- 论坛徽章:
- 0
|
本帖最后由 james_lx 于 2010-02-25 13:47 编辑
一个va7400存储, 现在报警说再坏一个盘就会出崩溃了,rebuild失败,hotspare也没顶上去,
现在没有36GFC盘的配件,只有18G和73G的配件,怎么办呢?? 附件是armdsp的log
谢谢大家
i have a new 18G-FC disk and two new 73G-FC disk in hosthouse,
but i have not 36G-disk, please tell me ,What can I do?
thanks a lot
va7400-02-25.rar
(4.45 KB, 下载次数: 30)
---------------------------------------------------------------
aes04p63[/#]armdsp -a va7400
Total Disk Enclosures:________________3
Redundancy Group:_____________________1
Total Disks:________________________20
Total Physical Size:________________1.075 TB
Allocated to Regular LUNs:__________853.732 GB
Allocated as Business Copies:_______0 bytes
Used as Active Hot Spare:___________66.753 GB
Used for Redundancy:________________181.007 GB
Unallocated (Available for LUNs):___0 bytes
Redundancy Group:_____________________2
Total Disks:________________________18
Total Physical Size:________________851.154 GB
Allocated to Regular LUNs:__________597.385 GB
Allocated as Business Copies:_______0 bytes
Used as Active Hot Spare:___________66.753 GB
Used for Redundancy:________________180.402 GB
Unallocated (Available for LUNs):___6.612 GB
SUB-SYSTEM SETTINGS
RAID Level:___________________________HPAutoRAID
Auto Format Drive:____________________On
Hang Detection:_______________________On
Capacity Depletion Threshold:_________100%
Queue Full Threshold Maximum:_________4096
Enable Optimize Policy:_______________True
Enable Manual Override:_______________False
Manual Override Destination:__________False
Read Cache Disable:___________________False
Rebuild Priority:_____________________High
Security Enabled:_____________________False
Shutdown Completion:__________________0
Subsystem Type ID:____________________1
Unit Attention:_______________________True
Volume Set Partition (VSpart):________False
Write Cache Enable:___________________True
Write Working Set Interval:___________8640
Enable Prefetch:______________________True
Disable Secondary Path Presentation:__False
RESILIENCY SETTINGS
Simplified Resiliency Setting:________Normal Performance (Default)
Enable Secure Mode:___________________True
Disable NVRAM on UPS Absent:__________False
Disable NVRAM on WCE False:___________False
Disable Read Hits:____________________False
Force Unit Access Response:___________1
Lock Write Cache On:__________________True
Performance Goal Configuration:_______Normal Performance
Resiliency Threshold:_________________4
Single Controller Warning:____________True
DISK SETTINGS
Auto Include:_________________________On
Auto Rebuild:_________________________On
Hot Spare:____________________________LargestDisk
Max Drives per Loop Pair:_____________105
Max Drives per Subsystem:_____________105
ENCLOSURE SETTINGS
Max Enclosures per Loop Pair:_________6
Max Enclosures per Subsystem:_________6
LUN SETTINGS
LUN Creation Limit:___________________1024
Maximum LUN Creation Limit:___________1024
Migrating Write Destination:__________False
SCRUB SETTINGS
Scrub Restart Period:_________________7190 minutes
Scrub State:__________________________Not running, system in warning state
OPERATIONS IN PROGRESS
The array is BALANCING.
WARNINGS
WARNING: The batteries that backup NVRAM in the array controllers have been de
pleted to the point where removing power from the controller may cause data loss
.
WARNING: Unallocated capacity has fallen below the threshold specified by the
capacity threshold mode parameter.
WARNING: One or more member drives are missing.
WARNING: A rebuild operation failed.
WARNING: Some data in the device lacks redundancy, and is exposed to becoming
unavailable if further drive removals or failures occur. |
|
免费注册
发表于 2010-02-25 13:45
