2 [报告]
发表于 2009-05-08 21:06 |只看该作者
是不是电压不稳啊?
用了UPS吗?

论坛徽章:
0
3 [报告]
发表于 2009-05-09 00:25 |只看该作者
原帖由 五“宅”一生 于 2009-5-8 21:06 发表
是不是电压不稳啊?
用了UPS吗?

电源线更换过,使用了UPS。

论坛徽章:
0
4 [报告]
发表于 2009-05-09 22:09 |只看该作者
再观察观察吧。时好时坏的。
没准是接触不良啊。

论坛徽章:
0
5 [报告]
发表于 2009-05-11 14:09 |只看该作者
别听楼上的扯。
自己用手摸已摸,是不是电源的风扇坏了,无法散热。
我以前就碰到过这种情况,风扇坏了,不能散热,电源就停了。等它冷下来,又好了。然后再热,又停。
和LZ说的情况一样。

接触不良表现不是这样的。

论坛徽章:
0
6 [报告]
发表于 2009-05-11 14:53 |只看该作者
原帖由 sunraychuang 于 2009-5-11 14:09 发表
别听楼上的扯。
自己用手摸已摸,是不是电源的风扇坏了,无法散热。
我以前就碰到过这种情况,风扇坏了,不能散热,电源就停了。等它冷下来,又好了。然后再热,又停。
和LZ说的情况一样。

接触不良表现不 ...

有可能是这样的,机器目前的状态是,如果系统的attention灯亮的话,是黄灯在慢闪,不知道各位见过慢闪的没,然后有时会听到“吱吱”的声音,但从前侧看,电源的绿灯是亮的。我估计是电源有问题了,申请了个电源,晚上换下吧,看结果会是怎么样的。谢谢各位。

论坛徽章:
0
7 [报告]
发表于 2009-05-11 20:42 |只看该作者
原帖由 sunraychuang 于 2009-5-11 14:09 发表
别听楼上的扯。
自己用手摸已摸,是不是电源的风扇坏了,无法散热。
我以前就碰到过这种情况,风扇坏了,不能散热,电源就停了。等它冷下来,又好了。然后再热,又停。
和LZ说的情况一样。

接触不良表现不 ...



就你明白?你不也是说个半吊子么。我扯不扯管你毛事。用不着你来评价老子!

风扇不转都看不出来的话还搞个P的排错啊。以为遇到个风扇不转你就是专家了??

这年头,有些人说话怎么就那么没有素质。。
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP