求教如何设置Linux路由

statemood

请教各位大虾如何设置Linux路由. 详述如下:
Linux主机为opensuse 11.3 x86_64,
eth0 100M 网卡,
eth1 1000M 网卡,
eth2 1000M 网卡,
ADSL1  2M,
ADSL2  2M,
---------------------------
想设置为ADSL1和ADSL2分别接入eth0和eth1,由两块网卡pppoe,Linux主机启用DHCP,网段 10.0.0.0/255.255.0.0,eth2接入交换机. 这样该怎样配置?

zfsoft2206

回复 1# statemood

1. 
   
2. route add default gw 10.0.xxx.xxx dev eth2
   
3. route add -net 10.0.0.0 netmask 255.255.0.0 dev eth2
   
4. route add -net 10.xxx.xxx.0 netmask 255.255.255.0 dev eth0
   
5. route add -net 10.xxx.xxx.0 netmask 255.255.255.0 dev eth1
   
6. route add -net 10.xxx.xxx.xx netmask 255.255.255.255 dev ppp0 #adsl1
   
7. route add -net 10.xxx.xxx.xx netmask 255.255.255.255 dev ppp1 #adsl2
   

复制代码

这个需要测试哦

love4u

专门用一台LINUX用做路由器?还不如用ROS