怪了?(请各位版主及大侠看看)

400up

我们公司的一台820,装了一个DOMINO5.08,主要是跑OA的,用户大概在350人左右.采用的备份是每天定时备份,用命令addjobscde增加了三条日志信息:strdomsvr;backup;enddomsvr.
    现在出了个怪问题,domino在每个星期二早上总是没有自动起来,看了日志是由于星期一晚上的备份没有做成功既 backup出错,用dspmsg命令查看发现:job 011576/qsecofr/backup/ended abnormally.   用dsplog命令查看发现:  device tap01  cannot  process  loaded volume  (c  r   inz)在该log前打F1 ,显示:     
     cause:.....  one of  the following occurred:
                  -  - the volume being processed for file qsystap in library qsys cannot be read
                 -   -the volume loaded on device tap01 cannot be processed,beacuse the format or density is not valid.
                -   -the tape may not have an ibm--standard labaled sequence if the volume is a 1/4 inch cartridge tape or an 8 millimeter  cartridge tape,an the cartridge was created on a system other than an as/400 system
              -  -the tape may contain data  which was compacted and device tap01 can not read compacted data if the device is a 1/2inch cartridge tape device.
              - -the operator loaded a different volume during file processing.
             - - the tape device needs to be cleaning.
            -  - the tape volume is damaged.
             - - a hardware error occurred.
     For more infortmation,refer to the tapeand disktte device programming book, sc41 5716

我们做的备份是备份DOMINO下的整个DATA目录,磁带是16-32G的,  不知道是什么原因造成DOMINO的不正常起???

400up

有2个星期了 ,磁带不大可能坏,因为我把这盘磁带重新格式化后,用SAVE命令做备份,数据都成功做到磁带上的

400up

有2个星期了 ,磁带不大可能坏,因为我把这盘磁带重新格式化后,用SAVE命令做备份,数据都成功做到磁带上的

400up

没人帮我吗

michael9406

主题不清。