suse 10 sp3 qlogic 驱动问题

wangdonsy

os DL 380 G7  
hp EVA 4400

insmod qla2xxx.ko 后
dmesg 信息如下：
光交换机后面的灯一会灭一会变黄，  NO_light 和 NO_sync 之间切换 ,有遇到过这个问题的吗

1. 
   
2. qla2xxx: disagrees about version of symbol struct_module
   
3. QLogic Fibre Channel HBA Driver
   
4. ACPI: PCI Interrupt 0000:0c:00.0[A] -> Link [I0B1] -> GSI 33 (level, high) -> IRQ 209
   
5. qla2xxx 0000:0c:00.0: Found an ISP2532, irq 209, iobase 0xf89d6000
   
6. qla2xxx 0000:0c:00.0: Configuring PCI space...
   
7. PCI: Setting latency timer of device 0000:0c:00.0 to 64
   
8. qla2xxx 0000:0c:00.0: Configure NVRAM parameters...
   
9. qla2xxx 0000:0c:00.0: Verifying loaded RISC code...
   
10. qla2xxx 0000:0c:00.0: Firmware image unavailable.
    
11. qla2xxx 0000:0c:00.0: Firmware images can be retrieved from: ftp://ftp.qlogic.com/outgoing/linux/firmware/.
    
12. qla2xxx 0000:0c:00.0: FW: Loading from flash (20000)...
    
13. qla2xxx 0000:0c:00.0: Allocated (64 KB) for EFT...
    
14. qla2xxx 0000:0c:00.0: Allocated (1286 KB) for firmware dump...
    
15. qla2xxx 0000:0c:00.0: Unable to read FCP priority data.
    
16. scsi0 : qla2xxx
    
17. qla2xxx 0000:0c:00.0:
    
18. QLogic Fibre Channel HBA Driver: 8.03.00.13.10.3-k4
    
19.   QLogic HPAK344A -
    
20.   ISP2532: PCIe (5.0GT/s x4) @ 0000:0c:00.0 hdma+, host#=0, fw=4.04.04 (80)
    
21. qla2xxx 0000:0c:00.0: LIP reset occured (f700).
    
22. qla2xxx 0000:0c:00.0: Cable is unplugged...
    

复制代码

jiecho

查物理链路。

wangdonsy

物理连路？
光交换上面的端口接其他服务器是好的，
难到是380G7上面的光纤模块有问题？

deadwind

我此前遇到类似现象有两次一次是重插拔光纤线，一次是交换机端口故障
所以倾向物理链路问题，LZ能确认光纤线没问题，可以考虑把两端的SFP重插拔，交换机端口disable/enable，或者换端口，总之就是物理层的所有都替换一下做个确认

wangdonsy

交换机端口没问题，接到另外一台sun t5440 上面好着。
换了个驱动，灯的状态还是一样

1. 
   
2. ACPI: PCI interrupt for device 0000:0c:00.0 disabled
   
3. QLogic Fibre Channel HBA Driver: 8.02.23-fo
   
4. ACPI: PCI Interrupt 0000:0c:00.0[A] -> Link [I0B1] -> GSI 33 (level, high) -> IRQ 209
   
5. qla2xxx 0000:0c:00.0: Found an ISP2532, irq 209, iobase 0xf8972000
   
6. qla2xxx 0000:0c:00.0: Configuring PCI space...
   
7. PCI: Setting latency timer of device 0000:0c:00.0 to 64
   
8. qla2xxx 0000:0c:00.0: Configure NVRAM parameters...
   
9. qla2xxx 0000:0c:00.0: Verifying loaded RISC code...
   
10. cpuid_level = 5.
    
11. qla2xxx 0000:0c:00.0: Allocated (64 KB) for FCE...
    
12. qla2xxx 0000:0c:00.0: Allocated (64 KB) for EFT...
    
13. qla2xxx 0000:0c:00.0: Allocated (1478 KB) for firmware dump...
    
14. qla2xxx 0000:0c:00.0: Waiting for LIP to complete...
    
15. qla2xxx 0000:0c:00.0: LIP reset occurred (f700).
    
16. cpuid_level = 5.
    
17. qla2xxx 0000:0c:00.0: Cable is unplugged...
    
18. scsi-qla0-adapter-port=50014380042521c0\;
    
19. scsi2 : qla2xxx
    
20. qla2xxx 0000:0c:00.0:
    
21. QLogic Fibre Channel HBA Driver: 8.02.23-fo
    
22.   QLogic HPAK344A - HP 8Gb Single Channel PCI-e 2.0 FC HBA
    
23.   ISP2532: PCIe (5.0GT/s x4) @ 0000:0c:00.0 hdma+, host#=2, fw=4.06.03
    
24. 
    

复制代码