- 论坛徽章:
- 0
|
Alpha Server 4100 安装报告
1. 安装步骤:
1) 把硬件平台搭好,开机,自检通过.
2) 在CONSOLE MODE P000>;>;>; show dev
查看CDROM的设备文件名,例如RRD46,其对应的文件名为dkc400,然后从光盘启动P000>;>;>; b dkc400
3) 出现图形化安装界面,选择 CUSTOM (用户自定义安装), 输入主机名,密码,修改当前时间 (mm-dd-yyyy) , 选中所在国家代码 (PRC), 然后在硬盘分区表中选中高级文件系统(ADVFS),点击 partition 选项, 其中root分区放在 a 区, swap 放在 b 区( 大小为内存大小的两到三倍), /usr 放在 g 区, /u (用户定义)放在 h 区. 其中每个分区大小详见配置文档.
4) 点击software 选项,选择 Add All option,添加所有软件子集,然后选择OK,返回图形化安装界面.
5) 点击 Set Up Done 选项, 开始操作系统的安装,大约45-120分钟.
6) 安装完操作系统,输入License.在超级用户状态下, # lmfsetup ,然后根据提供的LICENSE 文档,逐个输入,输入完后,按回车 结束 License 的录入.检查 License 的安装状态, # /usr/adm/lmf/lmf -->; lmf>; list 检查所录入的 License. 以上的操作也可以通过图形界面安装.
# lmfsetup
Register PAK (type q or quit to exit) [template]
Issuer :
Authorization Number :
Product Name :
Producer :
Number of units :
Version :
Product Release Date :
Key Termination Date :
Availability Table Code :
Activity Table Code :
Key Options :
Product Token :
Hardware-Id :
Checksum :
7) 录入完 License ,开始配置网络. 在超级用户状态下, # netsetup , 或者 # netconfig 根据系统提示输入 IP 地址, 子网掩码 (Submask) :
# netconfig -ui menu
Main Menu
1 Network Interfaces
2 Daemons
3 Configuration Files
4 Static Routes
0 Exit
Enter the number of your choice: 1
You will now be asked a series of questions about the system.
Default answers are shown in square brackets ([]). To use a
default answer, press the RETURN key.
This machine contains the following network interfaces:
tu0
Enter the interface name. If you are finished, press the RETURN key.
Valid choices are:
tu0 tu1
Enter your choice: tu0
This interface is not configured. You can configure or display the interface. If you are finished, press the return key.
Valid choices are:
configure display
Enter your choice: configure
Do you want your system to be a Dynamic Host Configuration
Protocol (DHCP) client [n]? n
Enter the host name [dbs1]: dbs1
The Internet Protocol (IP) address consists of four integers separated by '.'. Each integer must be less than or equal to 255.
An example IP address is: 130.180.3.12
Enter the IP address: 1.1.1.1
The subnet mask is of the form 255.n.n.n where each 'n' is a number less than or equal to 255.
Enter the network mask [255.0.0.0]: 255.255.255.0
The interface flags are:
ipdst =
metric =
allmulti = no
promisc = no
alias =
mtu = 1500
arp = yes
debug = no
Enter the flags when prompted.
If you are finished, press the RETURN key.
Enter the flag name
Valid choices are:
ipdst alias mtu metric arp promisc allmulti debug
Enter your choice: <CR>;
The interface configuration is:
state = down
arp = yes
allmulti = no
mtu = 1500
configured = yes
host = dbs1
debug = no
dhcp = no
device = tu0
running = no
netmask = 255.255.255.0
promisc = no
address = 1.1.1.1
Is this correct [y]? y
Do you want to start network services on this system [n]? y
The interface is configured.
This machine contains the following network interfaces:
tu0 tu1
Enter the interface name. If you are finished, press the RETURN key.
Valid choices are:
tu0 tu1
Enter your choice: <CR>;
Main Menu
1 Network Interfaces
2 Daemons
3 Configuration Files
4 Static Routes
0 Exit
Enter the number of your choice: 2
Daemons Menu
1 Routed
2 Gated
3 Joind
4 Rwhod
0 Exit
Enter the number of your choice: 2
The gated daemon manages the network routing tables for the RIP, BGP, EGP, HELLO, and OSPF routing protocols.
gated is disabled, do you want to enable it [y]? y
The gated flags are:
configfile = /etc/gated.conf
tracefile =
Enter the flags when prompted.
If you are finished, press the RETURN key.
Enter the flag name
Valid choices are:
tracefile configfile
Enter your choice: <CR>;
The daemon is enabled.
gated is not running, do you want to start it [n]? y
The daemon is started.
Daemons Menu
1 Routed
2 Gated
3 Joind
4 Rwhod
0 Exit
Enter the number of your choice: 0
Main Menu
1 Network Interfaces
2 Daemons
3 Configuration Files
4 Static Routes
5 IP Router
0 Exit
Enter the number of your choice: 0
The network is running on this system, do you want to restart it [n]? n
Verify that you can ping the network interface on your node, but not the other node of this cluster. For example, assume you are on the node "dbs1":
# ping dbs1(checks your loop back interface and verifies that daemons are running)
PING dbs1 (1.1.1.1): 56 data bytes
64 bytes from 1.1.1.1: icmp_seq=0 ttl=64 time=1 ms
64 bytes from 1.1.1.1: icmp_seq=1 ttl=64 time=0 ms
64 bytes from 1.1.1.1: icmp_seq=2 ttl=64 time=0 ms
<CTRL/C>; to exit
# ping dbs2
ping: unknown host as2
In order to ping the other node at this point you must use the TCP/IP address. For example:
# ping 1.1.1.2
PING 1.1.1.2 (1.1.1.2): 56 data bytes
64 bytes from 1.1.1.2: icmp_seq=0 ttl=64 time=1 ms
64 bytes from 1.1.1.2: icmp_seq=1 ttl=64 time=0 ms
<CTRL/C>; to exit
修改 dbs1 , dbs2 的 /etc/hosts 把对方的 IP 地址和子网掩码加入文件中.
修改 /etc/hosts, /etc/ftpusers 屏蔽 root 用户
# vi /etc/ftpusers
# root
uucp
修改 /etc/securettys : 在文件尾加入 ptys 选项.
# vi /etc/securettys
0
0
ptys
 配置 TruCluster 1.6.0 . 安装所需七个子集:
# cd /kits/TruCluster/kit
# setld -l .
*** Enter subset selections ***
The following subsets are mandatory and will be installed automatically
unless you choose to exit without installing any subsets:
* TruCluster Available Server Software
* TruCluster Common Components
* TruCluster Configuration Software
* TruCluster MEMORY CHANNEL(TM) Software
* TruCluster Production Server Software
The subsets listed below are optional:
There may be more optional subsets than can be presented on a single
screen. If this is the case, you can choose subsets screen by screen
or all at once on the last screen. All of the choices you make will
be collected for your confirmation before any subsets are installed.
- TruCluster(TM) Software:
1) TruCluster Cluster Monitor
2) TruCluster Reference Pages
Or you may choose one of the following options:
3) ALL mandatory and all optional subsets
4) MANDATORY subsets only
5) CANCEL selections and redisplay menus
6) EXIT without installing any subsets
Enter your choices or press RETURN to redisplay menus.
Choices (for example, 1 2 4-6): 3
You are installing the following mandatory subsets:
TruCluster Available Server Software
TruCluster Common Components
TruCluster Configuration Software
TruCluster MEMORY CHANNEL(TM) Software
TruCluster Production Server Software
You are installing the following optional subsets:
- TruCluster(TM) Software:
TruCluster Cluster Monitor
TruCluster Reference Pages
Is this correct? (y/n): y
Checking file system space required to install selected subsets:
File system space checked OK.
7 subset(s) will be installed.
Loading 1 of 7 subset(s)....
TruCluster Common Components
Copying from . (disk)
Verifying
Loading 2 of 7 subset(s)....
TruCluster Available Server Software
Copying from . (disk)
Verifying
Loading 3 of 7 subset(s)....
TruCluster MEMORY CHANNEL(TM) Software
Copying from . (disk)
Verifying
Loading 4 of 7 subset(s)....
TruCluster Production Server Software
Copying from . (disk)
Verifying
Loading 5 of 7 subset(s)....
TruCluster Cluster Monitor
Copying from . (disk)
Verifying
Loading 6 of 7 subset(s)....
TruCluster Reference Pages
Copying from . (disk)
Verifying
Loading 7 of 7 subset(s)....
TruCluster Configuration Software
Copying from . (disk)
Verifying
7 of 7 subset(s) installed successfully.
Configuring "TruCluster Common Components " (TCRCOMMON160)
Configuring "TruCluster Available Server Software" (TCRASE160)
Configuring "TruCluster MEMORY CHANNEL(TM) Software" (TCRMCA160)
Configuring "TruCluster Production Server Software" (TCRDSVC160)
Configuring "TruCluster Cluster Monitor " (TCRCMS160)
Configuring "TruCluster Reference Pages " (TCRMAN160)
Configuring "TruCluster Configuration Software " (TCRCONF160)
Enter the IP name for the cluster interconnect: MC1
You chose "MC1," IP 10.0.0.1 using interface mc0
Is this correct? [y]: y
Will the system be in an ASE? [y]: y
You must now enter an ASE identifier (ASE_ID) for this node. All nodes
Within the same ASE must use the same ASE_ID. Each separate ASE must have
its own unique ASE_ID. The range of valid ASE_ID numbers is 0 to 63,
inclusive.
Enter the ASE_ID number [0]: 1
Do you want to run the ASE logger on this node? [n]: y
Choose an installation procedure:
TruCluster Production Server (ASE) Installation Menu
f) Setting up an ASE for the first time
r) Performing a rolling upgrade
s) Performing a simultaneous upgrade
e) Adding to an ASE with a V1.6 operating version
p) Adding to an ASE with a V1.5 operating version
?) Help
Enter your choice [f]: f
Initializing a new ASE V1.6 database ...
The kernel will now be configured using "doconfig".
Enter the name of the kernel configuration file. [DBS1]: <CR>;
*** KERNEL CONFIGURATION AND BUILD PROCEDURE ***
Saving /sys/conf/dbs1 as /sys/conf/DBS1.bck
Do you want to edit the configuration file? (y/n) [n]: <CR>;
*** PERFORMING KERNEL BUILD ***
The ASE I/O Bus Renumbering Tool has been invoke
Select the controllers that define the shared ASE I/O buses.
Name Controller Slot Bus Slot
0) scsi0 isp0 0 pci2000 0
1) scsi1 isp1 0 pci0 11
q) Quit without making changes
Enter your choices (comma or space separated): q
No changes made
*** PERFORMING KERNEL BUILD ***
Working....Thu Aug 26 15:52:57 CDT 1999
The new kernel is /sys/DSB1/vmunix
The kernel build was successful. Please perform the following actions:
o Move the new kernel to /.
o Before rebooting make sure that the cluster interconnect IP
addresses for all cluster members are recorded in each member's
/etc/hosts file.
o Reboot the system.
TruCluster 1.6 分别在两台主机安装. 修改 /etc/hosts 文件,把两台主机的内存通道 IP 地址加入.
9) 安装 Patch : 进入单用户状态 # init S ---->; # mount -a
# cd /usr/patch_kit
# ./dupatch
Enter path to the patch kit (the directory containing ./kit and ./doc),
or enter "q" to get back to the menu: .(this is the "." character)
* A new version of patch tools required for patch management
is now being installed on your system.
* Tools updated, invoking the updated Patch Utility...
DIGITAL UNIX Patch Utility (Rev. 25-10)
==========================
- This dupatch session is logged in //var/adm/patch/log/session.log
Main Menu:
---------
1) Patch Installation
2) Patch Deletion
3) Patch Documentation
4) Patch Tracking
5) Patch Baseline Analysis/Adjustment
h) Help on Command Line Interface
q) Quit
Enter your choice: 1
DIGITAL UNIX Patch Utility (Rev. 25-10)
==========================
- This dupatch session is logged in //var/adm/patch/log/session.log
Patch Installation Menu:
-----------------------
1) Pre-Installation Check ONLY
2) Check & Install (requires single-user mode)
b) Back to Main Menu
q) Quit
Enter your choice: 2
The products listed below are optional:
There may be more optional products than can be presented on a single
screen. If this is the case, you can choose products screen by screen
or all at once on the last screen. All of the choices you make will
be collected for your confirmation before any products are installed.
1) Patches for Digital UNIX V4.0F
2) Patches for TruCluster Available Server Software V1.6
Or you may choose one of the following options:
3) ALL of the above
4) CANCEL selections and redisplay menus
5) EXIT without installing any products
Enter your choices or press RETURN to redisplay menus.
Choices (for example, 1 2 4-6): 3
You are installing patches (to be selected) from the following products:
Patches for Digital UNIX V4.0F
Patches for TruCluster Available Server Software V1.6
Is this correct? (y/n): y
Gathering patch information...
(depending upon the size of the patch kit, this may take a while)
*** Start of Special Instructions ***
*** There are NO Special Instructions ***
Press RETURN to proceed...
-----------------------------------------------------------------------
To Make Patches Reversible - PLEASE READ THE FOLLOWING INFORMATION:
- You have the option to make the patches reversible so you can
revert the system to its state prior to the installation of a patch.
- Reversibility is achieved by compressing and saving a copy of the
files being replaced by the patches. These files would be restored
to the system if you choose to delete a patch.
- If you choose to make patches NON-reversible, then the system cannot
be restored to the state prior to the installation of a patch; you
will not be able to delete the patches later.
- This patch kit may force a small set of patches to be reversible to
ensure your upgrades to future versions of DIGITAL UNIX are successful.
The Patch Utility will make those patches reversible automatically.
Refer to the Release Notes / Installation Instructions provided with
this patch kit.
Do you want the patches to be reversible? [y]: y
By default, the backup copies of the installed patches will be saved in
"//var/adm/patch/backup".
If you have limited space in /var, you may want to make the backup
directory the mount point for a separate disk partition, an NFS mounted
directory, or a symbolic link to another file system.
You must ensure the backup directory is configured the same way during
any patch removal operations.
Your current setup of "//var/adm/patch/backup" is:
* A plain directory (not a mount point or a symbolic link)
Do you want to proceed with the installation with this setup? [y]: y
Your name: System Administrator
Enter any notes about this operation that you would like stored for
future reference (To end your input, enter a "." :
: .
KITNAME>;<DUV40FAS0001-19990609>; OSF440, TCR160
The patches listed below are optional:
There may be more optional patches than can be presented on a single
screen. If this is the case, you can choose patches screen by screen
or all at once on the last screen. All of the choices you make will
be collected for your confirmation before any patches are installed.
- DIGITAL_UNIX_V4.0F / Commands, Shells, & Utility Patches:
1) Patch 0019.00 - Fix For yacc
2) Patch 0020.00 - Cannot Use ipcs Cmd On System Not Booted With vmunix
3) Patch 0025.00 - Fix For ksh, file, tail, nawk, awk, And pax
4) Patch 0026.00 - Fix For defragment -V Option
5) Patch 0032.00 - mkdir -p Not Returning Error
6) Patch 0036.00 - volrootmir -a Cmd Fails
7) Patch 0037.00 - volrecover Not Returning Failed Status Code
Patch 0038.00 - quotaon Returns Incorrect Error Status
9) Patch 0040.00 - binmail Delivers Only Partial Messages
10) Patch 0041.00 - Fix For nroff Y2K Problem
11) Patch 0042.00 - Fixes For vrestore Command
12) Patch 0045.00 - Fix For sort -i Abort Problem
13) Patch 0047.00 - vi Puts Server Port INTO PASSALL MODE
14) Patch 0061.00 - Enhancement For makedepend Utility
15) Patch 0067.00 - mount Cmd Sometimes Kills Other Processes
16) Patch 0068.00 - nroff Incorrectly Translates Years After 1999
- DIGITAL_UNIX_V4.0F / Common Desktop Environment (CDE) Patches:
17) Patch 0005.00 - dtfile May Leave Defunct Processes
- DIGITAL_UNIX_V4.0F / Filesystem Patches:
1 Patch 0035.00 - Enhancement For verify Utility
19) Patch 0039.00 - System Panic When Accessing ISO9660 Format CDROM
20) Patch 0054.00 - AdvFS volumes Not Setting I/O Byte Transfer Size
21) Patch 0075.00 - chvol Read & Write Transfer Size Increased
- DIGITAL_UNIX_V4.0F / Hardware Configuration Patches:
22) Patch 0018.00 - Resolves Corrupt EV6 Binary Error Log Entries
23) Patch 0072.00 - Updates FORE ATM (lfa) driver to Rev. V1.0.14
- DIGITAL_UNIX_V4.0F / I/O Device Handling Patches:
24) Patch 0053.00 - Fix For spo_process_rsp Panic
25) Patch 0056.00 - KZPCA Host Bus Adapter May Hang
26) Patch 0058.00 - Additional Error Detection for FC Driver
27) Patch 0060.00 - Fix For spo_misc_errors errlog Entries
2 Patch 0073.00 - Problems With Driver Support For ELSA Gloria Synergy
- DIGITAL_UNIX_V4.0F / Kernel Patches:
29) Patch 0016.00 - Fixes Kernel Memory Fault Caused By SMP Race
30) Patch 0034.00 - Fix For kio Subsystem Panic
31) Patch 0044.00 - Fix For Kernel Memory Fault
32) Patch 0055.00 - New Functionality To Detect Unlinked Reference Files
- DIGITAL_UNIX_V4.0F / Library Patches:
33) Patch 0046.00 - Shared Library Fix For curses-based Applications
34) Patch 0048.00 - DECthreads Library Fix
35) Patch 0069.00 - Static Library Fix For curses-based Applications
36) Patch 0071.00 - Ladebug Enhancements
- DIGITAL_UNIX_V4.0F / Network Patches:
37) Patch 0008.00 - Fix For POP Mail Handler
3 Patch 0017.00 - Fix For BIND Server
39) Patch 0021.00 - Fix For XTI And DECnet/OSI
40) Patch 0022.00 - automount Daemon Hangs
41) Patch 0043.00 - Fix For XTI Over TCP/IP
42) Patch 0057.00 - Fixes Several NFS Problems
43) Patch 0059.00 - Characters Randomly Repeated Using tip
44) Patch 0066.00 - libxti/libtli Static Library Fix
- DIGITAL_UNIX_V4.0F / Security Related Patches:
45) Patch 0002.00 - Security (SSRT0571U)
46) Patch 0003.00 - Security (SSRT0585U)
47) Patch 0004.00 - Security (SSRT0580U)
4 Patch 0006.00 - Security (SSRT0600U)
49) Patch 0011.00 - Security (SSRT0596U)
50) Patch 0012.00 - Security (SSRT0567U)
51) Patch 0028.00 - Security (SSRT0556U)
52) Patch 0031.00 - Security (SSRT0563U)
- DIGITAL_UNIX_V4.0F / X11 Patches:
53) Patch 0007.00 - dxcalendar Reminder Displays Through dxpause Screen
54) Patch 0062.00 - Fix For Motif Drag-and-Drop
55) Patch 0063.00 - xfs Fails With Segmentation Fault
56) Patch 0070.00 - libXm Static Library Fix For Motif Drag-and-Drop
57) Patch 0074.00 - Fix For ELSA Gloria Synergy Graphics Board
- TruCluster_V1.6 / ASE Availability Manager (AM) Patches:
5 Patch 0002.00 - Fix For asedirector
59) Patch 0003.00 - DRD Permissions May Be Lost
- TruCluster_V1.6 / Cluster Patches:
60) Patch 0001.00 - Support for Reliable Datagram Messaging
61) Patch 0004.00 - Fix for Kernel Memory Fault On DRD Client Nodes
Or you may choose one of the following options:
62) ALL of the above
63) CANCEL selections and redisplay menus
64) EXIT without installing any patches
Enter your choices or press RETURN to redisplay menus.
Choices (for example, 1 2 4-6): 62
You are installing the following optional patches:
- DIGITAL_UNIX_V4.0F / Commands, Shells, & Utility Patches:
Patch 0019.00 - Fix For yacc
Patch 0020.00 - Cannot Use ipcs Cmd On System Not Booted With vmunix
Patch 0025.00 - Fix For ksh, file, tail, nawk, awk, And pax
Patch 0026.00 - Fix For defragment -V Option
Patch 0032.00 - mkdir -p Not Returning Error
Patch 0036.00 - volrootmir -a Cmd Fails
Patch 0037.00 - volrecover Not Returning Failed Status Code
Patch 0038.00 - quotaon Returns Incorrect Error Status
Patch 0040.00 - binmail Delivers Only Partial Messages
Patch 0041.00 - Fix For nroff Y2K Problem
Patch 0042.00 - Fixes For vrestore Command
Patch 0045.00 - Fix For sort -i Abort Problem
Patch 0047.00 - vi Puts Server Port INTO PASSALL MODE
Patch 0061.00 - Enhancement For makedepend Utility
Patch 0067.00 - mount Cmd Sometimes Kills Other Processes
Patch 0068.00 - nroff Incorrectly Translates Years After 1999
- DIGITAL_UNIX_V4.0F / Common Desktop Environment (CDE) Patches:
Patch 0005.00 - dtfile May Leave Defunct Processes
- DIGITAL_UNIX_V4.0F / Filesystem Patches:
Patch 0035.00 - Enhancement For verify Utility
Patch 0039.00 - System Panic When Accessing ISO9660 Format CDROM
Patch 0054.00 - AdvFS volumes Not Setting I/O Byte Transfer Size
Patch 0075.00 - chvol Read & Write Transfer Size Increased
- DIGITAL_UNIX_V4.0F / Hardware Configuration Patches:
Patch 0018.00 - Resolves Corrupt EV6 Binary Error Log Entries
Patch 0072.00 - Updates FORE ATM (lfa) driver to Rev. V1.0.14
- DIGITAL_UNIX_V4.0F / I/O Device Handling Patches:
Patch 0053.00 - Fix For spo_process_rsp Panic
Patch 0056.00 - KZPCA Host Bus Adapter May Hang
Patch 0058.00 - Additional Error Detection for FC Driver
Patch 0060.00 - Fix For spo_misc_errors errlog Entries
Patch 0073.00 - Problems With Driver Support For ELSA Gloria Synergy
- DIGITAL_UNIX_V4.0F / Kernel Patches:
Patch 0016.00 - Fixes Kernel Memory Fault Caused By SMP Race
Patch 0034.00 - Fix For kio Subsystem Panic
Patch 0044.00 - Fix For Kernel Memory Fault
Patch 0055.00 - New Functionality To Detect Unlinked Reference Files
- DIGITAL_UNIX_V4.0F / Library Patches:
Patch 0046.00 - Shared Library Fix For curses-based Applications
Patch 0048.00 - DECthreads Library Fix
Patch 0069.00 - Static Library Fix For curses-based Applications
Patch 0071.00 - Ladebug Enhancements
- DIGITAL_UNIX_V4.0F / Network Patches:
Patch 0008.00 - Fix For POP Mail Handler
Patch 0017.00 - Fix For BIND Server
Patch 0021.00 - Fix For XTI And DECnet/OSI
Patch 0022.00 - automount Daemon Hangs
Patch 0043.00 - Fix For XTI Over TCP/IP
Patch 0057.00 - Fixes Several NFS Problems
Patch 0059.00 - Characters Randomly Repeated Using tip
Patch 0066.00 - libxti/libtli Static Library Fix
- DIGITAL_UNIX_V4.0F / Security Related Patches:
Patch 0002.00 - Security (SSRT0571U)
Patch 0003.00 - Security (SSRT0585U)
Patch 0004.00 - Security (SSRT0580U)
Patch 0006.00 - Security (SSRT0600U)
Patch 0011.00 - Security (SSRT0596U)
Patch 0012.00 - Security (SSRT0567U)
Patch 0028.00 - Security (SSRT0556U)
Patch 0031.00 - Security (SSRT0563U)
- DIGITAL_UNIX_V4.0F / X11 Patches:
Patch 0007.00 - dxcalendar Reminder Displays Through dxpause Screen
Patch 0062.00 - Fix For Motif Drag-and-Drop
Patch 0063.00 - xfs Fails With Segmentation Fault
Patch 0070.00 - libXm Static Library Fix For Motif Drag-and-Drop
Patch 0074.00 - Fix For ELSA Gloria Synergy Graphics Board
- TruCluster_V1.6 / ASE Availability Manager (AM) Patches:
Patch 0002.00 - Fix For asedirector
Patch 0003.00 - DRD Permissions May Be Lost
- TruCluster_V1.6 / Cluster Patches:
Patch 0001.00 - Support for Reliable Datagram Messaging
Patch 0004.00 - Fix for Kernel Memory Fault On DRD Client Nodes
Is this correct? (y/n): y
***********************************************************************
=== Installing "Digital UNIX V4.0F":
Checking file system space required to install specified subsets:
File system space checked OK.
56 subset(s) will be installed.
Loading 1 of 56 subset(s)....
Patch: Fix For BIND Server
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 2 of 56 subset(s)....
Patch: Enhancement For makedepend Utility
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 3 of 56 subset(s)....
Patch: xfs Fails With Segmentation Fault
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 4 of 56 subset(s)....
Patch: Enhancement For verify Utility
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 5 of 56 subset(s)....
Patch: Fix For ELSA Gloria Synergy Graphics Board
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 6 of 56 subset(s)....
Patch: volrootmir -a Cmd Fails
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 7 of 56 subset(s)....
Patch: volrecover Not Returning Failed Status Code
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 8 of 56 subset(s)....
Patch: quotaon Returns Incorrect Error Status
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 9 of 56 subset(s)....
Patch: System Panic When Accessing ISO9660 Format CDROM
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 10 of 56 subset(s)....
Patch: binmail Delivers Only Partial Messages
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 11 of 56 subset(s)....
Patch: Fixes For vrestore Command
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 12 of 56 subset(s)....
Patch: Fix For XTI Over TCP/IP
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 13 of 56 subset(s)....
Patch: Fix For Motif Drag-and-Drop
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 14 of 56 subset(s)....
Patch: libXm Static Library Fix For Motif Drag-and-Drop
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 15 of 56 subset(s)....
Patch: mkdir -p Not Returning Error
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 16 of 56 subset(s)....
Patch: New Functionality To Detect Unlinked Reference Files
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 17 of 56 subset(s)....
Patch: KZPCA Host Bus Adapter May Hang
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 18 of 56 subset(s)....
Patch: Security (SSRT0571U)
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 19 of 56 subset(s)....
Patch: Fixes Several NFS Problems
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 20 of 56 subset(s)....
Patch: Security (SSRT0585U)
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 21 of 56 subset(s)....
Patch: Security (SSRT0580U)
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 22 of 56 subset(s)....
Patch: Additional Error Detection for FC Driver
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 23 of 56 subset(s)....
Patch: dtfile May Leave Defunct Processes
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 24 of 56 subset(s)....
Patch: Fix For nroff Y2K Problem
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 25 of 56 subset(s)....
Patch: Security (SSRT0600U)
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 26 of 56 subset(s)....
Patch: nroff Incorrectly Translates Years After 1999
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 27 of 56 subset(s)....
Patch: Fix For sort -i Abort Problem
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 28 of 56 subset(s)....
Patch: vi Puts Server Port INTO PASSALL MODE
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 29 of 56 subset(s)....
Patch: DECthreads Library Fix
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 30 of 56 subset(s)....
Patch: Ladebug Enhancements
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 31 of 56 subset(s)....
Patch: Resolves Corrupt EV6 Binary Error Log Entries
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 32 of 56 subset(s)....
Patch: Fix For kio Subsystem Panic
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 33 of 56 subset(s)....
Patch: Fix For Kernel Memory Fault
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 34 of 56 subset(s)....
Patch: Fix For spo_process_rsp Panic
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 35 of 56 subset(s)....
Patch: Problems With Driver Support For ELSA Gloria Synergy
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 36 of 56 subset(s)....
Patch: Characters Randomly Repeated Using tip
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 37 of 56 subset(s)....
Patch: Fix For spo_misc_errors errlog Entries
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 38 of 56 subset(s)....
Patch: Updates FORE ATM (lfa) driver to Rev. V1.0.14
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 39 of 56 subset(s)....
Patch: Shared Library Fix For curses-based Applications
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 40 of 56 subset(s)....
Patch: Static Library Fix For curses-based Applications
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 41 of 56 subset(s)....
Patch: Fix For XTI And DECnet/OSI
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 42 of 56 subset(s)....
Patch: Fix For yacc
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 43 of 56 subset(s)....
Patch: libxti/libtli Static Library Fix
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 44 of 56 subset(s)....
Patch: Cannot Use ipcs Cmd On System Not Booted With vmunix
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 45 of 56 subset(s)....
Patch: automount Daemon Hangs
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 46 of 56 subset(s)....
Patch: Security (SSRT0563U)
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 47 of 56 subset(s)....
Patch: mount Cmd Sometimes Kills Other Processes
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 48 of 56 subset(s)....
Patch: Fix For ksh, file, tail, nawk, awk, And pax
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 49 of 56 subset(s)....
Patch: Fix For defragment -V Option
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 50 of 56 subset(s)....
Patch: dxcalendar Reminder Displays Through dxpause Screen
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 51 of 56 subset(s)....
Patch: Fix For POP Mail Handler
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 52 of 56 subset(s)....
Patch: Security (SSRT0596U)
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 53 of 56 subset(s)....
Patch: Security (SSRT0567U)
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 54 of 56 subset(s)....
Patch: AdvFS volumes Not Setting I/O Byte Transfer Size
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 55 of 56 subset(s)....
Patch: Fixes Kernel Memory Fault Caused By SMP Race
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
Loading 56 of 56 subset(s)....
Patch: chvol Read & Write Transfer Size Increased
Copying from /usr/patch_kit/DIGITAL_UNIX_V4.0F/kit (disk)
Verifying
56 of 56 subset(s) installed successfully.
Configuring " atch: Fix For BIND Server " (OSFPAT00001700440)
Configuring "atch: Enhancement For makedepend Utility" (OSFPAT00006100440)
Configuring "atch: xfs Fails With Segmentation Fault" (OSFPAT00006300440)
Configuring "atch: Enhancement For verify Utility" (OSFPAT00003500440)
Configuring "atch: Fix For ELSA Gloria Synergy Graphics Board" (OSFPAT00007400440)
Configuring "atch: volrootmir -a Cmd Fails " (OSFPAT00003600440)
Configuring "atch: volrecover Not Returning Failed Status Code" (OSFPAT00003700440)
Configuring "atch: quotaon Returns Incorrect Error Status" (OSFPAT00003800440)
Configuring "atch: System Panic When Accessing ISO9660 Format CDROM" (OSFPAT00003900440)
Configuring "atch: binmail Delivers Only Partial Messages" (OSFPAT00004000440)
Configuring "Patch: Fixes For vrestore Command " (OSFPAT00004200440)
Configuring "Patch: Fix For XTI Over TCP/IP " (OSFPAT00004300440)
Configuring "Patch: Fix For Motif Drag-and-Drop " (OSFPAT00006200440)
Configuring "Patch: libXm Static Library Fix For Motif Drag-and-Drop" (OSFPAT00007000440)
Configuring "Patch: mkdir -p Not Returning Error" (OSFPAT00003200440)
Configuring "Patch: New Functionality To Detect Unlinked Reference Files" (OSFPAT00005500440)
Configuring "Patch: KZPCA Host Bus Adapter May Hang" (OSFPAT00005600440)
Configuring "Patch: Security (SSRT0571U) " (OSFPAT00000200440)
Configuring "Patch: Fixes Several NFS Problems " (OSFPAT00005700440)
Configuring "Patch: Security (SSRT0585U) " (OSFPAT00000300440)
Configuring "Patch: Security (SSRT0580U) " (OSFPAT00000400440)
Configuring "Patch: Additional Error Detection for FC Driver" (OSFPAT00005800440)
Configuring "Patch: dtfile May Leave Defunct Processes" (OSFPAT00000500440)
Configuring "Patch: Fix For nroff Y2K Problem " (OSFPAT00004100440)
Configuring "Patch: Security (SSRT0600U) " (OSFPAT00000600440)
