免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
最近访问板块 发新帖
查看: 3690 | 回复: 0

[存储网络] 光纤交换机密码重置 [复制链接]

论坛徽章:
0
发表于 2010-05-11 14:02 |显示全部楼层
往往我们会忘记曾经设置过的密码,导致无法正常登陆设备,因此需要重置密码,博科光纤交换机的默认用户名是admin,默认密码是password。但博科交换机是没有reset按钮的,必须通过console线连接通过命令重置。
博科300的os是用的linux 2.6的核心,最高权限的管理帐号是root。重置交换机密码就是用这个帐号。
swd77 login: root
Password:  fibranne
使用该帐号登陆后会出现下面的信息:
Disclaimer for Root and Factory Accounts Usage!
This Fibre Channel switch is equipped with Root and Factory accounts
that are intended for diagnostics and debugging purposes solely by
the Equipment vendor's trained engineers. Improper use of the
functionality made available through the Root or Factory account could
cause significant harm and disruption to the operation of the SAN fabric.
Your use of the functionality made available through the Root or Factory
account is at your sole risk and you assume all liability resulting from
such use. The Equipment vendor shall have no liability for any losses
or damages arising from or relating to the use of the Root or Factory
account (and the functionality enabled thereby) by anyone other than
the Equipment vendor's authorized engineers.

Proceeding with the usage of this switch as the Root or Factory user
explicitly indicates your agreement to the terms of this disclaimer.
Please change passwords for switch default accounts now.
Use Control-C to exit or press 'Enter' key to proceed.
这里用Control-C结束就行了,如果回车会让分别设置各个帐号的密码,出现如下信息:
Warning:  Access to  the Root  and Factory accounts may be required  for
proper  support  of  the switch.  Please  ensure  the Root  and  Factory
passwords are  documented in a secure location.  Recovery of a lost Root
or Factory password will result in fabric downtime.
for user - root
Changing password for root
Enter new password:
Password unchanged.
passwd: Authentication token manipulation error
Please change passwords for switch default accounts now.
for user - factory
Changing password for factory
Enter new password:
Password unchanged.
passwd: Authentication token manipulation error
Please change passwords for switch default accounts now.
for user - admin
Changing password for admin
Enter new password:
Password unchanged.
passwd: Authentication token manipulation error
Please change passwords for switch default accounts now.
for user - user
Changing password for user
Enter new password:
Password unchanged.
passwd: Authentication token manipulation error

登陆后是用passwddefault命令恢复出厂密码
swd77:root> passwddefault
Password policies are already set to default.
All account passwords have been successfully set to factory default.
swd77:root>
至此已经恢复了交换机出厂密码设置,立即可以用默认用户名admin,默认密码password登陆设备进行管理和配置了。

欲知更多的产品采购及技术支持信息,请访问公司网站:www.smartion.net,
电话:0755-25884800.刘先生。
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP