- 论坛徽章:
- 0
|
昨天在一台E8A的en1口上配置ip,槽位是P1-C2-T2
用lscfg -vp|grep ent查看ent状态 均为Available.
在其他口配置均正确.en2口配置ip为10.0.80.4 掩码255.255.255.0 没有配其他信息
接口状态如下
# lsdev -c adapter
ent0 Available 06-00 2-Port 10/100/1000 Base-TX PCI-Express Adapter (14104003)
ent1 Available 06-01 2-Port 10/100/1000 Base-TX PCI-Express Adapter (14104003)
ent2 Available 00-00 2-Port 10/100/1000 Base-TX PCI-Express Adapter (14104003)
ent3 Available 00-01 2-Port 10/100/1000 Base-TX PCI-Express Adapter (14104003)
ent4 Available Logical Host Ethernet Port (lp-hea)
ent5 Available Logical Host Ethernet Port (lp-hea)
fcs0 Available 07-00 4Gb FC PCI Express Adapter (df1000fe)
fcs1 Available 07-01 4Gb FC PCI Express Adapter (df1000fe)
lhea0 Available Logical Host Ethernet Adapter (l-hea)
sissas0 Available 01-08 PCI-X266 Planar 3Gb SAS Adapter
usbhc0 Available 02-08 USB Host Controller (33103500)
usbhc1 Available 02-09 USB Host Controller (33103500)
usbhc2 Available 02-0a USB Enhanced Host Controller (3310e000)
vsa0 Available LPAR Virtual Serial Adapter
vsa1 Available LPAR Virtual Serial Adapter
但是配置IP后报错如下
Minimum Configuration & Startup
To Delete existing configuration data, please use Further Configuration menus
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[MORE...2] [Entry Fields]
Network MASK (dotted decimal) [255.255.255.0]
* Network INTERFACEted decimal) [en1
NAMESERVER
Internet ADDRESS (dotted decimal) []
DOMAIN Name []
Default Gateway
Address (dotted decimal or symbolic name) []
Cost [] #
Do Active Dead Gateway Detection? no +
Your CABLE Type N/A +
START Now yes +
[BOTTOM]
F1=Help lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk
Esc+5=Reset x Running command... x
F9=Shell mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj
COMMAND STATUS
Command: running stdout: yes stderr: no
Before command completion, additional instructions may appear below.
[MORE...7]
0821-103 : The command /usr/sbin/ifconfig en1 inet 10.0.80.6 arp netmask 255.25
5.255.0 mtu 1500 up failed.
0821-007 cfgif: ifconfig command failed.
The status of"en1" Interface in the current running system is uncertain.
0821-103 : The command /usr/lib/methods/cfgif -len1 failed.
0821-510 ifconfig: error calling entry point for /usr/lib/drivers/if_en: A syste
m call received a parameter that is not valid.
0821-103 : The command /usr/sbin/ifconfig en1 inet 10.0.80.6 arp netmask 255.255
.255.0 mtu 1500 up failed.
0821-229 chgif: ifconfig command failed.
The status of"en1" Interface in the current running system is uncertain.
mktcpip: Problem with command: chdev
, return code = 1
[BOTTOM]
rmdev -dl en1
rmdev -dl ent1 删除这个端口后cfgmgr -v
再配置IP还是失败 出错信息依然
收藏 分享 |
|
免费注册
发表于 2010-08-05 09:37