Configuring "Patch: nroff Incorrectly Translates Years After 1999" (OSFPAT00006800440)
Configuring "Patch: Fix For sort -i Abort Problem" (OSFPAT00004500440)
Configuring "Patch: vi Puts Server Port INTO PASSALL MODE" (OSFPAT00004700440)
Configuring "Patch: DECthreads Library Fix " (OSFPAT00004800440)
Configuring "Patch: Ladebug Enhancements " (OSFPAT00007100440)
Configuring "Patch: Resolves Corrupt EV6 Binary Error Log Entries" (OSFPAT00001800440)
Configuring "Patch: Fix For kio Subsystem Panic " (OSFPAT00003400440)
Configuring "Patch: Fix For Kernel Memory Fault " (OSFPAT00004400440)
Configuring "Patch: Fix For spo_process_rsp Panic" (OSFPAT00005300440)
Configuring "Patch: Problems With Driver Support For ELSA Gloria Synergy" (OSFPAT00007300440)
Configuring "Patch: Characters Randomly Repeated Using tip" (OSFPAT00005900440)
Configuring "Patch: Fix For spo_misc_errors errlog Entries" (OSFPAT00006000440)
Configuring "Patch: Updates FORE ATM (lfa) driver to Rev. V1.0.14" (OSFPAT00007200440)
Configuring "Patch: Shared Library Fix For curses-based Applications" (OSFPAT00004600440)
Configuring "Patch: Static Library Fix For curses-based Applications" (OSFPAT00006900440)
Configuring "Patch: Fix For XTI And DECnet/OSI " (OSFPAT00002100440)
Configuring "Patch: Fix For yacc " (OSFPAT00001900440)
Configuring "Patch: libxti/libtli Static Library Fix" (OSFPAT00006600440)
Configuring "Patch: Cannot Use ipcs Cmd On System Not Booted With vmunix" (OSFPAT00002000440)
Configuring "Patch: automount Daemon Hangs " (OSFPAT00002200440)
Configuring "Patch: Security (SSRT0563U) " (OSFPAT00003100440)
Configuring "Patch: mount Cmd Sometimes Kills Other Processes" (OSFPAT00006700440)
Configuring "Patch: Fix For ksh, file, tail, nawk, awk, And pax" (OSFPAT00002500440)
Configuring "Patch: Fix For defragment -V Option" (OSFPAT00002600440)
Configuring "Patch: dxcalendar Reminder Displays Through dxpause Screen" (OSFPAT00000700440)
Configuring "Patch: Fix For POP Mail Handler " (OSFPAT00000800440)
Configuring "Patch: Security (SSRT0596U) " (OSFPAT00001100440)
Configuring "Patch: Security (SSRT0567U) " (OSFPAT00001200440)
Configuring "Patch: AdvFS volumes Not Setting I/O Byte Transfer Size" (OSFPAT00005400440)
Configuring "Patch: Fixes Kernel Memory Fault Caused By SMP Race" (OSFPAT00001600440)
Configuring "Patch: chvol Read & Write Transfer Size Increased" (OSFPAT00007500440)
=== Installing "TruCluster Available Server Software V1.6":
Checking file system space required to install specified subsets:
File system space checked OK.
4 subset(s) will be installed.
Loading 1 of 4 subset(s)....
Patch: Fix For asedirector
Copying from /usr/patch_kit/TruCluster_V1.6/kit (disk)
Verifying
Loading 2 of 4 subset(s)....
Patch: DRD Permissions May Be Lost
Copying from /usr/patch_kit/TruCluster_V1.6/kit (disk)
Verifying
Loading 3 of 4 subset(s)....
Patch: Fix for Kernel Memory Fault On DRD Client Nodes
Copying from /usr/patch_kit/TruCluster_V1.6/kit (disk)
Verifying
Loading 4 of 4 subset(s)....
Patch: Support for Reliable Datagram Messaging
Copying from /usr/patch_kit/TruCluster_V1.6/kit (disk)
Verifying
4 of 4 subset(s) installed successfully.
Configuring "Patch: Fix For asedirector " (TCRPAT00000200160)
Configuring "Patch: DRD Permissions May Be Lost " (TCRPAT00000300160)
Configuring "Patch: Fix for Kernel Memory Fault On DRD Client Nodes" (TCRPAT00000400160)
Configuring "Patch: Support for Reliable Datagram Messaging" (TCRPAT00000100160)
* A kernel rebuild is required for the successfully installed patch(es).
DIGITAL UNIX Patch Utility (Rev. 25-10)
==========================
- This dupatch session is logged in //var/adm/patch/log/session.log
Main Menu:
---------
1) Patch Installation
2) Patch Deletion
3) Patch Documentation
4) Patch Tracking
5) Patch Baseline Analysis/Adjustment
h) Help on Command Line Interface
q) Quit
Enter your choice: q
10 . 第一次运行 # asemgr 在其中一台主机运行.
# asemgr
Enter a comma-separated list of member systems's interfaces on the cluster
interconnect within ASE 1.
Enter Members: dbs1mc,as2mc
Member List: dbs1mc,as2mc
Is this correct (y/n) [y]: y
TruCluster Production Server (ASE)
ASE Main Menu
a) Managing the ASE -->;
m) Managing ASE Services -->;
s) Obtaining ASE Status -->;
x) Exit ?) Help
Enter your choice: a
Managing the ASE
a) Add a member
d) Delete a member
n) Modify the network configuration
m) Display the status of the members
C) Display the configuration of the ASE database
l) Set the logging level
e) Edit the error alert script
t) Test the error alert script
) Enable ASE V1.6 functionality
q) Quit (back to the Main Menu)
x) Exit ?) Help
Enter your choice [q]: m
Member Status
Member: Host Status: Agent Status:
dbs1mc UP RUNNING
as2mc UP RUNNING
Press 'Return' to continue:
Managing the ASE
a) Add a member
d) Delete a member
n) Modify the network configuration
m) Display the status of the members
C) Display the configuration of the ASE database
l) Set the logging level
e) Edit the error alert script
t) Test the error alert script
) Enable ASE V1.5 functionality
q) Quit (back to the Main Menu)
x) Exit ?) Help
Enter your choice [q]: C
!! -----------------------------------------------------------------------
!! ASE database /var/ase/config/asecdb
!! -----------------------------------------------------------------------
ASE functionality version: V1.6
ASE logging level: Notice
Number of ASE members: 2
Primary network default retry settings: (see /etc/hsm.conf for overrides)
Primary network max retries: 4
Primary network time between retries: 10
Primary network time between successes: 30
Primary network time between failures: 50
Backup network default retry settings: (see /etc/hsm.conf for overrides)
Backup network max retries: 4
Backup network time between retries: 10
Backup network time between successes: 300
Backup network time between failures: 300
AM default retry settings: (see /etc/hsm.conf for overrides)
AM max retries: 2
AM time between retries: NA
AM time between successes: 20
AM time between failures: 300
Network interface default retry settings: (see /etc/hsm.conf for overrides)
Network interface max retries: 4
Network interface time between retries: 10
Network interface time between successes: 30
Network interface time between failures: 50
!! -----------------------------------------------------------------------
!! ASE database information
!! -----------------------------------------------------------------------
ASE database format: V1.6
ASE database created by product: TruCluster Production Server
ASE database created by member: dbs1mc
ASE database timestamp version: 1
ASE database last updated on: Wed Dec 31 18:00:01 1969
ASE database last updated by: dbs1mc
ASE database revision number: 0
!! -----------------------------------------------------------------------
!! ASE network interface configuration
!! -----------------------------------------------------------------------
Member name: dbs1mc
Member IP address: 10.0.0.1
Daemon communication use: Primary
Member aliveness ping use: Primary
Monitor interface setting: ignore
Member name: as2mc
Member IP address: 10.0.0.2
Daemon communication use: Primary
Member aliveness ping use: Primary
Monitor interface setting: ignore
!! -----------------------------------------------------------------------
!! ASE alert script information
!! -----------------------------------------------------------------------
System alert script name: /var/ase/sbin/ase_run_sh
System alert script timeout: 20
@startText alert_script_0
# *****************************************************************
# * *
# * Copyright (c) Digital Equipment Corporation, 1991, 1999 *
# * *
# * All Rights Reserved. Unpublished rights reserved under *
# * the copyright laws of the United States. *
# * *
# * The software contained on this media is proprietary to *
# * and embodies the confidential technology of Digital *
# * Equipment Corporation. Possession, use, duplication or *
# * dissemination of the software and media is authorized only *
# * pursuant to a valid written license from Digital Equipment *
# * Corporation. *
# * *
# * RESTRICTED RIGHTS LEGEND Use, duplication, or disclosure *
# * by the U.S. Government is subject to restrictions as set *
# * forth in Subparagraph (c)(1)(ii) of DFARS 252.227-7013, *
# * or in FAR 52.227-19, as applicable. *
# *****************************************************************
# @(#)$RCSfile: ase_logcrit_sh.sh,v $ $Revision: 1.2.7.2 $ (DEC) $Date: 1996/11/21 17:07:45 $
ADMIN="root"
PATH=/sbin:/usr/sbin:/usr/bin
export PATH
TIME=`date +"%D %T"`
ERR_FILE=/var/ase/tmp/alertMsg
HSM_STATUS=`awk -F: '{print $2}' ${ERR_FILE} | sed 's/ //g'`
case "${HSM_STATUS}" in
HSM_PATH_STATUS)
awk -f /var/ase/lib/path_status_awk ${ERR_FILE}
;;
HSM_NI_STATUS)
awk -f /var/ase/lib/ni_status_awk ${ERR_FILE}
;;
esac
if [ -n "${ADMIN}" ]; then
if [ ! -f "${ERR_FILE}" ]; then
echo "Critical ASE error or status change detected on `date`" >; ${ERR_FILE}
fi
mailx -s "***Critical ASE error or status change - ${TIME}" ${ADMIN} < $
{ERR_FILE}
fi
rm -f ${ERR_FILE}
@endText alert_script_0
Managing the ASE
a) Add a member
d) Delete a member
n) Modify the network configuration
m) Display the status of the members
C) Display the configuration of the ASE database
l) Set the logging level
e) Edit the error alert script
t) Test the error alert script
) Enable ASE V1.5 functionality
q) Quit (back to the Main Menu) x) Exit ?) Help
Enter your choice [q]: x
退出 asemgr 管理菜单.
添加 TIE-BREAK DISK 分别在两台主机运行.
# cnxset -d /dev/rrz8c
Verifying: /dev/rrz8c
/dev/rrz8c is unknown to the local ASE
Performing further checks on this device...
/dev/rrz8c is a disk
/dev/rrz8c will be configured anyway
/dev/rrz8c is an acceptable device
Local configuration updated...You must also update all other nodes
# cnxshow
Cluster View from dbs1mc
Director: dbs1mc Suspended: No
Node monitor using tie-breaking disk: /dev/rrz8c
Hostname Cluster I/F CS_ID Incarnation Comm Okay Member
-----------------------------------------------------------------------------
dbs1.dlc.dec. dbs1mc 0001,0001 0000000000074ff0 Yes Yes
as2.dlc.dec. as2mc 0001,0002 00000000000e5b40 Yes Yes
# clu_ivp -v
Cluster Installation Verification Procedure (IVP)
Running in verbose mode ...
Successfully verified that the TCRCOMMON subset is installed.
Successfully verified that the TCRCONF subset is installed.
Successfully verified that the TCRMCA subset is installed.
Successfully verified that the TCRASE subset is installed.
Successfully verified that the TCRDSVC subset is installed.
Successfully found CLUSTER_NET dbs1mc in /etc/rc.config
Successfully found mc0 interface configured in /etc/rc.config
Successfully found ASE_ID of 1 as a parameter in /etc/rc.config
Successfully found host entry in /etc/hosts.
Successfully found cluster_cnx in /etc/hosts.
Successfully verified host resolution order in /etc/svc.conf.
Successfully verified that gated is running.
Successfully pinged node dbs1mc over the cluster interconnect.
Successfully pinged alias cluster_cnx over the cluster interconnect.
Successfully verified that the booted kernel /vmunix contains req. support
Successfully verified that the clubase kernel subsystem is configured.
Successfully verified that the rm kernel subsystem is configured.
Successfully verified that the drd kernel subsystem is configured.
Successfully verified that the ccomsub kernel subsystem is configured.
Successfully verified that the dlmsl kernel subsystem is configured.
Successfully verified that the cnxagent kernel subsystem is configured.
Successfully verified that the dlm kernel subsystem is configured.
Successfully verified that the ccm kernel subsystem is configured.
Successfully verified that the mcs kernel subsystem is configured.
Successfully retrieved version: TruCluster Software V1.6 (Rev. 227); 04/09/99 14:17
Successfully verified that cluster_disable is 0.
Successfully verified an ASE member list.
Found device /dev/am_host01.
Found device /dev/am_host02.
Found device /dev/am_host03.
Found device /dev/am_host04.
Found device /dev/am_host05.
Found device /dev/am_host06.
Found device /dev/am_host07.
Found device /dev/rase.
Found device /dev/am.
Verified existence of all required ASE device files.
Successfully verified that the cluster LMF PAK is registered.
Successfully verified that the cnxpingd daemon is running.
Verified that the cnxpingd pid file is consistent.
Successfully verified that the cnxmond daemon is running.
Verified that the cnxmond pid file is consistent.
Successfully verified that the cnxagentd daemon is running.
Verified that the cnxagentd pid file is consistent.
Verified that the cnxagentd daemon is registered with the portmapper.
Successfully verified that the bssd daemon is running.
Verified that the bssd daemon is registered with the portmapper.
Successfully verified that the aseagent daemon is running.
Verified that the aseagent pid file is consistent.
Verified that the aseagent daemon is registered with the portmapper.
Successfully verified that the asehsm daemon is running.
Verified that the asehsm pid file is consistent.
Verified that the asehsm daemon is registered with the portmapper.
Calling cnxshow for configuration verification...
Successfully verified that a CNX director exists.
Successfully verified that the CNX director is not suspended.
Successfully verified that a tie-breaker disk is specified.
Successfully verified CNX comm state of dbs1mc.
Successfully verified that dbs1mc is a CNX member.
Successfully verified CNX comm state of as2mc.
Successfully verified that as2mc is a CNX member.
Successfully verified that clocks on as2mc and dbs1mc are within 15 seconds.
CNX ivp tests exiting successfully with no errors found.
Successfully passed CNX validation tests.
Calling drd_ivp for DRD subsystem verification...
Cluster Configuration Information
Hostname ASE_ID BSSD BSSD DRD Lic
Reg Resp Conf Reg
----------------------------------------------------------
dbs1mc 1 Yes Yes Yes Yes
as2mc 1 Yes Yes Yes Yes
DRD configuration validation tests succeeded.
ASE_ID validation tests succeeded.
Successfully passed drd_ivp validation tests.
ERROR: The console variable boot_reset is "OFF", not "ON".
Resolution: halt to the console prompt and set the console variable.
Also verify that if the bus_probe_algorithm is present on your system
its value must be set to "new".
Successfully found MC character device /dev/pmcs0.
Successfully found MC character device /dev/pmcs1.
Successfully found MC character device /dev/pmcs2.
Successfully verified existence of all required MC character device files.
Found these supported SCSI controllers:
------------------------------
isp0 is scsi0
isp1 is scsi1
Scanning EDT............
Found these devices on bus scsi0:
device vendor drive firmware
------ ------ ----- --------
rrz0c DEC RZ1CB-CA LYJ0
rrz4c DEC RRD46 1337
Found these devices on bus scsi1:
device vendor drive firmware
------ ------ ----- --------
rrz8c DEC HSZ70 V70Z
rrzb8c DEC HSZ70 V70Z
rrzc8c DEC HSZ70CCL V70Z
rrz9c DEC HSZ70 V70Z
rrzb9c DEC HSZ70 V70Z
rrz10c DEC HSZ70 V70Z
rrz11c DEC HSZ70 V70Z
Please verify firmware levels against the release notes.
Firmware rev 5.4-110 for CPU type 1000A
Firmware rev 5.57 on SCSI adapter isp0:
Firmware rev 5.57 on SCSI adapter isp1:
Please verify firmware levels against the release notes.
Installation verification failed, 1 error detected
TruCluster 1.6 安装完毕, 接着配置 TruCluster!
11. 配置 DRD_Service
# asemgr
TruCluster Production Server (ASE)
ASE Main Menu
a) Managing the ASE -->;
m) Managing ASE Services -->;
s) Obtaining ASE Status -->;
x) Exit ?) Help
Enter your choice: m
Managing ASE Services
c) Service Configuration -->;
r) Relocate a service
on) Set a service on line
off) Set a service off line
res) Restart a service
s) Display the status of a service
a) Advanced Utilities -->;
q) Quit (back to the Main Menu)
x) Exit ?) Help
Enter your choice [q]: c
Service Configuration
a) Add a new service
m) Modify a service
o) Modify a service without interrupting its availability
d) Delete a service
s) Display the status of a service
c) Display the configuration of a service
q) Quit (back to Managing ASE Services)
x) Exit ?) Help
Enter your choice [q]: a
Adding a service
Select the type of service:
1) NFS service
2) Disk service
3) User-defined service
4) DRD service
5) Tape service
q) Quit without adding a service
x) Exit ?) Help
Enter your choice [1]: 4
You are now adding a new DRD disk service to your ASE.
A DRD disk service is comprised of any number of DRDs which can be
created from a single raw disk partition or LSM volume which will
be accessible from all members in the cluster.
Note: If using a raw disk partition please be sure that the character
device special file exists on all members which are in this ASE.
DRD Service Name
The name of a DRD disk service must be a unique service name within this ASE.
Enter the DRD disk service name ('q' to quit): DRD_Service_1
You will now be prompted to enter a list of devices comprising
the DRD service, enter Return when you have completed the list.
Enter an existing character device special file for one of the following:
a physical device (ie /dev/rrz1c)
a LSM volume (ie /dev/rvol/dg/vol01)
To end the list, press the Return key at the prompt.
Enter character device special file: /dev/rrz16a
Following is a list of device(s) and pubpath(s) for disk group drd_dg1:
DEVICE PUBPATH
rz10 /dev/rz10g
Is this correct (y/n) [y]: y
Enter an existing character device special file for one of the following:
a physical device (ie /dev/rrz1c)
a LSM volume (ie /dev/rvol/dg/vol01)
To end the list, press the Return key at the prompt.
Enter character device special file: /dev/rrz16b
Enter an existing character device special file for one of the following:
a physical device (ie /dev/rrz1c)
a LSM volume (ie /dev/rvol/dg/vol01)
To end the list, press the Return key at the prompt.
Enter character device special file: /dev/rrz16d
Enter character device special file:
DRD Device Special File: /dev/rdrd/drd10001
Underlying Storage: /dev/rrz16a
drd_service rz10
DRD Device Special File: /dev/rdrd/drd10002
Underlying Storage: /dev/rrz16b
drd_service rz10
DRD Device Special File: /dev/rdrd/drd10003
Underlying Storage: /dev/rrz16d
drd_service rz10
drd_mknod -f drd10001
drd_mknod -f drd10002
drd_mknod -f drd10003
drd_mknod -f drd10004
drd_mknod -f drd10005
drd_mknod -f drd10006
Selecting an Automatic Service Placement (ASP) Policy
Select the policy you want ASE to use when choosing a member
to run this service:
b) Balanced Service Distribution
f) Favor Members
r) Restrict to Favored Members
?) Help
Enter your choice : f
Selecting an Automatic Service Placement (ASP) Policy
Select the favored member(s) IN ORDER for service 'DRD_Service_1':
1) dbs1
2) dbs2
q) No favored members
?) Help
Enter a comma-separated list [q]: 1,2
Selecting an Automatic Service Placement (ASP) Policy
Do you want ASE to relocate this service to a more highly favored member
if one becomes available while this service is running (y/n/?): y
Enter 'y' to add Service 'DRD_Service_1' (y/n): y
Adding service...
Starting service...
..
Service DRD_Service_1 successfully added..
Service Configuration
a) Add a new service
m) Modify a service
o) Modify a service without interrupting its availability
d) Delete a service
s) Display the status of a service
c) Display the configuration of a service
q) Quit (back to Managing ASE Services)
x) Exit ?) Help
12. TruCluster 配置完后,系统安装完成.
通过 DRD 服务的顺利切换, 结束 Alpha 4100 的安装.
 |
|
免费注册
发表于 2002-05-27 11:26
